SITRAK Vertical Pump Water Supply Drainage Rescue Truck

SITRAK Vertical Pump Water Supply Drainage Rescue Truck

Special  vehicle used for emergency Water supply or Flood drainage pumping  

Purpose:

Drainage pump, drought, water supply

Application field:

Municipal and highway emergency drainage; Surprise flood control and drainage, cofferdam pumping; Drought relief, agricultural irrigation; Aquaculture; Pumping and drainage in areas without fixed pumping stations and power supply. Especially suitable for well drainage operations, urban roads, overpasses, underpass Bridges, tunnel drainage, highway main line and access ramp and other places of water removal.

Full hydraulic, no electricity safety, easy to operate

Water pumper system

1. Water pump drive mode: hydraulic drive

2. Total flow: ≥ 3000 m3/h

3. Head: ≥ 15 m

4. Minimum working depth of water pump suction port from water surface: ≤ 0.5 m

5. The water pump power comes from the engine on the original car chassis, and no additional power source is required

6. Fouling caps are installed at the pump port to effectively intercept floating objects and stones with a diameter of more than 3cm

7. The pump is penetrated into the water through the upper mechanical structure without the need for manpower or other auxiliary equipment

8. In vertical ground pumping and drainage operation, the maximum effective depth of pumping water can be achieved when the pump is extended below the ground

9. The working mechanism of the water pump shall be able to work over the municipal guardrail, and the crossing height shall not be less than 1m, and the crossing distance shall not be less than 1m

Lighting system

Multi-light source arrangement to meet the lighting needs of different working areas

LED light source, total power: 100w

Water supply system

It has the function of supplying water to the fire engine: the water can be diverted from the water outlet diameter of the water intake system to the water belt of 80 diameter (or 65 diameter) through the water separator of DN80 (or DN65), and then conveyed to the fire engine with no less than 2 adapters

It has the function of supplying water to the remote water supply system: it can directly supply water to the remote water supply system through the adapter from DN250 to DN300, and there are no less than 2 adapters

Drainage Water Fire Hose

Dimensions: Caliber: DN300

Material: Polyurethane material

Bearing pressure: The working pressure is not less than 0.3 MPa, and the burst pressure is not less than 0.9 MPa

The total length of water hoses: ≥ 240m, and the length of each plate is 30m, of which the length of the vehicle is ≥ 120m, and the length of the spare water hose is ≥ 120m

Connectors and Accessories

Material: aluminum alloy (technical specification verification); Model: Specific model is equipped according to the requirements of the user unit

Quantity: According to the water belt length of 240m, the standard equipment is used

Drain hose winch

Winch reels: 4 pairs

Length of drain pipe: at least 30 meters drain hose/pair

Winch Drive: Hydraulic Drive

Parts List

Water intake strainer 2 pcs.

4 width indicator lamps

Equipment door induction 2pcs

10 pcs fuses of various models

4pcs relays

Diesel filter cartridge 1pcs

1 x oil filter element

Oil seal 1pcs.

Main technical parameters

Keystone Vessel  Industrial Gas Cylinders| ISO Tank|Pressure Vessel| UN Portable Tanks- Dong Runze Special Vehicle

Keystone Vessel Manufacturing Co., Ltd