Mixer truck Concrete Mixer Truck Cement Mixer Suppliers
1. Introduction
UD mixer truck is a truck specially built to transport and mix concrete to the building site.<o:p>
As a professional concrete mixer truck manufacturer in china, we have dedicated to providing global clients with high-quality, low-priced mixe
2. Features
Consist of original UD Vehicles chassis, hydraulic system, elevating system and electrical system<o:p>
High strength, fine grain steel mixing drum and blade, with great anti-friction performance<o:p>
Pleasing appearance, reasonable layout, cost-effectiveness<o:p>
Pneumatic water supply, large capacity pressure water tank, three-way water supply, point-to-point flushing, up and down free, convenient and clean water tube<o:p>
Imported hydraulic elements with original package, split hydraulic system, reliable and trust worthy
3. Technical Specification
1>
| Truck Model | UD5250GJB8 |
| Engine | |
| Model | PF6 |
| Type | Diesel,4-cycle,6 cylinder in line, Electronic unit pump injection, Turbocharger, Water cooled |
| Max. Gross output (kw/rpm) | 235/2,100 |
| Drum Specifications | |
| Geometric volume (m3) | 14.3 |
| Nominal capacity (m3) | 8 |
| Drum rotations (rpm) | 0~14 |
| Feeding speed (m3/min) | 3 |
| Discharge speed (m3/min) | 2 |
| Discharge residual percentage | 0.5% |
| Hydraulic system | |
| Reducer type | Bonfiglioli / ZF |
| Oil pump type | Eaton / Rexroth |
| Motor type | Eaton / Rexroth |
| Hydraulic circuit | Close loop, split type |
| Water supply system | |
| Water tank capacity (L) | 400 |
| Water pressure (bar) | 3.8 |
| Water supply model | Pneumatic water supply |
| Control system | |
| Control mode | Mechanical control system |
2>
| Concrete mixer truck model | Chassis model | Chassis manufacturer | Overall dimension (L×W×H) (mm) | Kerb weight / payload (kg) | Engine model / power (kw) |
| 5240GJBUD | DND5241GJBCWB452K | Dongfeng Nissan | 8960×2490×3830 | 12460/11345 | PF6/235 |
| Configuration and Technical Specifications | |||||
| Hydraulic system | Mixer | ||||
| Mixing volume | 8/9/10 (m3) | Mixer parameter | Mixer tank volume | 14.6/15.1/16.2 (m3) | |
| Oil pump | Model | A4VTG90 German Rexroth | Padding rate | 63 (%) | |
| Max. working pressure / displacement | 42MPa / 90ml/rev. | Charging speed | ≥3 (m3/ min) | ||
| Model | Italy ARK PV89MH\20 | Discharging speed | ≥2 (m3/ min) | ||
| Motor | Model | AA2FM80 German Rexroth | Residual rate | <1 (%) | |
| Max. working pressure / displacement | 42MPa / 80ml/rev | Speed of agitator | 0~12 (r/min) | ||
| Model | Italy ARK MF89V\20 | Mixer tank gradient | 13~15 (°) | ||
| Decelerator | Model | Italy PMP PMB6SP/7SP | Ground clearance | 70~260 mm | |
| Reduction ratio I | 99.9 (121.6) | Material of tank-body | B520JJ high strength wearable steel plate from BaoSteel Group | ||
| Model | Italy TOPUNION P68/58 | Material of spiral blade | |||
| Reduction ratio I | 100 | Water supply system | The way of water supply | Compressed air | |
| Cooler | Type/oil tank volume | Germany AKG or Chinese cooler/25L | Water tank volume (L) | 350 | |