NISSAN 4x2 Refuse 5-6m3 Compactor Garbage Truck
Product Description
NISSAN 4x2 refuse 5-6m3 Compactor Truck
NEW NT400 NISSAN garbage truck
It is used for compresion garbage station to transfer garbage compress bins.
Operating system is a hydraulic control system.
The cabinet is made of high-quality carbon steel plate and welded structure, with high strength, light weight, this design can stop produce secondary pollution.
Technical Data Sheet
Product | NISSAN 5-6m3 compression garbage truck | |
Chassis type | ZN1080A5ZJ | |
Cubage(T) | 5-6 | |
Parameters | Overall dimension length/width/height (mm) | 6590×2090×2500 |
Total Mass(kg) | 7600 | |
Payload(kg) | 3000 | |
Kerb Mass(kg) | 4405 | |
Approach angle/ Departure angle(mm) | 22/14 | |
Front suspension/rear suspension(mm) | 1069/2172 | |
Fuel Type | diesel | |
Fuel Consumption/100 km | ||
Max Speed | 115 | |
Engine | Type | ZD30D14-3N |
Displacement/Power(kw) | 2953/103 | |
Manufacturer | Dongfeng light Diesel Engine Co., Ltd | |
Type | Straight in line,4 stroke,diesel engine | |
Chassis | Drive type | 4x2 |
Wheelbase(mm) | 3349 | |
Tread(front/rear) | 1940/1860 | |
Front axle load capacity (kg) | 2400 | |
Rear axle load capacity (kg) | 5200 | |
Steering gear | Hydraulic power steering assistance | |
Transmission | 5 forwarder,1 reverse gear,manuel operation | |
Clutch | Diaphragm clutch, hydraulic remote control, pneumatic servo | |
Braking system | Diaphragm clutch, hydraulic remote control, pneumatic servo | |
Cab | Non-longheaded, one and a half row cab,whole metal-enclosed | |
Number of spring axle(front/rear) | 8/13 | |
Tire Type | 7.00-16 | |
Air-condition | With air-conditioner |
Vehicle No: TIC5080ZYSZN compression garbage truck ,refuse compression garbage truck | |
Chassis modle : ZN1080A5ZJ Total Mass(kg) :7600 Rated loading mass(Kg):2420 Unladen mass(Kg):4985 Mast speed: 95m/h) Drive type: 4*2 LHD Min turing radius :6550mm | Outline dimensions (mm): 6590*2090*2500 Wheelbase : 3349mm Approach/Departure Angl: 22/13 Front/Back overhang(mm)1069/2172 Gradeablity :30% |
--------Chassis technical parameters | |
Modle No: ZN1080A5ZJ Axle: 2 Wheelbase:3349 mm Axle load: 2400/5200 Tire; 7.00-16LT/7.50-16LT EmissionStandard:GB17691-2005Euro3,GB3847-2005 | Type of fuel: diesel Front Axle:1556 Back Axle:1478 Tire NO:6 Number of cab: 3 Spring: 6/5+5 |
--------engine parameters | |
Engine No: ZD30D14 3N Series :ZD30 Displacement (ml):2953 Power(kw ):103 Intake form: Turbocharged Cylinders arranged in the form:line Rated speed : 3600RPM Max torque : 280N.m Engine type :lnline four-cylinder four-stroke Cylinders material : cast iron type:Common rail, water cooled Diesel engine | Brand : DongFeng Manufacture:Dongfeng Light Engine Co., Ltd. Numbers of cylinders: 4 Emission standards: Europ 3 Max horsepower:140hp Max torque speed: 1600r/min Compression ratio: 16.9:1 Cylinders stroke :102 Firing order : 1-3-4-2 Cylinders head material :aluminum |
----------Transmission : | |
5MT / Floor-type Type: Mechanical Modle:RS5R95A Mode of operation :Manual operation Forward block number:5 The gear ratio:5.015,2.543,1.536,1.000,0.789,R4.481 | |
The form of the drive : Rear-wheel drive | |
------------Braking system | |
Form of brake :front wheel ,rear drum brake Load sensing proportiong valve (lsv): Abs :optional Parking brake:center rod Parking brake type :brake handbrake | |
-------------suspension system | |
Front/Back overhang: spring Front :6 Real :5+5 Reed plate number : 6/5+5 | |
--------steering system | |
Power steering Steering wheel :two pieces connect | |
--------Cabin | |
Single-row Numer of crew :3 Numbers of doors :2 Steering wheel surface material :pvc plastic Dashboard display type:pointer Inside the power supply voltage:12V Doors and door panels: standard contain explosion-proof lever door Meter : standard digital clock Wiper ,two-speed with varable gap Sound: standard radio ,Cab can flip | |
-----------other standard | |
1:heatings and air conditions 2:power steering 3:axle:modle Donfeng dana 4:manual axis equalizer plain glass 5:optional airb | |
--------Speccial Function | |
Cylinder volume :6CBM Filled pull along the ground clearance : 860(mm) The cycle time of filling jobs :30 s A row of working time unloading garbage :40 s A loading device filled garbage time :12 s Max braking compression force : 16 Max unloading force row :18 t Lifting time of filling device :15 s automate good sealing Hydraulic compression automatic lifting hopper flat launch material |
Compression type garbage truck garbage from the sealed compartment, hydraulic system, operating system components. Type of vehicle is fully sealed, self-compression, self-dumping, all the compression process of sewage effluent into the car, a more radical solution of the waste during transport secondary pollution problems, the key parts are imported components, with pressure, sealing good, easy operation, and safety. After the hanging bucket optional flip flip agencies or institutions refuse bucket.
The salient features than other garbage truck
garbage collection is simple:
a change in the city streets of the dirty past of placing trash, to prevent secondary pollution. 1:compression ratio, load capacity:
maximum crushing pressure of 12 tons, the equivalent load of garbage with tons of uncompressed row two and a half.2:process automation:
the use of imported computer control system, fill rows of unloading all the required drivers operating in one operation, not only to reduce the labor intensity of sanitation workers, but also greatly improve the working environment.3:economic good:
the work of special equipment, the computer control system automatically controls the throttle.
4:double insurance system: