Isuzu Sewer Flushing And Cleaning Truck 10KL Sewage+5KL Clean Water
truck view
ISUZU 15000L Combined Vacuum High Pressure Jetting Truck | Sewer Cleaning Suction Truck
ISUZU 15000Liters Sludge Suction Water Jetting Truck
Combined Vacuum High Pressure Jetting Tanker Truck | 10KL Sewage Tank + 5KL Clean Water Tank
Product Overview
Basic Vehicle Parameters
| Item | Specification |
|---|---|
| Complete Vehicle Model | DRZ5180GXWQL |
| Drive Form | 4×2 Single Axle |
| Gross Vehicle Weight | 18000 KG |
| Curb Weight | 10690 KG |
| Tank Capacity | 10000L Vacuum Sewage Tank + 5000L High-Pressure Clean Water Tank (Total 15000L) |
| Max Travel Speed | 105 KM/H |
| Overall Dimension (LWH) | 8420 × 2530 × 3550 MM |
| Wheelbase | 5000 MM |
| Tire Spec | 295/80R22.5, 6+1 tires |
| Steering Type | Left Hand Drive (LHD) |
| Brake System | Full Air Brake |
Engine Configuration
| Item | Parameter |
|---|---|
| Engine Model | 6HK1-TCG61 Inline 6-Cylinder Water-Cooled Diesel Engine |
| Rated Power | 240HP / 177KW |
| Displacement | 7790 ML |
| Emission Standard | Euro 6 |
| Fuel Type | Diesel |
Transmission & Chassis
Chassis Brand: Qingling ISUZU Original Chassis
Gearbox: FAST 8-Speed Manual Transmission
Power Take-off: Dual-side chassis PTO, drives vacuum pump & jet pump synchronously
Core Working Pump System
1. SK-12 Water Ring Vacuum Pump (Sludge Suction System)
| SK-12 Vacuum Pump Parameter | Data |
|---|---|
| Air Extraction Rate | 12 m³/min |
| Matching Power | 18.5 KW |
| Rated Rotating Speed | 970 RPM |
| Ultimate Vacuum Degree | -710 mmHg / -0.093 MPa |
| Inlet & Outlet Caliber | 80 MM |
| Water Consumption | 40~50 L/min |
| Compressor Pressure Range | 0~1 MPa |
| Model | Suction Volume(m³/min) | Ultimate Vacuum (mmHg) | Matched Power (KW) | Rotate Speed (RPM) | Inlet/Outlet Caliber(MM) | Water Consumption(L/min) |
|---|---|---|---|---|---|---|
| SK-1.5 | 1.5 | -680 | 3 | 1450 | 70 | 10~15 |
| SK-3 | 3 | -710 | 5.5 | 1450 | 70 | 15~20 |
| SK-6 | 6 | -710 | 11 | 1450 | 80 | 20~30 |
| SK-9 | 9 | -710 | 15 | 970 | 80 | 30~40 |
| SK-12 | 12 | -710 | 18.5 | 970 | 80 | 40~50 |
| SK-15 | 15 | -710 | 30 | 970 | 80 | 50~60 |
| SK-20 | 20 | -710 | 37 | 740 | 150 | 60~80 |
| SK-30 | 30 | -710 | 55 | 740 | 150 | 70~100 |
| SK-42 | 42 | -710 | 75 | 740 | 150 | 95~130 |
| SK-60 | 60 | -710 | 95 | 590 | 250 | 140~180 |
| SK-85 | 85 | -710 | 132 | 590 | 250 | 180~220 |
| SK-120 | 120 | -710 | 185 | 590 | 300 | 220~260 |
Standard atmospheric pressure: 0.1013MPa (760mmHg)
Inlet water temperature: 15℃
Suction air temperature: 20℃
Relative humidity: 70%
Performance tolerance: ±10%
2. 350TJ High Pressure Jet Pump (Pipeline Flushing System)
| 350TJ Jet Pump Parameter | Specification |
|---|---|
| Pump Type | Three-Plunger High Pressure Pump |
| Max Flow Rate | 350 L/min |
| Working Pressure | 24 MPa |
| Supporting Hose Reel | Rear Hydraulic Rotary Reel |
| Matching High Pressure Hose | 60m Length, Φ19 Diameter |
Vehicle Core Configuration Details
1. Power & Chassis System
2. Split 15000L Integrated Tank Body
Separate double-compartment tank: independent clean water cabin and sewage sludge cabin, adjustable volume ratio via connecting ball valves to adapt different working demands.
Thickened anti-corrosion steel plate forming, internal anti-surge baffle to prevent liquid sloshing during driving, improve road safety.
Inner wall anti-rust & anti-corrosion coating, extend tank service life and cut later maintenance cost.
Hydraulic full-open rear cover + large-angle hydraulic lifting mechanism: high-concentration viscous sludge can be fully discharged without residue.
Overflow liquid level alarm device installed to avoid sewage overflow during suction work.
3. Complete Auxiliary Hydraulic & Control Parts
Multi-way hydraulic control valve: centralized control for reel retraction, tank lifting, rear cover opening and pump operation
Hydraulic rotary hose reel: automatic retraction of 60m high-pressure jet hose, labor-saving operation
Independent hydraulic oil tank: stable hydraulic power supply for all hydraulic components
Water-air separator: protect vacuum pump from sewage and impurity damage
Dry-wet dual filters: secondary filtration of suction waste to extend pump service life
Rear sewage discharge outlet: quick coupling design for fast sludge unloading
LED overflow alarm system: real-time remind tank full status
Working Principle of ISUZU Vacuum Jetting Truck
- Pipeline Blockage RemovalHigh-pressure water jet sprays through special nozzles, relying on reverse thrust to feed the hose deep into drainage pipes. High-speed water flow breaks solid silt, grease and root blockages, washes sticky residues off pipe inner walls.
- Vacuum Sludge SuctionSK-12 water ring vacuum pump creates negative pressure inside the sewage tank. Atmospheric pressure pushes sludge, sewage and waste water into the vacuum tank through suction pipeline. Water ring sealing structure avoids sewage backflow and pump clogging during long-hour suction work.
- Flexible Tank Volume AllocationTwo independent sealed cabins store clean flushing water and sucked sewage separately. Interconnected ball valves allow free adjustment of effective volume between clean water tank and sewage tank, one truck satisfies both pipe cleaning and waste collection demands.
- Efficient Sludge DischargingTwo unloading modes optional: positive pressure air discharge or hydraulic tilting dumping. Large-angle tank lifting together with fully open rear cover realizes one-time complete discharge of thick sludge without manual cleaning.
Wide Application Scenarios of Combined Vacuum Jetting Truck
This multi-functional ISUZU sludge suction water jetting truck is widely applied in municipal, industrial, property and environmental protection fields:
✅ Municipal Engineering: City sewer dredging, storm drain cleaning, inspection well silt removal, pipeline grease cleaning, urban flood drainage treatment
✅ Industrial Factory: Industrial drainage pipeline cleaning, chemical pipe waste clearance, cooling circulation pipeline maintenance
✅ Property & Catering Service: Residential community pipeline dredging, restaurant grease trap cleaning, school & mall sewage well maintenance
✅ Environmental Sanitation: Septic tank cleaning, livestock manure transportation, river sediment suction
✅ Multi-scene Washing: Road surface cleaning, wall graffiti washing, traffic sign & urban sculpture high-pressure washing
Isuzu Sewer Flushing And Cleaning Truck 10KL Sewage+5KL Clean Water Sludge Suction Water Jetting Truck | |||
| Overall | Vehicle Model | DRZ5180GXWQL | |
| Drive Type | 4×2 | ||
| Gross Vehicle Weight | 18000 kg | ||
| Curb Weight | 10690 kg | ||
| Capacity | 10000L vacuum tank+5000L cleaning water tank | ||
| Maximum Speed | 105 km/h | ||
| Overall Dimensions(L*W*H) | 8420×2530×3550 mm | ||
| Engine | Engine Model | 6HK1-TCG61 | |
| Fuel Type | Diesel | ||
| Power | 240HP/177kW | ||
| Emission Standard | Euro 6 | ||
| Displacement | 7790 ml | ||
| Engine Type | Inline 6-cylinder water-cooled diesel engine | ||
| Chassis | Chassis Brand | Qingling | |
| Tire No. | 6+1 | ||
| Tire Specification | 295/80R22.5 | ||
| Wheelbase (mm) | 5000 mm | ||
| Gear Box | FAST 8-Speed | ||
| Steering Wheel | LHD | ||
| Brake | Air | ||
| Vacuum Pump | Model | SK-12 | |
| Air Extraction Rate | 12 m³/min | ||
| Power | 18.5 kW | ||
| Pump Speed | 970 rpm/min | ||
| Compressor Pressure | 0-1 Mpa | ||
| Caliber | inlet | 80 mm | |
| output | 80 mm | ||
| Water Consumption | 40~50 L/min | ||
| High Pressure Jet Pump | Model | 350TJ | |
| Flow Rate | 350 L/min | ||
| Pressure | 24 MPa | ||
| Hose Reel | 60m rear mounted reel ∮19 hose | ||
Product Core Advantages
☑ Large 15000L split tank: Reduce frequent round trips for waste transfer, boost daily working throughput
☑ Stable 240HP 6HK1 ISUZU engine: Sufficient power output, maintain stable vacuum suction under heavy sludge operation
☑ Flexible 4×2 urban chassis: Compact size & short wheelbase, freely pass narrow urban streets and residential lanes
☑ All-in-one dual-function design: Integrate pipeline dredging, sewage suction and waste collection, cut investment of separate jet truck and suction truck
☑ Low-maintenance pump system: Water ring vacuum pump anti-block & anti-corrosion design, spare parts easy to source
☑ Full hydraulic operation: Centralized control panel, single operator can finish all cleaning & suction work
Customization & After-Sales Service
Custom Design Available: We adjust tank volume, pump models, hose length, chassis brand (ISUZU/HOWO/FAW) according to customer actual working demands
Factory Direct Supply: Competitive factory price with strict QC inspection before delivery
Professional R&D Team: Experienced engineering team supports technical solution design for special working conditions
Fast Production & Prompt Delivery: Standard models in stock, customized orders arranged production quickly
Global After-Sales Support: 24/7 online technical consultation, 7-day global service response
Full Range Spare Parts Supply: Original ISUZU chassis parts, OEM vacuum pump & jet pump replacement parts with favorable discount, keep your sanitation truck stable operation
ISUZU 15000L Combined Vacuum High Pressure Jetting Truck | 10KL Sewage +5KL Clean Water Sewer Cleaning Truck FactoryChina factory ISUZU 4×2 15000L sludge suction water jetting truck with 240HP 6HK1 engine, SK-12 vacuum pump & 350TJ high pressure jet pump. Multi-function sewer dredging, septic tank cleaning, municipal pipeline maintenance truck, customizable, Euro 6 emission. Inquiry now!
Chassis Model | Horsepower | Wheelbase | Engine Model | Transmission Option | Cab Configuration |
ISUZU FVR (4x2) | 240 HP | 4500/5550/5800 /6300/7150 | 6HK1-TCG61 | FAST 8-speed Transmission | New ISUZU VC61 Series Cab |
ISUZU FVZ (4x2 /6x4) | 300 HP | 4500/ 7150 4350+1370/4650+1370 5100+1370/5800+1370 1850+2980+1370 1850+4575+1370 | 6HK1-TCG60 | FAST 9-speed Transmission | New ISUZU VC61 Series Cab |
ISUZU VC66 Series 6x4 | 350 HP | 1850+4575+1370 | 6UZ1-TCG61 | ZF 8-speed (ZF8) / FAST 12-speed | New ISUZU VC61 Series Cab |
ISUZU VC66 Series (4x2 /6x4/8x4) | 380 HP | 3900/4600/5600 3900+1370 3985+1370 4600+1370 1850+3000+1370 1850+2980+1370 | 6UZ1-TCG61 | ZF 8-speed (ZF8) / FAST 12-speed | New ISUZU VC61 Series Cab |
ISUZU VC66 Series(6x4 ) | 420 HP | 4800+1370 5200+1370 | 6WG1-TCG60 | ZF 8-speed (ZF8) / FAST 12-speed | New ISUZU VC61 Series Cab |
ISUZU VC66 Series | 460 HP | 4600 4600+1370 4800+1370 5200+1370 5400+1370 2100+4325+1370 1850+4575+1370 | 6WG1-TCG61 | ZF 8-speed (ZF8) / FAST 12-speed | New ISUZU VC61 Series Cab |
ISUZU VC66 Series( 6x4/8x4) | 520 HP | 4800+1370 5400+1370 2100+4325+1370 | 6WG1-TCG62 | ZF 8-speed (ZF8) / FAST 12-speed | New ISUZU VC61 Series Cab |
ISUZU Vac tanker truck