WLY Power Take-off PTO FOR 5G32A-5.595 SPLINE MECHENICAL 5G32Q-0000
Product Description
WLY Power Take-off PTO FOR 5G32A-5.595 SPLINE MECHENICAL 5G32Q-0000
manual cable control
Original Model: 5G32Q-0000 ,SDQ-WL24/63-B
Replacement Model: HWP-W38/64CHQ, FZ38/63QH
Compatible Transmission: WLY 5G32 A Series Manual Transmission (0.794-5.595)
Control Mode: Pneumatic (Air Pressure ≥ 0.6 MPa)
Output Type: Internal Spline / Flange (ISO Standard)
Application Vehicles:
Function & Application
Appearance & Installation
Installation Position: Side PTO port of the transmission
Connection Mode: MECHENICAL Cable or Gear meshing + pneumatically controlled clutch
Common Matching: Matched with hydraulic gear pumps, used for garbage truck compaction mechanisms, wrecker tow arms, dump truck lifting systems, etc.
Alternative Models in the Same Series
Opiotnal Power Output Spline
Model list of power take-off
FAW Jiefang power takeoff
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-YQ12/68 | 1.24 | 250 | CA6T-123/TS6-53 | Internal spline / flange | Pneumatics |
2 | SDQ-YQ12/72 | 1.199 | 250 | CA6T-123/TS6-53 | Internal spline / flange | Pneumatics |
3 | SDQ-YQ13/70 | 1.08 | 300 | CATS6-75A/1700940-680 | Internal spline / flange | Pneumatics |
4 | SDQ-YQ15/75 | 1.006 | 350 | CATS6-75(74)、 TZ1700940H4G、CA6T-138 | Internal spline / flange | Pneumatics |
5 | SDQ-YQ15/52 | 1.179 | 400 | CA6T138 | Internal spline / flange | Pneumatic (dynamic clutch) |
Dongfeng series power take off (DFAC)
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-DF21/33 | 1.044 | 250 | 17C-00030、17G0A4-08、 | Internal spline / flange | Pneumatics |
2 | SDQ-DF22/47 | 1.2 | 600 | Dt0690 overdrive | Internal spline / flange | Pneumatics |
3 | SDQ-DF22/47-A | 1.03 | 600 | Dt0690 overdrive | Internal spline / flange | Pneumatics |
4 | SDQ-DF24/42 | 1.2 | 600 | DF6S900 | Internal spline / flange | Pneumatics |
5 | SDQ-DF24/42-B | 1.03 | 450 | DF6S900 | Internal spline / flange | Pneumatics |
6 | SDQ-DF24/45 | 1.2 | 600 | DF6S900 | Internal spline / flange | Pneumatics |
7 | SDQ-DF24/45-B | 1.03 | 450 | DF6S900 | Internal spline / flange | Pneumatics |
8 | SDQ-DF24/65 | 1.06 | 400 | DF6S-750 | Internal spline / flange | Pneumatics |
9 | SDQ-DF24/64 | 1.06 | 400 | DF6S750/DF6S650 | Internal spline / flange | Pneumatics |
10 |
SDQ-DF24/69 |
1.211 |
350 | 17K1/17KT6K-00030、 17K17-00030/17G1A7-15、 17K23-00030/17G0A7-15 | Internal spline / flange | Pneumatics |
11 |
SDQ-DF25/63 |
1.23 |
350 | 17G1A7-41/17F40(44/62) /17g0a7-21 (41) / jiangft 650H | Internal spline / flange | Pneumatics |
12 |
SDQ-DF26/31 |
1.45 |
350 | DC6J70T/17G0A3-08(09/15/ 25/96)/Zqc6t-75 / 750 | Internal spline / flange | Pneumatics |
13 |
SDQ-DF27/21 |
1.845 |
350 | DC85JTZ/17G0Z56-010/17G 0A3-33(35/36)/17G0010-N9 002/14G0A3-32(34) /DC6J85TZ |
Internal spline / flange |
Pneumatics |
14 |
SDQ-DF27/53 |
1.35 |
350 | 17G0A9-Z67D/DC7J100TB/1 7G0A9-45(-24-00030) | Internal spline / flange | Pneumatics |
15 | SDQ-DF27/55 | 1.216 | 300 | 17g0a3-32 (33 / 34 / 35 / 36) straight Connecting gear / dc6j85tz (direct gear) | Internal spline / flange | Pneumatics |
16 | SDQ-DF27/65 | 1.07 | 350 | DC7J100TC、17G0A9-Z66D | Internal spline / flange | Pneumatics |
17 | SDQ-DF27/66 | 1.26 | 350 | Dc6j85tz (overdrive) /17G0A3-54/1700010-A9000 | Internal spline / flange | Pneumatics |
18 | SDQ-DF28/55 | 1.3 | 400 | 17GOA3-38/17N29-00030 | Internal spline / flange | Pneumatics |
19 | SDQ-DF28/65 | 1.55 | 350 | Dc7j120tb (overdrive) /01-00030 | Internal spline / flange | Pneumatics |
20 |
SDQ-DF28/72 |
1.84 |
350 | Dc7j120tc (direct gear) /01-00030 | Internal spline / flange | Pneumatics |
Jac Xingrui series power take off (JAC)
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-XR50/35 | 1 | 300 | LC6T55 WLY6TS55 | Internal spline / flange | Pneumatics |
2 | SDQ-XR50/45 | 1.1 | 280 | LC6T46/LC6T450 | Internal spline / flange | Pneumatics |
3 | SDQ-XR50/60 | 1.1435 | 300 | LC6T540 | Internal spline / flange | Pneumatics |
4 | SDQ-XR50/63 | 1.11 | 300 | LC6T540/15CO7027 | Internal spline / flange | Pneumatics |
5 | SDQ-XR50/65 | 1.6433 | 250 | ML642A-A9 | Internal spline / flange | Pneumatics |
6 | SDQ-XR50/67 | 1.1541 | 250 | ML532A | Internal spline / flange | Pneumatic / manual |
7 | SDQ-XR50/69 | 1.1 | 280 | LC6T46/LC6T450 | Internal spline / flange | Pneumatics |
8 | SDQ-XR50/71 | 1.17 | 200 | LC5T97/LC5T30 | Internal spline / flange | Pneumatics |
9 | SDQ-XR50/74 | 1.03 | 200 | LC5T35/LC5T40 | Internal spline / flange | Pneumatics |
10 | SDQ-XR23/55 | 1.12 | 300 | LC6T450M1 | Internal spline / flange | Pneumatic / manual |
11 | SDQ-XR37/77 | 1.55 | 200 | ML532C | Internal spline / flange | Pneumatic / manual |
Qingling Isuzu series power take off (Isuzu)
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-WS51/62 | 1.3 | 150 | Msb-5m / starray lc5t88 | Internal spline / flange | Pneumatics |
2 | SDQ-WS38/63 | 1 | 150 | Msb-5m / starray lc5t88 | Internal spline / flange | Pneumatic / manual |
3 | SDQ-WS32/64 | 1.095 | 300 | MYY-6S | Internal spline / flange | Pneumatic / manual |
4 |
SDQ-WS35/74 |
1.63 |
180 | MSB-5M/MSB-5S/MSB-5SM/LC5T88
LC5T25/LC5T255M3/LC5T28 |
Internal spline / flange | Pneumatic / manual vacuum |
5 | SDQ-WS52/77 | 1.18 | 250 | MLD-6Q/MLD6A | Internal spline / flange | Pneumatics |
JMC series power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-GT32/65 | 1.26 | 250 | 6MT1420/DN3-70030-E0/KN3 | Internal spline / flange | Pneumatic / manual |
2 | SDQ-GT51/67 | 1.2 | 200 | JC5T28/5T26.5/MTI280JD | Internal spline / flange | Pneumatic / manual |
3 | SDQ-GT32/65-A | 1.315 | 250 | 6MT1420/DN3-70030-E0/KN3 | Internal spline / flange | Pneumatic / manual |
4 | SDQ-GT32/65-B | 1.09 | 250 | 6MT1420/DN3-70030-E0/KN3 | Internal spline / flange | Pneumatic / manual |
5 | SDQ-GT32/65-C | 1.26 | 250 | 6MT1420/DN3-70030-E0/KN3 | Internal spline / flange | Pneumatic / manual |
ZF series power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-ZF51/38 | 1.077 | 300 | ZF6S500/ZF6S600/ZF6S558 ZF6S508/ZF6S458 | Internal spline / flange | Pneumatics |
2 | SDQ-ZF51/44 | 1 | 250 | ZF5S400 | Internal spline / flange | Manual |
3 | SDQ-ZF48/39 | 1.063 | 250 | ZF5S408/ZF5S328 | Internal spline / flange | Pneumatics |
4 | SDQ-ZF211/65 | 0.772 | 650 | TraXon12 | Internal spline / flange | Pneumatics |
Fast power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-FS212/70 | 0.94 | 600 | 12JSD160TA | Internal spline / flange | Pneumatics |
2 | SDQ-FS212/70-A | 0.78 | 600 | 12JSD160TA | Internal spline / flange | Pneumatics |
3 | SDQ-FS19/31 (QD40A) | 1.09 | 400 | 8JS75 | Internal spline | Pneumatics |
4 | SDQ-FS24/37 ( QCZ70A) | 0.93 | 600 | 6J80T | Internal spline / flange | Pneumatics |
5 | SDQ-FS211/60 | 1.1 | 350 | 6DS40TB-D/6DS60TB-D 6DS60TA-D | Internal spline / flange | Pneumatics |
6 |
SDQ-FS211/70 |
0.94 |
600 | Fuller / fast / rt-11509c 8JS100S/17G0A9-22 | Internal spline / flange | Pneumatics |
7 |
SDQ-FS211/70-A |
0.78 |
600 | Fuller / fast / rt-11509c 8JS100S/17G0A9-22 | Internal spline / flange | Pneumatics |
8 | SDQ-FS34/29 QD40J
| 400 | 8JS75 8js75tc
| Internal spline / flange | Pneumatics |
WanLiYang series power take off (wly)
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-WL24/37 | 1.176 | 250 | 10H30 | Internal spline / flange | Pneumatics |
2 | SDQ-WL24/38 | 1.077 | 300 | 6G55 | Internal spline / flange | Pneumatics |
3 | SDQ-WL24/40 | 1.333 | 300 | 6G40A | Internal spline / flange | Pneumatics |
4 | SDQ-WL31/39 | 1.1 | 300 | 6G40A | Internal spline / flange | Pneumatics |
5 | SDQ-WL24/43 | 1.087 | 300 | 5G40 | Internal spline / flange | Pneumatic / manual / vacuum |
6 | SDQ-WL24/44 | 1.043 | 300 | 6G40B | Internal spline / flange | Pneumatics |
7 | SDQ-WL24/59 | 1.094 | 300 | 6G120/6G70 | Internal spline / flange | Pneumatics |
8 | SDQ-WL24/60 | 1.3 | 300 | 6TS40 | Internal spline / flange | Pneumatics |
9 | SDQ-WL24/63 | 1.39 | 180 | 5TS32 | Internal spline / flange | Pneumatic / manual |
10 | SDQ-WL 24/63-B | 1.39 | 180 | 5G32A | Internal spline / flange | Pneumatic / manual |
11 | SDQ-WL 24/66 | 1.359 | 180 | 5TS32-C | Internal spline / flange | Pneumatic / manual |
12 | SDQ-WL 24/66-B | 1.146 | 180 | 5G32B/5G32C | Internal spline / flange | Pneumatic / manual |
13 | SDQ-WL 24/67 SDQ-WL 25/67 | 1.147 | 300 | 6T120/6S46/6S51 | Internal spline / flange | Pneumatics |
14 | SDQ-WL 24/70 | 1.15 | 200 | 6S46B (2015-4-25) | Internal spline / flange | Pneumatic / manual |
15 | SDQ-WL 24/71 SDQ-WL 25/71 | 1.11 | 300 | 6S51B/6S46B | Internal spline / flange | Pneumatic / manual |
16 | SDQ-WL 24/72 | 1.133 | 300 | 6TS55E/6TS60 | Internal spline / flange | Pneumatic / manual |
17 | SDQ-WL23/63 | 1.35 | 350 | 10H46 | Internal spline / flange | Pneumatics |
18 | SDQ-WL23/71 | 1.15 | 400 | 7TS60 | Internal spline / flange | Pneumatics |
19 | SDQ-WL24/75 | 1 | 400 | 7TS60B | Internal spline / flange | Pneumatics |
20 | SDQ-WL25/70 | 1.244 | 400 | 7TS60C | Internal flange / spline | Pneumatics |
21 | SDQ-WL24/73 | 1.07 | 400 | 7TS60D | Internal spline / flange | Pneumatics |
22 | SDQ-WL25/33 | 1.228 | 350 | 10h46 (right) | Internal spline / flange | Pneumatics |
23 | SDQ-WL27/70 | 1.08 | 150 | 5TS40 | Internal spline / flange | Pneumatics |
24 | SDQ-WL31/46 | 1.2 | 180 | 5TS40 | Internal spline / flange | Pneumatics |
25 | SDQ-WL211/100 | 1 | 1000 | 9G90 | Internal spline / flange | Pneumatics |
Heavy duty Sinotruck power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-ZD27/61 | 1.1 | 600 | DC7J120T | Flange flange | Pneumatic (dynamic clutch) |
2 | HW50 | 0.739 | 500 | HW14710/HW18710 HW15710/HW19710 | Internal flange / spline | Pneumatics |
3 | HW70 | 0.793 | 700 | HW18709/HW18710 | Internal spline / flange | |
4 | HW80Q-F301 | 800 | HW90510C1 | Flange flange | Pneumatics | |
5 | HW140Q-F301 | 0.84 | 1400 | HW12706 | Flange flange | Pneumatics |
6 | HW140Q-F302 | 0.84 | 1400 | HW12706 | Flange flange | Pneumatics |
7 | HW140Q-F303 | 0.84 | 1400 | HW12706 | Flange flange | Pneumatics |
8 | HW140Q-F305 | 0.84 | 1400 | HW12706 | Flange flange | Pneumatics |
9 | HW60Q-F300 | 0.686 | 600 | HW12706 | Flange flange | Pneumatics |
Other series of power take-off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-HL211/65 | 0.772 | 650 | Soda gearbox 12sob1500 | Internal spline / flange | Pneumatics |
2 | SDQ-HL211/100 | 1 | 1000 | Soda gearbox 12sob1500 | Internal spline / flange | Pneumatics |
3 | SDQ-NQ42/26 | 1.15 | 150 | NAC 2830.5 | Internal spline / flange | Pneumatics |
4 | SDQ-NQ42/27 | 1.15 | 150 | NAC 2830.5 | Internal spline / flange | Pneumatics |
5 | SDQ-SQ42/77 | 1.13 | 300 | SAIC sc50m6d | Internal spline / flange | Pneumatics |
New energy series power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-LK31/38 | 1.043 | 300 | Suzhou green control 6s100 | Internal spline / flange | Pneumatics |
2 | SDQ-LK24/36 | 1.136 | 300 | Suzhou green control j6s95 | Internal spline / flange | Pneumatics |
3 | SDQ-LK20/56 | 1.148 | 300 | Suzhou green control j2s130 | Internal spline / flange | Pneumatics |
Export series power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | Pto1000 series | 0.6- 1.88 | 300 | EATON FS 3005/4005 EATON 6305 | Internal flange / spline | Pneumatics |
2 |
Pto2000 series |
0.6- 1.88 |
350 | Eaton fuller Eaton rt-11109a / rt-6609a rt-7608a Allison Ellison M-5600/M-6600/S-5600 S-6600 |
Internal spline / flange |
Pneumatics |
3 | 3131(BZ) | 0.84-2.9 4 | 450 | Allison Ellison MD-3000/MD-4000 | Internal spline / flange | Hydraulic (dynamic clutch) |
4 | 3252(BZ) | 0.81-1.8 5 |
300 | Allison Ellison MD-3000/MD-4000 | Internal spline / flange | Hydraulic (dynamic clutch) |
5 | 3151(BZ) |
0.84-2 |
540 | Allison Ellison MD-3000/MD-4000 | Internal spline / flange | Constant mesh |
6 |
3300 |
0.74-1 |
390 | Allison Ellison MD-1000/MD-2000 | Internal spline / flange | Hydraulic (dynamic clutch) |
7 | PTO852 | 1.13 | 650 | Allison | Internal spline / flange | Hydraulic (dynamic clutch) |
8 |
103K_03(BZ) |
0.77-0.55 |
650 | ZF ZF S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
9 |
1010K_03 (BZ) |
0.76 |
420 | ZF ZF S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |