SINOTRUK HOWO 4x2 Foam Fire Fighting Truck 6000L Water + 2000L Foam

SINOTRUK HOWO 4x2 Foam Fire Fighting Truck 6000L Water + 2000L Foam

HOWO high pressure foam fire truck is built for firefighting and emergency response. This HOWO 300HP 4x2 foam fire truck features a 6000L water tank, a 2000L foam tank, a CB10/60 fire pump (60 L/s at 1.0 MPa), and a roof mounted PL8/48 fire monitor with 65m water range and 60m foam range.

This fire truck carries a full set of standard firefighting equipment including hoses, suction tubes, couplings, and a foam gun. It works well for Class B fires involving oil, gasoline, and chemicals. It suits firefighting tasks at oil depots, chemical plants, airports, and industrial facilities.

HOWO 4X2 8CBM Foam Fire Fighting vehicle

» Ⅰ.Main Features :

★ WD615.92 engine rated at 300 HP for high pressure foam fire suppression and emergency response

★ HOWO 4×2 chassis with 6000L water tank, 2000L foam tank, and CB10/60 fire pump (60 L/s at 1.0 MPa)

★ Roof mounted PL8/48 monitor with 48 L/s flow, water range ≥65 m, and foam range ≥60 m for long distance fire attack

★12R22.5、 315/80R22.5 tires and 4600 mm wheelbase for stable handling on various road conditions

★ Full firefighting equipment including hoses, nozzles, foam gun, and basic tool kit for Class B fire fighting

» Ⅱ.Product Parameter :

» Ⅲ.Products Description :

1. Chassis & Powertrain

♦ SINOTRUK HOWO 4×2 chassis with 4600 mm wheelbase, designed for stable operation on urban roads and industrial sites.

♦ WD615.92 diesel engine, rated at 300 HP, delivering reliable torque for quick response, continuous pump operation, and long-duration foam fire suppression.

♦ Manual transmission for straightforward operation and easy maintenance.

2. Fire Suppression & Lighting System

♦ 6000L water tank and 2000L foam tank, carbon steel construction with internal baffles to reduce liquid surge.

♦ CB10/60 fire pump, 60 L/s flow at 1.0 MPa, PTO driven, 3m suction height, ≤50s priming time.

♦ PL8/48 roof monitor, 48 L/s flow, water range ≥65 m, foam range ≥60 m, horizontal 360° rotation, pitch -35° to +70°.

» Ⅳ.Product Details :

 

» Ⅴ.Fire Pump System :

Fire Pump:

A CB10/60 fire pump with a rated flow of 60 L/s at 1.0 MPa is installed in the rear pump room. This pump is built for reliable performance, providing steady water pressure to ensure fire hoses and monitors can deliver water or foam effectively over long distances for fire suppression.

Control panel: Includes operating instructions, tank piping diagram, pressure gauge, water level gauge, foam level gauge, emergency stop, PTO control, main power switch, pump controls, ladder controls, and compartment lighting. All controls are clearly marked for straightforward operation.

» Ⅵ.Fire Monitor System :

The PL8/48 fire monitor is mounted on the cab roof. It delivers a flow rate of 48 L/s with a water range of ≥65 m and a foam range of ≥60 m. The monitor supports both straight stream and spray patterns for flexible firefighting operations.

» Ⅶ.Firefighting Equipment :

• Equipment Room

Located on both sides of the vehicle, these compartments are equipped with equipment racks and storage trays. The racks keep fire hoses, suction tubes, and foam guns neatly organized. The storage trays provide quick access to tools like wrenches, axes, and crowbars, improving rescue efficiency.

Pump Room: Equipped with fire hoses, water collectors, filters, fire nozzles, foam guns, suction hose wrenches, reducers, etc.

HOWO high pressure foam fire truck comes with a rear-mounted CB10/60 fire pump and a cab roof mounted PL8/48 monitor. The water tank holds 6,000 liters, and the foam tank holds 2,000 liters, sitting on a sturdy HOWO 4×2 chassis powered by a 300 HP WD615.92 engine. Standard gear includes fire hoses, suction tubes, couplings, a foam gun, and a complete tool kit.

Full specifications are listed below: