Availability: | |
---|---|
Quantity: | |
| |
DNJJ5121TQX6
DFAC/FAW/SHACMAN/HOWO/JAC /ISUZU/JMC
8705909990
Customize FOTON Truck Mounted Guardrail Post Drivers And Pounder
with Drilling Device Screw Air Compressor And Hydraulic Pile HammerSpecial device :Highway Guardrail Drilling Machine vibro machine piling machine
Product model | DNJJ5121TQX6 |
Chassis model | FOTON BJ1128VGJEA-FK |
Curb weight | 10080kg |
Maximum total mass | 11995kg |
Rated power | 112kw |
Overall dimensions of vehicle | 7050×2360×3450mm |
System working pressure | 16 Mpa~20Mpa |
Hydraulic hammer model | YC230/YC260 |
Pile pulling force | 20t (with 78.4 KN/96. 5KN frequency vibration) |
Hydraulic hammer working height | 600-2700 mm |
For Driving, pulling and drilling the guardrail repair
Highway Fence Collision Barrier Repair Vehicle for Guardrail Maintenance
Highroad Guardrail Repair Vehicle
* Equipped with hydraulic pile and extraction device, the equipment can be used to pull out damaged post and replaced new one completely with hydraulic system.
* The vehicle can be rotated 260°and no need to be turned the direction during driving and extracting guardrail post work.
* The truck mounted pile driver become more effeciency and save labour cost thanks to its capacity of carrying more than 1T repair materials like guardrail post as well as the necessary road signs, make it best solution for small jobs in different location.
Highway Guardrail Construction Pile Driver
Highway Fence Collision Barrier Repair Vehicle for Guardrail Maintenance Highroad Guardrail Repair Vehicle
The power of the whole working device is taken through the chassis, which has low use cost and simple structure.
Adopting full hydraulic control technology, it is easy to operate and control and realize overload protection, with smooth work and high working efficiency.
The vehicle-mounted working platform can rotate 260 degrees, so the whole vehicle does not need to turn around during construction on the left and right sides.
1.1 Pile Driving Function: NJ Series Highway Guardrail Post Driver Truck is specially designed for road maintenance work for the road safety barriers and guard rail posts.
1.2 Pile Extracting Function: With the same equipment and hydraulic system for extracting poorly driven or incorrectly positioned posts or road maintenance work, it is a professional machine for extracting the posts out of any conditions of ground.
2. Features
2.1 NJ Series Highway Guardrail Post Driver Truck is composed of truck chassis, upper column, hydraulic system, hydraulic hammer, control system, post driving and extracting equipment. It has the characters of good mobility, low oil consumption, reliable brake system, quick and exact positioning, humanized design, easy operation, high efficiency.
2.2 The up and down, longitudinal and transverse shift, horizontal slide and rotation of the column are realized through hydraulic system.
2.3 The hydraulic hammer is installed onto the upper column and be downward and upward along the track of the column for pile driving and extracting working by hydraulic system. When extracting guard rail posts, the extractable supporting foot is hydraulically positioned on the ground, for enhanced stability and safe pile extraction.
2.4 The control system is equipped with multiple directional control valve and centralized hydraulic control rods which makes the operation simple and convenient.
2.5 It can install piles up to 3m (9.84’) in length, but on request the machine can be supplied with extension columns which can install piles up to 3.5m (11.48’) or even 4m (13.12’) long.
2.6 The equipment does not need to turn the direction during driving and extracting the guardrail posts on both sides because of its 240° ~260°rotating device.
2.7 Its fast mobility and the capability of carrying piles and guard-rails as well as the necessary road signs with around 2 tons, make the truck-mounted pile driver the perfect solution for small jobs in different locations.
3. Main Technical Specifications
Type | 5052 | 5072 |
Type of Chassis | JX1050 | NKR77 |
Weight | 4075 KG | 4350 KG |
Max. Weight | 5500 KG | 6500 KG |
Person Capacity of Driving Cab | 5 Persons | 5 Persons |
Size (L×W×H) | 6090×1870×2560 mm | 6250×1880×2850 mm |
Max. Speed | 100 km/h | 100 km/h |
Rated Power | 85 KW | 96 KW |
Rotating Speed | 3600 r/min. | 2999 r/min. |
Weight of Hydraulic Hammer | 300 KG | 300 KG |
Dia. Of Drill Shank | 70 mm | 70 mm |
Hydraulic System Pressure | >16 MPa | >16 MPa |
Hydraulic System Flow | 50-60 L/min. | 55-65 L/min. |
Displacement | 60 ml/r | 70 ml/r |
Impulsive Pressure | 10-16 MPa | 10-16Mpa |
Impulsive Frequency | 10-16 Hz | 13-18 HZ |
Rotation Angle of Equipment | 240° | 240° |
Extracting Stroke | 1600 mm | 1600 mm |
Lateral Stroke | 350 mm | 350 mm |
Supporting Foot Stroke | 400 mm | 400 mm |
Pile Driving Force per Stroke of Hammer | Around 250 KN | Around 250 KN |
Pile Extracting Force | Around 250 KN | Around 250 KN |
Working height of hydraulic hammer | ≤3000 mm | ≤3000 mm |
Customize DFAC/FAW/SHACMAN/SINOTRUCK HOWO/JAC /ISUZU/JMC
Keystone Vessel Industrial Gas Cylinders| ISO Tank|Pressure Vessel| UN Portable Tanks- Dong Runze Special Vehicle
Keystone Vessel Manufacturing Co., Ltd
Customize FOTON Truck Mounted Guardrail Post Drivers And Pounder
with Drilling Device Screw Air Compressor And Hydraulic Pile HammerSpecial device :Highway Guardrail Drilling Machine vibro machine piling machine
Product model | DNJJ5121TQX6 |
Chassis model | FOTON BJ1128VGJEA-FK |
Curb weight | 10080kg |
Maximum total mass | 11995kg |
Rated power | 112kw |
Overall dimensions of vehicle | 7050×2360×3450mm |
System working pressure | 16 Mpa~20Mpa |
Hydraulic hammer model | YC230/YC260 |
Pile pulling force | 20t (with 78.4 KN/96. 5KN frequency vibration) |
Hydraulic hammer working height | 600-2700 mm |
For Driving, pulling and drilling the guardrail repair
Highway Fence Collision Barrier Repair Vehicle for Guardrail Maintenance
Highroad Guardrail Repair Vehicle
* Equipped with hydraulic pile and extraction device, the equipment can be used to pull out damaged post and replaced new one completely with hydraulic system.
* The vehicle can be rotated 260°and no need to be turned the direction during driving and extracting guardrail post work.
* The truck mounted pile driver become more effeciency and save labour cost thanks to its capacity of carrying more than 1T repair materials like guardrail post as well as the necessary road signs, make it best solution for small jobs in different location.
Highway Guardrail Construction Pile Driver
Highway Fence Collision Barrier Repair Vehicle for Guardrail Maintenance Highroad Guardrail Repair Vehicle
The power of the whole working device is taken through the chassis, which has low use cost and simple structure.
Adopting full hydraulic control technology, it is easy to operate and control and realize overload protection, with smooth work and high working efficiency.
The vehicle-mounted working platform can rotate 260 degrees, so the whole vehicle does not need to turn around during construction on the left and right sides.
1.1 Pile Driving Function: NJ Series Highway Guardrail Post Driver Truck is specially designed for road maintenance work for the road safety barriers and guard rail posts.
1.2 Pile Extracting Function: With the same equipment and hydraulic system for extracting poorly driven or incorrectly positioned posts or road maintenance work, it is a professional machine for extracting the posts out of any conditions of ground.
2. Features
2.1 NJ Series Highway Guardrail Post Driver Truck is composed of truck chassis, upper column, hydraulic system, hydraulic hammer, control system, post driving and extracting equipment. It has the characters of good mobility, low oil consumption, reliable brake system, quick and exact positioning, humanized design, easy operation, high efficiency.
2.2 The up and down, longitudinal and transverse shift, horizontal slide and rotation of the column are realized through hydraulic system.
2.3 The hydraulic hammer is installed onto the upper column and be downward and upward along the track of the column for pile driving and extracting working by hydraulic system. When extracting guard rail posts, the extractable supporting foot is hydraulically positioned on the ground, for enhanced stability and safe pile extraction.
2.4 The control system is equipped with multiple directional control valve and centralized hydraulic control rods which makes the operation simple and convenient.
2.5 It can install piles up to 3m (9.84’) in length, but on request the machine can be supplied with extension columns which can install piles up to 3.5m (11.48’) or even 4m (13.12’) long.
2.6 The equipment does not need to turn the direction during driving and extracting the guardrail posts on both sides because of its 240° ~260°rotating device.
2.7 Its fast mobility and the capability of carrying piles and guard-rails as well as the necessary road signs with around 2 tons, make the truck-mounted pile driver the perfect solution for small jobs in different locations.
3. Main Technical Specifications
Type | 5052 | 5072 |
Type of Chassis | JX1050 | NKR77 |
Weight | 4075 KG | 4350 KG |
Max. Weight | 5500 KG | 6500 KG |
Person Capacity of Driving Cab | 5 Persons | 5 Persons |
Size (L×W×H) | 6090×1870×2560 mm | 6250×1880×2850 mm |
Max. Speed | 100 km/h | 100 km/h |
Rated Power | 85 KW | 96 KW |
Rotating Speed | 3600 r/min. | 2999 r/min. |
Weight of Hydraulic Hammer | 300 KG | 300 KG |
Dia. Of Drill Shank | 70 mm | 70 mm |
Hydraulic System Pressure | >16 MPa | >16 MPa |
Hydraulic System Flow | 50-60 L/min. | 55-65 L/min. |
Displacement | 60 ml/r | 70 ml/r |
Impulsive Pressure | 10-16 MPa | 10-16Mpa |
Impulsive Frequency | 10-16 Hz | 13-18 HZ |
Rotation Angle of Equipment | 240° | 240° |
Extracting Stroke | 1600 mm | 1600 mm |
Lateral Stroke | 350 mm | 350 mm |
Supporting Foot Stroke | 400 mm | 400 mm |
Pile Driving Force per Stroke of Hammer | Around 250 KN | Around 250 KN |
Pile Extracting Force | Around 250 KN | Around 250 KN |
Working height of hydraulic hammer | ≤3000 mm | ≤3000 mm |
Customize DFAC/FAW/SHACMAN/SINOTRUCK HOWO/JAC /ISUZU/JMC
Keystone Vessel Industrial Gas Cylinders| ISO Tank|Pressure Vessel| UN Portable Tanks- Dong Runze Special Vehicle
Keystone Vessel Manufacturing Co., Ltd
20Units UN T21 Portable Tank Container 1880L Cylinder For TEAL Metal Alkyls UN3394 UN3399 to USA with 30pcs Spare PSV RELIEF VALVES SF/A412F-25P(3B) Manufacturer (SHENYANG XINGUANG VALVE ) KS1880-T21 Portable Tanks Max. gross mass : 4000 kg Tare : 1050 kg Payload : 2950 kg KSVU240016 -KSVU240035 Adr/Rid Organometallic Substance, Liquid, Water- Reactive C-480 Saddle Type Portable Tank, tank capacity 1880L
6 Sets Thermal Insulated LLDPE Lined Tanks 25KL for Sodium Hypochlorite Hydrochloric Acid To Saudi Arabia Lined PE Tanks 6604Gallon For Truck Trailer mounted FROM WUHAN PORT CHINA TO DAMMAM, SAUDI ARABIA BY SEA. + Port of loading : WUHAN PORT + Port of unloading :DAMMAM SAUDI ARABIA
2 Units T14 Hydrofluoric Hydrochloric Acid UN1789 UN1790 ISOTank Container Road Transport For ASCOR 20FT Tank Container (EMPTY AND NEW TANKS) FOR HYDROCHLORIC ACID UN1789 HCL HYDROFLUORIC ACID HF ACID UN1790 CARBON STEEL AND LINED WITH 16MM LLDPE DTAU2404015, DTAU2404020
5 Units Keystone Vessel T21 TEAL UN Portable Tank C480 Cylinder To SAUDI ARABIA KS1880-T21 Portable Tanks Max. gross mass : 4000 kg Tare : 1050 kg Payload : 2950 kg KSVU2400114 KSVU2400120 KSVU2400135 KSVU2400140 KSVU2400156
7 Units T14 Hydrofluoric Acid ISO Tank Container For Export to India 20FT TANK CONTAINER (EMPTY AND NEW TANKS) 20 FT TANK CONTAINER FOR HYDROFLUORIC ACID UN1790 HF ACID, CARON STEEL AND LINED WITH 16 MM LLDPE TANKS CAPACITY 21 KL COUNTRY OF ORIGIN : CHINA MARKING TANK NO.: DTAU2407014 DTAU2407020 DTAU2407035 DTAU2407040 DTAU2407056 DTAU2407061 DTAU2407077
2 UNITS 20FT Sodium Cyanide ISO Tank Container for West Africa Global Mine Operations 20FT Tank Container for Sodium Cyanide carbon steel and lined with 16mm LLDPE Specialized Tank Container, Sodium Cyanide Tank T6, Capacity 20000litre Hydrochloric acid with the concentration of 1789 (38%) 2X20TK DTAU2024611 DTAU2024627
PE Lined 20FT ISOTank Container For HCL Acid KOH 18KL To Vietnam (EMPTY AND NEW TANKS) TANK CAPACITY: 18M3 DTAU2407082
20Ft Stainless Steel Tank Container For Water Road Transport TO PORT OF SPAIN, TT 20FT Tank Container For store water capacity 25KL DTAU2407098
10PCS T21 TEAL PORTABLE TANK CONTAINER to BUSAN KOREA 10UNITS T21 PORTABLE TANK (EMPTY AND NEW TANKS WITH ADDITIONAL SPARE VALVES AND GASKETS) HS CODE:8609009000 KSVU2400011 KSVU2400027 KSVU2400032 KSVU2400048 KSVU2400053 KSVU2400069 KSVU2400074 KSVU2400080 KSVU2400095 KSVU2400109 10 UNITS 10700.000 KGS 33.9000 CBM
10 Units T14 ISOTank Container For Hydrofluoric Acid Export to India 20FT TANK CONTAINER (EMPTY AND NEW TANKS) 20 FT TANK CONTAINER FOR HYDROCHLORIC ACID UN1789 HCL, HYDROFLUORIC ACID UN1790 HF ACID CARON STEEL AND LINED WITH 16MM LLDPE TANKS CAPACITY 21 KL FOR ROAD INLAND MOVEMENTS
6 pcs Metal Alky T21 UN3394 UN3399 Portable Tank TEAL DEAC MAO to SGP Max. gross weight : 4000 kg Tare : 1050 kg Payload : 2950 kg Portable Tank instruction : T21 ADR/RID tank code : N/A Special provisions : TP2 TP7 TP36 TP41 Model : KS1880-T21 ISO size/type code : N/A Type : UN Portable Tank Dimensions : 1148(E.D) x2128 (L) x1388 (H) mm Nominal capacity : 1880 L Measured capacity : 1880 L at 20°C Maximum allowable working pressure : 14 bar Test pressure : 21 bar APPROVALS ADR/RID: F/9151/BV/23 IMDG: F/BV/23/194-T21 US DOT: UN Portable Tank TIR*: GB/C 26839 BV/2023 SUBSTANCES SUITABLE FOR TRANSPORT: In accordance with the requirements of the applicable regulations and the construction of the tank and its equipment. (Substances not compatible with the tank and/or its accessories are excluded for transport) UN3394 & UN3399
Customized Hydrochloric Acid HCL Tank Container Lined PE 24m3 for Trailer Mounted to Vietnam TANK CONTAINER VOLUME 24M3 STEEL SHEET 5MM, HEAD 6MM,Lined LLDPE 16mm for Hydrochloric Acid, Sulfuric Acid Transport 3 CHAMBERS HS CODE: 7309.00
6 units Metal Alky C480 Portable Tank TEAL DEAC Cylinder for Singapore 360 DEG. ROTATABLE TOP FLANGE VALVE (KV-MTFF DN15 PN 40), 360 DEG. ROTATABLE TOP FLANGE VALVE (KV-MTFE DN20 PN 40) K4430 Gaskets
6 Units 40KL 44KL 40FT ISO Steel Lined PE dilute sulfuric acid Tank Container to Kazakhstan40FT Tank Container PE Lined TankUsed to contain: HCl (max 35%), NaOH (max 50%), PAC (max 17%),H2SO4(max 94%) etc…Sulphuric Acid Tank Capacity: 40,000 Liters;44,000 LitersSteel sheet 6mm, head 6mmLiner thickness: 16mm PE01p
2 Sets HOWO Offroad AWD 6x6 Mixing And Charging ANFO Explosive Trucks Delivery