Availability: | |
---|---|
Quantity: | |
Dongfeng 4x2 DFL water jetting truck Dongfeng 4x2 DFL High Pressure water clean road Truck
Dongfeng 4x2 DFL water jetting truck Dongfeng 4x2 DFL High Pressure water clean road Truck
This high pressure Jetting water truck or jetting water vehicle can work by itself without the power from truck chasiss,it mainly help you to cleaning the sewer or drains under ground,it not only flushing the waste away,cutting the solid waste up to mince,but also help you to broken the solid waste and then help you to flusing the solid waste away,untill keep the sewer and drains clean.
1 TRUCK
Chassis model | DFLll60BX2 jetting water truck |
Deputy Engine Model | JX493G3 |
Spray rack cleaning width | 2.5-3.5m |
Spray rack declination | 30°Left and Right |
High pressure cleaning capacity | 25000m2/h |
Highest cleaning water pressure | 10MPa |
Clean water flow | 134L/min |
Spray water flow | 134L/min |
Low pressure sprinkler flow | 600~800L/min |
Low pressm'e flushing width | ≥24m |
Water gun range | 38m |
The jug actual volume | 7.52L |
Dimensions(L*W*H) | 9000*2495*3030mm |
4 Cleaning Water Tank
Volume 5000L
Material SS304
Thickness 4mm
Accessories 2 filling devices with 2"ball valves, couplings, hose pipe; 2" ventilation tube; 2 discharge pipe with 2" ball valves, couplings; Resin liqid lever detecter with insulating valve
Were Well One 450mm manhole with a ladder
Safety Protection Low liquid lever alarm
5 Water Supply Hose
Diameter 4" tube or PVC pipe
Pump water enter from two heads to insure the best water flowing
Equipments filters to pretect high pressure pump, the necessory drain
valve and ventilation valve
6 High Pressure Hose
Material PVC HP pipe ND=25mm (1")
Pressure 200 bar
7 High Pressure Hose Reel
Material 120mHP Hose ID=25mm (1"),
Device 120m HP hose ID=25mm(1"), with 1" BSP-F connected in two heads, then the hose can turn over
Fixed place On the rear cover
Working Place swivel in horizon between -100 degree to +100degree
Flexiable by hydraulic
Order adjusting the speed to flex
Device 1"high pressure shaft, 1"high pressure ball valve
Hose control Manual
Control necessory parts should be fixed on the hose reel
8 Small Hose Reel
Capacity 40m_high pressure hose, ID13(1/2")
Device each 40m_high pressure hose, ID13(1/2"), fix 1/2"on two heads
Assembly On side, the exact place is unsure
Device 1/2"high pressure shaft and 1/2"high pressure ball valve
9 Sub-Frame
Sub-Frame Made of high strengthen steel, and assembled according to
the truck construction.
Tank Support the flexible rosin supporting matches on the front of the tank
10 Hydraulic Device
Hydraulic pump assembly the necessary hydraulic pump
Fuel Tank big diameter fuel tank
Control We can assembly one working light on the truck's right
according to our customer's request
11 Additional Safety Devices
Emergency Stop Fixed on the main control panel
Working Light We can assembly one working light on the truck's right
according to our customer's request
12 Devices
Hose Box We fix the whole length steel hose box on the right side of the truck
Tool Box One lockable water proof stainless steel tool box
Traffic Rule All the devices are complied with the traffic rule
Mud guard PVC mud guard
13 Control
Control Provide all easy control system
Assembly All the controlling devices and where to be fixed are all
confirmed after we talked with our customers
Control All the control devices are in one water proof box.
Marks Make clear marks on the necessary places of the whole truck
1.The profile of the high pressure washing truck. | ||
Model | 4x2 | |
Dimensions(L*W*H) | mm | 7500x2400x3300 |
2. Engine | ||
Engine Model | ISDe185 40 (ISDe140 30)
| |
Fuel Type | Diesel | |
Engine Horsepower | Hp/Kw | 185/136 |
Exhaust | ml | 6700 |
Transmission | 6-speed with over drive | |
Electric system | 24 V | |
Manufacturer | Dongfeng(DFAC) Cummins | |
Emission Standard | EURO 4 | |
Max torque | 700 N.m | |
Maximum torque speed | 1400 | |
Rated speed | 2500RPM | |
Intake Forms | Intercooled diesel engine | |
3. Washing equipment specifications & functions | ||
Water tanker, Washing equipment | ||
Water tank capacity | Approx 5 T | |
Water tank dimensions | 2100x2100x1880 mm | |
Width of high pressure cleaning | 2.5~3.5 m | |
High pressure cleaning pressure | 10, 6, 19 optional | |
High pressure cleaning water flow | 152, 212,346 optional | |
Low pressure cleaning width | ≥20 m | |
Low pressure cleaning water flow | 500~800 L/min | |
Low pressure water gun range | 38 m |
chassis EURO4 list
Models | Wheelbase | Chassis Type | Parameter Configuration |
Dongfeng | 5000mm | DFL1120B13 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISB180-40 electronically controlled common rail engine, wheelbase 5000mm, Dongfeng six-speed gearbox DF6S900, 4.5T front axle, 9T single reduction axle, 250mm double (7 + 4) girders, 900R20 steel tire. Original ABS, tachograph, manual windows and doors, with air conditioning. |
DFL1160BX18 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Dongfeng EQH160-40 electronically controlled common rail engine, wheelbase 5000mm, Dongfeng six-speed gearbox DF6S900, 3.6T front axle, rear 8T single reduction axle, 250mm singlebeam, 900R20 steel tire. Original ABS, tachograph, manual windows and doors, with air conditioning. | ||
DFL1160BX5 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISB180-40 electronically controlled common rail engine, wheelbase 5000mm, Dongfeng six-speed gearbox DF6S900, 4.5T front axle, 9T single reduction axle, 250mm double (7 + 4) girders, 900R20 steel tire. Original ABS, tachograph, manual windows and doors, with air conditioning. | ||
Dongfeng | 4700mm | DFL1160BX18 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Dongfeng EQH160-40 electronically controlled common rail engine, wheelbase 4700mm, Dongfeng six-speed gearbox DF6S900, 3.6T front axle, rear 8T single reduction axle, 250mm singlebeam, 900R20 steel tire. Original ABS, tachograph, manual windows and doors, with air conditioning. |
Dongfeng | 3800mm 4700mm | DFL1120B3 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISDe180 40 electronically controlled common rail engine, wheelbase 3800mm, steel 160L fuel tank, Dongfeng six-speed gearbox DF6S750, 4.5T front axle, 9T single reduction axle , 250mm double (7 + 4) girders, 9.00-20 bias tires, original ABS, tachograph, manual windows and doors, with air conditioning. |
Dongfeng | 4200mm 4500mm | DFL1160BX4 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISB 180 -40 electronically controlled common rail engine, wheelbase 4200mm or 4500mm, Dongfeng six-speed gearbox DF6S900, 4.5T front axle, 9T single reduction rear axle, 250mm double (7 + 4) girders, 900R20 steel tire.Original ABS, tachograph, manual windows and doors, with air conditioning. |
Dongfeng | 3800mm | DFL1120B19 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISB180-40 electronically controlled common rail engine, wheelbase 3800mm or 4200mm, Dongfeng six-speed gearbox DF6S900, 3.6T front axle, rear 8T single reduction axle, 250mm single beam, 900R20 steel tire. Original ABS, tachograph, manual windows and doors, with air conditioning. |
Dongfeng small triaxial | A variety of optional | DFL1250BX5A | 6 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISB180-40 or ISB210-40 electronically controlled common rail engine, rear Datong seven-speed gearbox DC7J100TA, 5T front axle, 10T single reduction axle, 250mm double girder , 295 / 80R22.5 18PR steel tire. Original front disc brakes ABS speed, tachograph, manual windows and doors, with air conditioning. |
M:8615271357675
This high pressure Jetting water truck or jetting water vehicle can work by itself without the power from truck chasiss,it mainly help you to cleaning the sewer or drains under ground,it not only flushing the waste away,cutting the solid waste up to mince,but also help you to broken the solid waste and then help you to flusing the solid waste away,untill keep the sewer and drains clean.
1 TRUCK
Chassis model | DFLll60BX2 jetting water truck |
Deputy Engine Model | JX493G3 |
Spray rack cleaning width | 2.5-3.5m |
Spray rack declination | 30°Left and Right |
High pressure cleaning capacity | 25000m2/h |
Highest cleaning water pressure | 10MPa |
Clean water flow | 134L/min |
Spray water flow | 134L/min |
Low pressure sprinkler flow | 600~800L/min |
Low pressm'e flushing width | ≥24m |
Water gun range | 38m |
The jug actual volume | 7.52L |
Dimensions(L*W*H) | 9000*2495*3030mm |
4 Cleaning Water Tank
Volume 5000L
Material SS304
Thickness 4mm
Accessories 2 filling devices with 2"ball valves, couplings, hose pipe; 2" ventilation tube; 2 discharge pipe with 2" ball valves, couplings; Resin liqid lever detecter with insulating valve
Were Well One 450mm manhole with a ladder
Safety Protection Low liquid lever alarm
5 Water Supply Hose
Diameter 4" tube or PVC pipe
Pump water enter from two heads to insure the best water flowing
Equipments filters to pretect high pressure pump, the necessory drain
valve and ventilation valve
6 High Pressure Hose
Material PVC HP pipe ND=25mm (1")
Pressure 200 bar
7 High Pressure Hose Reel
Material 120mHP Hose ID=25mm (1"),
Device 120m HP hose ID=25mm(1"), with 1" BSP-F connected in two heads, then the hose can turn over
Fixed place On the rear cover
Working Place swivel in horizon between -100 degree to +100degree
Flexiable by hydraulic
Order adjusting the speed to flex
Device 1"high pressure shaft, 1"high pressure ball valve
Hose control Manual
Control necessory parts should be fixed on the hose reel
8 Small Hose Reel
Capacity 40m_high pressure hose, ID13(1/2")
Device each 40m_high pressure hose, ID13(1/2"), fix 1/2"on two heads
Assembly On side, the exact place is unsure
Device 1/2"high pressure shaft and 1/2"high pressure ball valve
9 Sub-Frame
Sub-Frame Made of high strengthen steel, and assembled according to
the truck construction.
Tank Support the flexible rosin supporting matches on the front of the tank
10 Hydraulic Device
Hydraulic pump assembly the necessary hydraulic pump
Fuel Tank big diameter fuel tank
Control We can assembly one working light on the truck's right
according to our customer's request
11 Additional Safety Devices
Emergency Stop Fixed on the main control panel
Working Light We can assembly one working light on the truck's right
according to our customer's request
12 Devices
Hose Box We fix the whole length steel hose box on the right side of the truck
Tool Box One lockable water proof stainless steel tool box
Traffic Rule All the devices are complied with the traffic rule
Mud guard PVC mud guard
13 Control
Control Provide all easy control system
Assembly All the controlling devices and where to be fixed are all
confirmed after we talked with our customers
Control All the control devices are in one water proof box.
Marks Make clear marks on the necessary places of the whole truck
1.The profile of the high pressure washing truck. | ||
Model | 4x2 | |
Dimensions(L*W*H) | mm | 7500x2400x3300 |
2. Engine | ||
Engine Model | ISDe185 40 (ISDe140 30)
| |
Fuel Type | Diesel | |
Engine Horsepower | Hp/Kw | 185/136 |
Exhaust | ml | 6700 |
Transmission | 6-speed with over drive | |
Electric system | 24 V | |
Manufacturer | Dongfeng(DFAC) Cummins | |
Emission Standard | EURO 4 | |
Max torque | 700 N.m | |
Maximum torque speed | 1400 | |
Rated speed | 2500RPM | |
Intake Forms | Intercooled diesel engine | |
3. Washing equipment specifications & functions | ||
Water tanker, Washing equipment | ||
Water tank capacity | Approx 5 T | |
Water tank dimensions | 2100x2100x1880 mm | |
Width of high pressure cleaning | 2.5~3.5 m | |
High pressure cleaning pressure | 10, 6, 19 optional | |
High pressure cleaning water flow | 152, 212,346 optional | |
Low pressure cleaning width | ≥20 m | |
Low pressure cleaning water flow | 500~800 L/min | |
Low pressure water gun range | 38 m |
chassis EURO4 list
Models | Wheelbase | Chassis Type | Parameter Configuration |
Dongfeng | 5000mm | DFL1120B13 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISB180-40 electronically controlled common rail engine, wheelbase 5000mm, Dongfeng six-speed gearbox DF6S900, 4.5T front axle, 9T single reduction axle, 250mm double (7 + 4) girders, 900R20 steel tire. Original ABS, tachograph, manual windows and doors, with air conditioning. |
DFL1160BX18 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Dongfeng EQH160-40 electronically controlled common rail engine, wheelbase 5000mm, Dongfeng six-speed gearbox DF6S900, 3.6T front axle, rear 8T single reduction axle, 250mm singlebeam, 900R20 steel tire. Original ABS, tachograph, manual windows and doors, with air conditioning. | ||
DFL1160BX5 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISB180-40 electronically controlled common rail engine, wheelbase 5000mm, Dongfeng six-speed gearbox DF6S900, 4.5T front axle, 9T single reduction axle, 250mm double (7 + 4) girders, 900R20 steel tire. Original ABS, tachograph, manual windows and doors, with air conditioning. | ||
Dongfeng | 4700mm | DFL1160BX18 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Dongfeng EQH160-40 electronically controlled common rail engine, wheelbase 4700mm, Dongfeng six-speed gearbox DF6S900, 3.6T front axle, rear 8T single reduction axle, 250mm singlebeam, 900R20 steel tire. Original ABS, tachograph, manual windows and doors, with air conditioning. |
Dongfeng | 3800mm 4700mm | DFL1120B3 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISDe180 40 electronically controlled common rail engine, wheelbase 3800mm, steel 160L fuel tank, Dongfeng six-speed gearbox DF6S750, 4.5T front axle, 9T single reduction axle , 250mm double (7 + 4) girders, 9.00-20 bias tires, original ABS, tachograph, manual windows and doors, with air conditioning. |
Dongfeng | 4200mm 4500mm | DFL1160BX4 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISB 180 -40 electronically controlled common rail engine, wheelbase 4200mm or 4500mm, Dongfeng six-speed gearbox DF6S900, 4.5T front axle, 9T single reduction rear axle, 250mm double (7 + 4) girders, 900R20 steel tire.Original ABS, tachograph, manual windows and doors, with air conditioning. |
Dongfeng | 3800mm | DFL1120B19 | 4 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISB180-40 electronically controlled common rail engine, wheelbase 3800mm or 4200mm, Dongfeng six-speed gearbox DF6S900, 3.6T front axle, rear 8T single reduction axle, 250mm single beam, 900R20 steel tire. Original ABS, tachograph, manual windows and doors, with air conditioning. |
Dongfeng small triaxial | A variety of optional | DFL1250BX5A | 6 × 2 drive, D530 flat head of a row of semi-flat top cab, Cummins ISB180-40 or ISB210-40 electronically controlled common rail engine, rear Datong seven-speed gearbox DC7J100TA, 5T front axle, 10T single reduction axle, 250mm double girder , 295 / 80R22.5 18PR steel tire. Original front disc brakes ABS speed, tachograph, manual windows and doors, with air conditioning. |
M:8615271357675
80Units Metal Alky C480 UN Portable Tank T21 TEAL Cylinders to USA 80Units UN T21 Portable Tank Container 1880L Cylinder For TEAL Metal Alkyls UN3394 UN3399 to USA Adr/Rid Organometallic Substance, Liquid, Water- Reactive C-430 Saddle Type Portable Tank , tank capacity 1630L C-480 Saddle Type Portable Tank, tank capacity 1880L C-1980 TEAL TMGa ,TEGa,TMIn, TMAl DEAC Metal Alky C-1980 T21 Metal Alky 7495L
6 units Metal Alky C480 Portable Tank TEAL DEAC Cylinder for Singapore 360 DEG. ROTATABLE TOP FLANGE VALVE (KV-MTFF DN15 PN 40), 360 DEG. ROTATABLE TOP FLANGE VALVE (KV-MTFE DN20 PN 40) K4430 Gaskets
6 Sets Polyethylene Lined Steel Tanks 6600Gallon For Hydrochloric Acid Storage Transport Hydrochloric Acid (HCl) to SAU Chemical Factory This the 4th LOT HCL ,NaCLO Tanks For this SAU Chemical Facttory . The 1 st Order date will go back to Date 13-1-2021. CAST IRON STORAGE TANK FOR CHEMICAL MATERIALS STORAGE TANK CAPACITY: 25M3 HS CODE:7309000000
3 Sets Lined PE Tanks 6604Gallon For Storage Transport Sodium Hypochlorite to Saudi Arabia FROM WUHAN PORT CHINA TO DAMMAM, SAUDI ARABIA BY SEA. + Port of loading : WUHAN PORT + Port of unloading :DAMMAM CAST IRON STORAGE TANK FOR CHEMICAL MATERIALS STORAGE TANK CAPACITY: 25M3 HS CODE:730900 10.2x2.1x2.5*3 160.65cbm 3X40HQ
4PCS Power Take-off PTO FOR JMC TRANSMISSION MODEL DN3-7003-EC 6MT1420 to URUGUAY Sdq51/65 (Gearbox Power Take off For ISUZU QINGLING Transmission DN3-70030-E0, 6MT1420 PTO Assembly) HWP-G32/65CHQ ,32/65 PQ1
12PCS PTO Wanliyang Transmission Power Take-off For WLY6T40 WLY6TS40 to Mexico 1 PC SDQ211/60LGQ1 PTO FOR 6DS60T-D TO SAUDI ARABIA
2 Units Righ Hand Drive Shacman F3000 Hydro Excavators Truck Combined Vacuum Sewer Jetting to Suva Port Fiji Shacman F3000 Hydro Excavators Truck Sewer Jet Suction Units (RHD 13500L Sewage+4000L Clean Water ) PTO, transmission shaft, vacuum pump, tanker, hydraulic system and jetting pipe system. Combined Sewer Suction & Jetting Unit SZW Aluminium Alloy Liquid Water Ring Compressor Vacuum Pump XW-2800 VAC Flow 2800 M³/h ,1648 Cfm 46.7M3/min 75KW
6 Sets Lined PE Tanks 6604Gallon For Storage Transport Hydrochloric Acid (HCl) to Saudi Arabia FROM WUHAN PORT CHINA TO DAMMAM, SAUDI ARABIA BY SEA. Port of loading : WUHAN PORT + Port of unloading :DAMMAM DONG RUN ZE CAST IRON STORAGE TANK FOR CHEMICAL MATERIALS STORAGE TANK CAPACITY: 25M3 HS CODE:7309000000 9.7x2.2x2.5*6
2 Sets Hydrochloric Acid HCL Tank Container Lined PE 24m3 Trailer Mounted to Vietnam
10 Units 22KL 20FT ISO Steel Lined PE Hydrochloric Acid HCL Tank Container to Vietnam 20FT Tank Container PE Lined Tank Used to contain: HCl (max 35%), NaOH (max 50%), PAC (max 17%),H2SO4(max 94%) etc… Tank Capacity: 21,000 Liters Steel sheet 6mm, head 6mm Liner thickness: 16mm PE 01pc butterfly valve CS/F46 and 01pc ball valve CS/F46 DRAU2209015 DRAU2209020 DRAU2209036 DRAU2209041 DRAU2209057 DRAU2209062 DRAU2209078 DRAU2209083 DRAU2209099 DRAU2209102
2 Sets Hydrochloric Acid Hydrofluoric Acid Road transport 20Ft Tank Container to Chennai India DTAU2200916 DTAU2200921
20Ft Nitric Acid (Hno3)Tank Container Pure 1060 Aluminum Tank DAF Huu Nghi ALUMINUM TANK FOR NITRIC ACID (HNO3 98%) ROAD TRANSPORT TANK THICKNESS 12MM CAPACITY18,000LITRES TANK SIZE Φ2000×5500 TANK SHELL MATERIAL AAA ALUMINUM / 12.00 MM HEAD PLATE MATERIAL AAA ALUMINUM / 14.00 MM WAVE PLATE AAA ALUMINUM / 8.00 MM CONTAINER FRAME 6058×2438×2591 LOCK BASE STEEL CASTING 45 #(180×165×120) CONTAINER COLUMN SQUARE TUBE Q235 / 4.00MM(120×120×4) CONTAINER CROSS FRAME SQUARE TUBE Q235 / 4.00MM(120×100×4) DATE OF MANUFACTURER 2022-09-06 MANHOLE COVER 316L STAINLESS STEEL,DN500, 0.4MPA, -40C~150C, MADE 2022-06 DISCHARGE VALVE Q41F-16C4/DN65,1.6MPA,<80C. MADE 2022-04 BUTTERFLY VALVE D71F-16RL,1.6MPA, MADE 2022-09 BREATHER VALVE 316L STAINLESS STEEL HXF-50,-20C~150C, MADE 2022-04
3 Sets Hydrochloric Acid HCL Tanker Lined PE Tank body for Cargo Truck 13m3 -16.5m3 to Vietnam TWO (2) UNITS OF TANK FOR HCL CARGO TRUCK 3 COMPARTMENTS TANK CAPACITY:16500 LITERS HS CODE: 7309.00 ONE (1) UNITS OF TANK FOR HCL CARGO TRUCK3 COMPARTMENTS TANK CAPACITY:13000LITERS HS CODE: 7309.00 THIRTY (30) UNITS OF LID WITH FLANGE #37CMTHREAD CAP PE LID VORTEX SCREW STRUCTURE HS CODE: 3923.50 PACKING: TOTAL 9 PACKAGES(3 NUDE PACKAGES +6BOXES) ONLY
20Sets Power take-offs (PTOs) WLY5G32 ,6DS60T-D ,8JS85 ,DC7J120T to Ecuador C&F GUAYAQUIL, EC LCL. CFS-CFS Part No. Description Quantity SDQ 24/63-B LGQ1 PTO For WLY5G32 5.595 7 SDQ34/29LGQ1 " PTO FOR 8JS85E GEAR SPLINE" 3 SDQ34/29PQ1 " PTO FOR 8JS85E GEAR FLANGE" 2 SDQ211-60LGQ1 "PTO FOR 6DS60T-D GEAR SPLINE" 3 SDQ211-60PQ1 "PTO FOR 6DS60T-D GEAR SPLINE" 2 DC7J120T "PTO for DC7J120T (DC7J120TC )1a10.307" 3
6000Liters Lined PE Mobile Hydrochloric Acid (HCl) Tank For Truck Lorry Ready for Export STEEL SHELL 5MM, HEAD 6MM TANK SIZE :3800*1900*1230MM, OVER ALL SIZE3800*1900*1800MM DISCHARGE VALVE ND80/DN 65