Power Take-off for WLY WLY8GS36(PTOs)
Product Description
Power Take-off for WLY WLY8GS36(PTOs)
WLY WLY8GS36-01-160 Gearbox
Model: WLY8GS36-01-160
8GS36: 8-speed manual transmission with a rated input torque of 360Nm, designed for light-duty trucks and special vehicles.01-160: Specific configuration version for vehicle OEMs.Manufacturer: Zhejiang Wanliyang (WLY), a leading domestic manufacturer of commercial vehicle transmissions in China.
⚙️ Core Performance Parameters
Overall Gear Ratio Range: 9.785 ~ 0.728
1st gear ratio: 9.785 (high torque for heavy-load starting and climbing)
8th gear ratio: 0.728 (overdrive for fuel-efficient high-speed cruising)
Recommended Gear Oil: 75W/90 GL-4
GL-4 is mandatory (GL-5 is prohibited, as its extreme pressure additives will damage the synchronizers)
75W-90 viscosity ensures excellent low-temperature fluidity and high-temperature lubrication.
Oil Capacity: 3.9 Liters
Standard filling volume for maintenance, must be strictly followed to avoid overfilling or underfilling.
Application Scenarios
4.2m light-duty trucks, 3.8m dump trucks
Special vehicles such as concrete mixer trucks, wrecker trucks, and pump trucks
Vehicles with 130-170HP diesel engines, for urban distribution, green logistics, and engineering transportation.
3. Key Maintenance Notes (English)
Oil Specification Compliance: Only use 75W/90 GL-4 gear oil. Do NOT substitute with GL-5 oil, which will cause synchronizer corrosion and premature failure.
Oil Level Control: Fill exactly 3.9L of gear oil during maintenance, and verify the level via the oil level check plug.
P.T.O Compatibility: The unit supports Power Take-off (P.T.O) installation for special vehicle applications, with a dedicated P.T.O ratio interface on the nameplate.
Maintenance Interval: Replace gear oil every 20,000-30,000 km, and shorten the interval for heavy-load or mountainous driving conditions.
Truck PTO Power take off Accessories Parts
WLY 6‑Speed Transmission Series
(All models are 6‑speed manual; price available upon inquiry)WLY6TS55(6.16), WLY6G40(5.32), WLY653H(6.52), WLY646, WLY6G40(6.14), WLY6TS40(6.14), WLY6G55, WLY6T150, WLY6TS55(6.32), 6TS55B, WLY653, WLY653H(7.64), WLY6T120, WLY6G120, WLY6T46, WLY6G70, WLY6TS40(5.32), WLY6T90, WLY670H, WLY670, WLY6TS55(5.52), WLY6H75M(7.35), WLY6GS40, WLY6G45, WLY6G60, WLY6AG150, WLY6G100, WLY6T85, WLY6T100, WLY651, WLY6T75M, WLY6T53, WLY6V40, WLY6AG70, WLY6G90, WLY6H75M(6.50), WLY6AG40
PTO matching models available
WanLiYang series power takeoff (WLY)
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-WL24/37 | 1.176 | 250 | 10H30 PTO | Internal spline / flange | Pneumatics |
2 | SDQ-WL24/38 | 1.077 | 300 | 6G55 PTO | Internal spline / flange | Pneumatics |
3 | SDQ-WL24/40 | 1.333 | 300 | 6G40A PTO | Internal spline / flange | Pneumatics |
4 | SDQ-WL31/39 | 1.1 | 300 | 6G40A PTO | Internal spline / flange | Pneumatics |
5 | SDQ-WL24/43 | 1.087 | 300 | 5G40 PTO | Internal spline / flange | Pneumatic / manual / vacuum |
6 | SDQ-WL24/44 | 1.043 | 300 | 6G40B PTO | Internal spline / flange | Pneumatics |
7 | SDQ-WL24/59 | 1.094 | 300 | 6G120/6G70 PTO | Internal spline / flange | Pneumatics |
8 | SDQ-WL24/60 | 1.3 | 300 | 6TS40 PTO | Internal spline / flange | Pneumatics |
9 | SDQ-WL24/63 | 1.39 | 180 | 5TS32 PTO | Internal spline / flange | Pneumatic / manual |
10 | SDQ-WL 24/63-B | 1.39 | 180 | Internal spline / flange | Pneumatic / manual | |
11 | SDQ-WL 24/66 | 1.359 | 180 | 5TS32-C PTO | Internal spline / flange | Pneumatic / manual |
12 | SDQ-WL 24/66-B | 1.146 | 180 | 5G32B/5G32C PTO | Internal spline / flange | Pneumatic / manual |
13 | SDQ-WL 24/67 SDQ-WL 25/67 | 1.147 | 300 | 6T120/6S46/6S51 PTO | Internal spline / flange | Pneumatics |
14 | SDQ-WL 24/70 | 1.15 | 200 | 6S46B (2015-4-25 stop produce) | Internal spline / flange | Pneumatic / manual |
15 | SDQ-WL 24/71 SDQ-WL 25/71 | 1.11 | 300 | 6S51B/6S46B PTO | Internal spline / flange | Pneumatic / manual |
16 | SDQ-WL 24/72 | 1.133 | 300 | 6TS55E/6TS60 PTO | Internal spline / flange | Pneumatic / manual |
17 | SDQ-WL23/63 | 1.35 | 350 | 10H46 PTO | Internal spline / flange | Pneumatics |
18 | SDQ-WL23/71 | 1.15 | 400 | 7TS60 PTO | Internal spline / flange | Pneumatics |
19 | SDQ-WL24/75 | 1 | 400 | 7TS60B PTO | Internal spline / flange | Pneumatics |
20 | SDQ-WL25/70 | 1.244 | 400 | 7TS60C PTO | Internal flange / spline | Pneumatics |
21 | SDQ-WL24/73 | 1.07 | 400 | 7TS60D PTO | Internal spline / flange | Pneumatics |
22 | SDQ-WL25/33 | 1.228 | 350 | 10h46 (right) PTO | Internal spline / flange | Pneumatics |
23 | SDQ-WL27/70 | 1.08 | 150 | 5TS40 PTO | Internal spline / flange | Pneumatics |
24 | SDQ-WL31/46 | 1.2 | 180 | 5TS40 PTO | Internal spline / flange | Pneumatics |
25 | SDQ-WL211/100 | 1 | 1000 | 9G90 PTO | Internal spline / flange | Pneumatics |
WLY 5TS40 Transmission Power Take-Off PTO SDQ-WL31/46LGQ1 for Dongfeng Truck