HOWO 12 Tons 6X4 Water Fire Truck Technical specifications
Publish Time: 2017-07-30 Origin: Water Fire Truck Technical
HOWO 12 Tons 6X4 Water Fire Truck Technical specifications
unit price $81800-$89800FOB shanghai port
Vehicle performance parameters
1 , Chassis
Number: ZZ5347V4647D5 HOWO 6x4 chassis
Drive type: 6×4
Wheelbase: 4600mm+1350mm
Size: 12.00R20
2 , Engine
Model: D12.42-40
Power: 309kW(2100r/min time)
Torque: 1820N·m(1100-1500r/min)
Displacement: 11.596L
Emission compliance: GB17691-2005 IV, GB3847-2005
3 Size parameters:
Overall dimensions (length x width x height): 9930mm×2500mm×3490mm
Wheelbase: 4600mm+1350mm
Track: 2022mm/1830mm
Minimum ground clearance: 264mm
Hung long (front suspension / Rear suspension): 1500/2360mm
Approach angle / Departure angle: 16°/12°
4 Performance parameter:
Max speed: 100km/h
Minimum turning diameter: ≤23m
Maximum gradability: ≥25%
Acceleration noise outside the car: ≤84dB(A)
5 Quality parameters:
Kg gross mass: 28000kg
Containing water: water: 12000kg
6, the number of passengers (including driver): 6(person)
Second, the main structure:
1, cab
Knot Construction: flat head metal front, original double cab.
Seating settings:2+4 people.
Flip: Hydraulic turnover mechanism.
Laboratory equipment for the crew: In addition to the original vehicle equipment, plus a100W sirens, revolving lights switch, PTO switch, possessed light switches and indicator lights, radio power cord.
Lights: Top cab with long rows of flashing police lights installed 。
2 And linking each subframe
Structure: Metal welded frame-structures, before and after-through
Material: Quality Q235A carbon steels
Fixed: Connected with the chassis frame with rigid, elastic mixed
Volume 3, tank:
Liquid-carrying capacity:
l Jug containing water: 12000kg
Material Quality:
Capacity tanks made of high quality carbon steel plates welded together
Water tank structure: Jug for welded structures, before and after both sides of the plate, tank panels, vertical and horizontal control panels are equipped with increased strength ladder bars. Another maintenance manhole ring and anti-water eddies of turbulent flow structure
l Tank has 2 entrances porous, with a quick-lock and open the lid of the device.
l Tank top 1 A DN80 mm Relief valve device.
l 1 liquid level indicator.
4, fire pumps:
(1) fire:
Model: CB20.10/30.60 - TB
Rated flow: 60L/s (1.0Mpa time)
30L/s(2.0Mpa Time)
Installation type: The rear-mounted
(2), vacuum pump: piston
Maximum vacuum: 85kPa
Maximum suction depth: 7m
Diversion: ≤50s
5, fire Cannon: Shandong zhangqiu
Model: PS50-60DX
Location: Car Central
Control mode: Manually adjustable
Injection pressure: 1.0Mpa
Flow rate: 50L/s
Range: Water ≥65 m
Horizontal rotation angle: 0~360°
Spray gun elevation: ≥+60°
Spray gun depression angle: ≤-15°
6, pipe system:
(1), the suction pipe:
l 1 A DN 125mm Tank suction pipe system
l 1 DN125mm External suction pipe, inner-tube interface (Cap seal)
(2), water injection pipe
l 2 DN80 around on each side of the passenger compartment mm Outside the water, to the tank water.
l Set within the pump house 1 DN65 mm Automatic and manual pumps to the tank water piping and control valves.
(3), the outlet pipe road:
l Roof rear part 1 fire DN100mm water cannons in pipes and control valves.
l Pump rear set 4 x DN 80mm Road and the control valve outlet pipe.
l Pumping station road flanked on each set 1 DN65 pipe and control valve
(4), cooling water pipes: For the PTO to cope with all kinds of complicated situations at work, equipped with cooling water pipes and stainless steel ball valves.
(5), put the pipe:
l Water pump at the bottom with 1 DN 18mm Hoses and control valve.
(6), blow-off line:
l Tank bottom 1 DN 40mm The sewage pipes and control valves.
7, PTO:
Type: Sandwich-type full-power PTO
Manipulation: Solenoid valve, pneumatic control
Cooling method: Forced cooling.
Lubrication: Oil-splash lubrication
8 , Storage compartment and pumping stations:
Material: Body skeleton of steel profiles, outer covering of 3mm flat aluminum oxide, through advanced adhesive technologies and backbone from sticking together.
Structure: Whole frame welding structure, solid and reliable, to ensure strength and rigidity. Mask and skeleton made of imported high strength adhesive bonding (no rivets), the framework uses the aluminum joining technology, can maximize space utilization, and variability.
Ensure easy access. Interior parts that require regular testing and in the proper position and fitted with trap doors, others need access to interior inspection and maintenance are added with open or have removable plates.
Shutter: All the equipment compartment and the pump room are made of special alloy aluminum rolling doors with locks, handles and locks sturdy and durable, not deformation. After water sealing performance test.
Skirting boards: Steel frame covered with plastic aluminum diamond plate, gas springs and double locking the door, skirting the rear height is less than 450mm, static load is greater than 150Kg, safe and reliable.
Roof: Non-slip, walk
Ladder: Right side of the car, easy to combatants on and off.
9、 On the dashboard and the equipment
Dashboard is located in the tail of the car within the pump house, with adequate lighting; all control handles, switches, light near a Chinese identity; water piping layout and operation description of the step. All notes billboards and signs are durable and high adhesion, able to withstand temperature and climatic upheavals caused by the impact, not for a long time missing or illegible.
Dashboard:
l Liquid level gauge 1 only
l Tachometer 1
l Pressure gauge 1
l Vacuum table 1
l Water pump speed regulating device 1 set
l Main power switch 1
l Pump room lighting switch 1
l A variety of switches
10, additional electrical and alarm systems
l Vehicle total power of all electrical equipment below the rated power of the generator 1.4 times
l Licence holders together with the provisions of GB4785 to meet the typesetting a licence required
l Cab top-there is a long line of police lights and sirens power 100W, sirens, police lights, strobe lights circuit for independent additional circuits, controller installed inside the cab
l Body left and right upper installed 3 strobe lights (red and blue)
l Roof configuration 1 red 1 and circular lights 24V, 60W Comprehensive fire lighting
l Equipped with front and rear outline marker lights, security lights, one on each side turn signals, transport compartment, front storage compartment, pumping stations are equipped with ceiling lighting, and in accordance with the provisions of GB4785
l Side and rear sets reflective film, and in accordance with the provisions of GB7258
11, painting:
Made of high quality paints, body for the big red (fire red), rim of the outer ring, the front bumper is white, screen door for aluminum anodized color.
12, truck equipment and layout
Fire fighting equipment: Equipped with table
Equipment layout:
l Human engineering principle and design of equipment carriers
l By using logic, equipment weight and shape and frequently used placing equipment
l Design according to fight into the ring and fighting equipment integration
l Standing on the ground or the pedal 1-2 access to equipment, to ensure that the fighting expanded player non interference
Third, the General technical requirements:
l All operation switches, instruments, equipment and vehicles that complies with the specification aluminium plate sign
l Vehicle performance meets GB7956 of the fire performance requirements and test methods The provisions of
l Vehicle performance is in line with the Ministry of public security GA39. 4-92 The provisions of the General technical requirements for tank fire engine fire engine
l Fire pump performance in line with the GB6245 provisions of the performance requirements and test methods for fire pumps
l Vehicle outline dimensions, axle load and masses shall conform to GB1589 vehicles outline dimensions, axle load and mass limits the provisions of
l Vehicle lighting and signalling devices shall conform to GB4785 The motor vehicles and their trailers the provisions of regulations on the installation of lighting and light signalling devices
l Vehicle parts by forcing the supplier certification and type approval
l Vehicle appearance in compliance with Ministry of public security, GA3 9.4 The relevant provisions of the
l All welding firm, smooth, flat
Four, technical documentation:
l Certificate
l Chassis service manual
l Chassis manual
l Chassis warranty card
l Truck tool inventory
l Fire certificate
l Engine number rubbing parts
l Fire equipment list
l Fire engine manual
l Fire pump operating instructions
l Transfer list
l Invoice
l 3C certificate
Appendix 1: truck fire equipment list 12T Water Fire Truck
Serial number | The name | Model specifications | Work unit | The number of | Notes |
1 | Suction pipe | Φ125 | Root | 2 | 4m |
2 | Fire hose type 20 | 20-80-20m | Volume | 4 | |
3 | Fire hose type 20 | 20-65-20m | Volume | 8 | |
4 | Water filter | FLF125 | Parts | 1 | |
5 | Suction pipe wrench | FS125 | Parts | 2 | |
6 | Aboveground fire hydrant wrenches | FB450 | Parts | 1 | |
7 | Underground fire hydrant wrenches | FBA800 | Parts | 1 | |
8 | Water separator | FFS80 | Parts | 1 | |
9 | Water collector | FJ125-2B-1.6 | Parts | 1 | |
10 | Hose wrap | FP470 | Parts | 4 | |
11 | Hose strap | FG600 | Parts | 4 | |
12 | Water retaining bridge | FH80 | Deputy | 1 | |
13 | Adapter | Male/Φ65 female Φ80 | Nondescript animals | 2 | |
14 | Special interfaces | Φ65 button/Φ65 male | Nondescript animals | 2 | |
15 | Special interfaces | Φ80 button/Φ80 male | Nondescript animals | 2 | |
16 | DC water gun | QZG19 | Support | 2 | |
17 | Direct spray water | QWJ16 | Support | 1 | |
18 | Dry powder fire extinguisher | MFZ2 | With | 1 | |
19 | Iron collar | GT06 | The | 1 | |
20 | Spade | 2# | The | 1 | |
21 | Fire axe | GFP810 | The | 1 | |
22 | Fire escape staircases | Parts | 1 |