 |
- 20FT Portable Tank UN1744
ISO 20ft Bromine T22 UN Portable Tank Container 8.32m3 Lead Lining
6.67Bar 20K2 ISOTank UN1744 IMDG/ADR/RID
TC IMPACT APPROVED Bromine Storage Tanks
ISO's ranging in capacity from 6870 Liter to 8230 Liter ,9130 Liter Capacities.
lead lined shipping containers have a homogeneous chemical lead lining installed as per all regulatory bodies requirements.
The general design consists of a 20' ISO frame and a tank made of carbon steel with internal lead-lining. The tanks are equipped with a manhole of 20" nominal size. The manhole is located on the top of the tank approx. in the centre of the shell. A working platform is installed in the area of the manhole. The platform is located all around the manhole. Mounting ladders are installed on both longitudinal sides. Filling, discharge and safety devices are installed on top of the manhole covered and protected by dome cover.
The frame dimensions: 20' x 8' x 8' = 6058 x 2438 x 2438 mm. The frame is equipped with corner castings according to ISO regulations. Further handling devices are not installed.
Handling of Containers Attention:
The ISO tank containers of type 20T6, IMDG type T22 are designed for the transport of liquid Bromine.
The approved quality of Bromine is:
• Liquid Bromine Br2,
• Free from acids
• Recommended water content 0.005% or less
• Maximum allowable water content 0.1%
Attention: Water content higher than 0.005% leads to increased corrosion and requires frequent internal inspection.
All relevant national and international regulations for the handling and transport of dangerous goods in general as well as special regulations concerning Bromine have to be observed at any time. Endanger of persons and pollution of environment has to be excluded. For the handling of the tank containers procedures as following are permitted. Lifting / transfer • by spreader fixed to all upper corner castings. This is the preferred method. • by using of traverses and ropes of sufficient strength. The ropes have to be equipped with suitable and approved arresting devices which have to be fixed to the lower corner castings.
Attention: The handling of the containers by using fork lift or similar device is not allowed.
Transportation
• by truck or freight train using vehicles equipped with approved twist locks which have to be in accordance with the relevant ISO -regulations.
• by vessels observing the regulations of stowage, separation and lashing. Special container vessels should be preferred. Attention: In case of transportation by truck or train total weight and dimensions have to be checked and compared with perhaps existing limitations. Unloading Of Bromine from ISO Containers (Three Valve) The ISO containers used for transportation of Bromine are of lead lined. So care shall be taken to ensure that no moisture / atmospheric air enters into the container.
We recommend Teflon lined rubber hoses for the unloading of the trucks.
DTA T22 Tank Container | • Liquid Bromine Br2, • Free from acids • Recommended water content 0.005% or less • Maximum allowable water content 0.1% |
Name | 20ft tank container |
Model | T22/ DTAU |
Medium | Liquid bromine UN1744 |
Volume L | 8320 |
External Dimension Mm | 6058*2438*2438 20' x 8' x 8' |
Tank Size Mm | φ1500*5600 |
Design Pressure Bar | 6.67 |
Test Pressure Bar | 10 |
Design Temperature Range | -40℃~65℃ |
Can Body Material | SA516M Gr485 |
Nominal Shell Thickness Mm | 10.13,12 |
Seal Thickness Mm | 10.13,12 |
Anti Corrosion In Tank | LING LEAD 3-6mm |
Net Weight Of Tank Kg | ≈7800 |
Operation Quality Kg | 36000 |
Max Play Loading Kg | 28200 |
Loading And Unloading Type | Top |
Accessories Configuration | Safety valve+bursting disc * 1, DN65 Gas phase valve * 2, DN40 Liquid phase valve (including siphon and liquid trap) * 1, DN40 Manhole * 1, DN500 |
Design/Manufacturing Standards | IMDG CODE 2016,ADR/RID,49CFR,TIR, |
Third Party Inspection | BV/ ASME /TS |
Attention: | The handling of the containers by using fork lift or similar device is not allowed. Transportation • by truck or freight train using vehicles equipped with approved twist locks which have to be in accordance with the relevant ISO -regulations. • by vessels observing the regulations of stowage, separation and lashing. Special container vessels should be preferred. Attention: In case of transportation by truck or train total weight and dimensions have to be checked and compared with perhaps existing limitations. Unloading Of Bromine from ISO Containers (Three Valve) The ISO containers used for transportation of Bromine are of lead lined. So care shall be taken to ensure that no moisture / atmospheric air enters into the container. Dong Run ZE recommend Teflon lined rubber hoses for the unloading of the trucks. |
ISO 20ft Bromine T22 UN Portable Tank Container 8.32m3 Lead Lining
6.67Bar 20K2 ISOTank UN1744 IMDG/ADR/RID
TC IMPACT APPROVED Bromine Storage Tanks
ISO's ranging in capacity from 6870 Liter to 8230 Liter ,9130 Liter Capacities.
lead lined shipping containers have a homogeneous chemical lead lining installed as per all regulatory bodies requirements.
The general design consists of a 20' ISO frame and a tank made of carbon steel with internal lead-lining. The tanks are equipped with a manhole of 20" nominal size. The manhole is located on the top of the tank approx. in the centre of the shell. A working platform is installed in the area of the manhole. The platform is located all around the manhole. Mounting ladders are installed on both longitudinal sides. Filling, discharge and safety devices are installed on top of the manhole covered and protected by dome cover.
The frame dimensions: 20' x 8' x 8' = 6058 x 2438 x 2438 mm. The frame is equipped with corner castings according to ISO regulations. Further handling devices are not installed.
Handling of Containers Attention:
The ISO tank containers of type 20T6, IMDG type T22 are designed for the transport of liquid Bromine.
The approved quality of Bromine is:
• Liquid Bromine Br2,
• Free from acids
• Recommended water content 0.005% or less
• Maximum allowable water content 0.1%
Attention: Water content higher than 0.005% leads to increased corrosion and requires frequent internal inspection.
All relevant national and international regulations for the handling and transport of dangerous goods in general as well as special regulations concerning Bromine have to be observed at any time. Endanger of persons and pollution of environment has to be excluded. For the handling of the tank containers procedures as following are permitted. Lifting / transfer • by spreader fixed to all upper corner castings. This is the preferred method. • by using of traverses and ropes of sufficient strength. The ropes have to be equipped with suitable and approved arresting devices which have to be fixed to the lower corner castings.
Attention: The handling of the containers by using fork lift or similar device is not allowed.
Transportation
• by truck or freight train using vehicles equipped with approved twist locks which have to be in accordance with the relevant ISO -regulations.
• by vessels observing the regulations of stowage, separation and lashing. Special container vessels should be preferred. Attention: In case of transportation by truck or train total weight and dimensions have to be checked and compared with perhaps existing limitations. Unloading Of Bromine from ISO Containers (Three Valve) The ISO containers used for transportation of Bromine are of lead lined. So care shall be taken to ensure that no moisture / atmospheric air enters into the container.
We recommend Teflon lined rubber hoses for the unloading of the trucks.
DTA T22 Tank Container | • Liquid Bromine Br2, • Free from acids • Recommended water content 0.005% or less • Maximum allowable water content 0.1% |
Name | 20ft tank container |
Model | T22/ DTAU |
Medium | Liquid bromine UN1744 |
Volume L | 8320 |
External Dimension Mm | 6058*2438*2438 20' x 8' x 8' |
Tank Size Mm | φ1500*5600 |
Design Pressure Bar | 6.67 |
Test Pressure Bar | 10 |
Design Temperature Range | -40℃~65℃ |
Can Body Material | SA516M Gr485 |
Nominal Shell Thickness Mm | 10.13,12 |
Seal Thickness Mm | 10.13,12 |
Anti Corrosion In Tank | LING LEAD 3-6mm |
Net Weight Of Tank Kg | ≈7800 |
Operation Quality Kg | 36000 |
Max Play Loading Kg | 28200 |
Loading And Unloading Type | Top |
Accessories Configuration | Safety valve+bursting disc * 1, DN65 Gas phase valve * 2, DN40 Liquid phase valve (including siphon and liquid trap) * 1, DN40 Manhole * 1, DN500 |
Design/Manufacturing Standards | IMDG CODE 2016,ADR/RID,49CFR,TIR, |
Third Party Inspection | BV/ ASME /TS |
Attention: | The handling of the containers by using fork lift or similar device is not allowed. Transportation • by truck or freight train using vehicles equipped with approved twist locks which have to be in accordance with the relevant ISO -regulations. • by vessels observing the regulations of stowage, separation and lashing. Special container vessels should be preferred. Attention: In case of transportation by truck or train total weight and dimensions have to be checked and compared with perhaps existing limitations. Unloading Of Bromine from ISO Containers (Three Valve) The ISO containers used for transportation of Bromine are of lead lined. So care shall be taken to ensure that no moisture / atmospheric air enters into the container. Dong Run ZE recommend Teflon lined rubber hoses for the unloading of the trucks. |
