WLY6GS42 FZ35/45 WLY6GS42B FZ35/47 QC-QH Transmission Power Take-Offs (PTOs)
Product Description
WLY6GS42 FZ35/45 WLY6GS42B FZ35/47 QC-QH Transmission Power Take-Offs (PTOs)
WLY6GS42 + FZ35/45Matching Transmission: WLY6GS42 (6-speed, 420N·m grade)Output Gear: 35 teeth, tooth height 45mmMounting Hole Spacing: 140×105×70mmControl Mode: Pneumatic (QH) / Manual optionalOutput Type: ISO flange / Internal spline
WLY6GS42B + FZ35/47Matching Transmission: WLY6GS42B (Reinforced Version)Output Gear: 35 teeth, tooth height 47mm (higher design, higher torque capacity)Mounting Hole Spacing: 140×105×70mmControl Mode: Pneumatic (QH)Output Type: ISO flange / Internal spline
Core Parameter Comparison
| Parameter | FZ35/45 (6GS42) | FZ35/47 (6GS42B) |
|---|---|---|
| Max Output Torque | 250~350N·m | 250~400N·m |
| Gear Ratio | 1.0 (Direct Drive) | 1.0 (Direct Drive) |
| Operating Air Pressure | 0.7–0.8MPa | 0.7–0.8MPa |
| Application Working Condition | Water sprinkler truck, wrecker truck, light truck hydraulic pump | Dump truck, truck-mounted crane, heavy truck hydraulic pump |
Mounting & Interface
Installation Position: Left side of transmission (co-pilot side)Driving Mode: Direct meshing with transmission 42-tooth drive gearOutput Interface: φ35mm flange (4×M10 bolts) or 16-tooth internal spline
Common Applications
Sanitation Vehicles: Water spray pump, high-pressure cleaning pump
Engineering Vehicles: Hydraulic winch, lifting cylinder, crane
WLY 5TS40 Transmission Power Take-Off PTO SDQ-WL31/46LGQ1 for Dongfeng Truck