HOWO Vacuum Super Sucker Septic Tanker Truck 20m3 with Liquid Ring Vac Pump
Over view
HOWO Vacuum Super Sucker Septic Tanker Truck 20m3 with Liquid Ring Vac Pump
The Howo 14 -20CBM vacuum sucker truck is a heavy-duty waste collection vehicle built on the proven Sinotruk Howo 6×4 chassis. Powered by a 400 HP WP12 .400E diesel engine and fitted with a high-performance 2EBA204 /2BE253 water ring rotary vacuum pump, this truck delivers strong, reliable suction for sludge, sewage, fecal matter, and liquid waste across municipal, industrial, and agricultural job sites.
With a sealed 14,000-20000liter high-strength steel tank and a flexible suction hose system, the Howo vacuum suction truck efficiently pulls waste from septic tanks, sewer lines, lagoons, and drainage pits, then transports it to designated treatment facilities — reducing environmental pollution and maintaining public health.
Key Features & Advantages
Powerful WP12 Diesel Engine — 400 HP (WP12 400E), Euro 2-6 emission standard, proven durability for harsh operating conditions.
2EBA204 /2BE253 Water Ring Vacuum Pump — rotary vane design generates deep, continuous vacuum suction for fast waste loading.
HW1971 Patented Transmission — 10-speed gearbox, extremely reliable under heavy loads.
HC16 Driving Axle with Hub Reduction — enhanced traction and torque for off-road and rough terrain.
Heavy-Duty Suspension — reinforced leaf spring setup engineered for African and developing-market road conditions.
400L Fuel Tank — extended range for long-distance hauling and remote work sites.
Sealed High-Strength Steel Tank — 14,000 -20000L capacity, withstands high vacuum pressure, corrosion-resistant coating.
Flexible Suction Piping — quick-connect hoses for easy handling and connection to any waste source.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | DRZ5290XWZZ |
| Tank Capacity | 14,000 -20000liters (14 -20 CBM) |
| Drive Type | 6×4 |
| Engine Model | WP12 400E |
| Engine Power | 400 HP |
| Emission Standard | Euro 2 /3/5/6 |
| Vacuum Pump | 2EBA204 -2BE253 Water Ring Rotary Vacuum Pump |
| Transmission | HW1971 (10-speed, patented) |
| Driving Axle | HC16 with hub reduction |
| Fuel Tank | 400 L |
| Tank Material | High-strength sealed steel |
| Application | Sewage, fecal sludge, liquid & solid waste |
Applications
The Howo vacuum sucker truck is widely used in:
Municipal sanitation — septic tank cleaning, sewer line maintenance, public toilet emptying
Livestock farms — manure and slurry collection and transport
Agriculture — farmland waste management, biogas digester cleaning
Sewage treatment plants — sludge transfer and waste hauling
Industrial sites — wastewater pit cleaning, factory drainage maintenance
Urban & rural cleaning operations — efficient, energy-saving, environmentally friendly waste removal
Why Choose Our Howo Vacuum Sucker Truck?
Genuine Sinotruk Howo chassis — worldwide parts availability and proven after-sales support.
Factory-direct pricing — competitive export prices from China manufacturer.
Customizable configurations — tank capacity, pump type, and accessories can be tailored to your market.
Export-ready packaging — CKD / SKD / full unit shipping by container or ro-ro vessel.
Global shipping — FOB / CIF / DDP to Africa, Middle East, Southeast Asia, Latin America, and more.
Frequently Asked Questions
Q: What is the maximum suction depth of the 2EBA204 vacuum pump?A: The 2EBA204 / 2BE253 water ring pump supports a suction depth of up to 6–8 meters, suitable for most septic tanks and sewer pits.
Q: Can the tank capacity be changed from 14 -20 CBM?A: Yes. We offer 8 CBM, 10 CBM, 12 CBM, 16 CBM, and 20 CBM configurations on Howo 4×2, 6×4, and 8×4 chassis.
Q: Is the Howo vacuum truck suitable for African road conditions?A: Yes. The HC16 hub-reduction axle, heavy-duty suspension, and high-ground-clearance chassis are specifically designed for rough and unpaved roads.
Q: What payment and shipping terms do you accept?A: We accept T/T, and other negotiated terms. Shipping via container, bulk carrier, or ro-ro to any major port worldwide.
| Feature | Specification |
|---|---|
| Tank Capacity | Customizable (14,000 – 20,000 L) |
| Vacuum Pump | High-efficiency liquid-ring / rotary vane pump |
| Tank Material | Carbon steel / stainless steel (anti-corrosion) |
| Suction Depth | Up to 6 – 10 meters |
| Discharge Method | Hydraulic tipping + gravity / pressure discharge |
| Chassis Options | HOWO, Shacman, Isuzu, Foton, FAW, Dongfeng |
| General Description | |||
| truck model | DRZ290XWZZ | ||
| Cab | HW76 Flat-top single row cab, with power steering. Electronic flameout, A/C | ||
| Driving Type | 6x4Left hand driving | ||
| Max Speed (km/h) | 90 | ||
| Overall dimension(mm) | 9420/10000×2500×3455 | ||
| GVW( kg) | 25000 | ||
| Mass in working order ( kg) | 13575 | ||
| Wheelbase(mm) | 4625+1350 | ||
| F/R track base (mm) | 2022/1830 | ||
| F/R overhang (mm) | 1500/2380 | ||
| Approach/Departure Angel | 16/14 | ||
| Tire | 295/80R22.5 (10+1) | ||
| Clutch | Single-plate dry diaphragm spring clutch | ||
| Steering | Hydraulic steering with power assistance | ||
| Gear box | 10-speed | ||
| Bridge | Front axle | 7T | |
| Rear axle | 13T+13T | ||
| Enging | Model | WP12 . 400E | |
| Fuel Type | Diesel fuel | ||
| Type | Water-cooled six-stroke,, direct injection, turbocharged | ||
| Exhaust(ml) | 11596 | ||
| Max output power/rotate speed (kw /rpm ) | 294/1900 | ||
| Max torque/rotate speed(N.m/rpm) | 1350/1100~1600 | ||
| Braking system | Service Brake | Compressed air brake | |
| Park Brake | Spring energy | ||
| Auxiliary brake | engine exhaust brake | ||
| Eletric system | 24v | ||
| Upper body specification | |||
| Volume of tank | 14 -20m3 | ||
| Color | Painted in the corporation's colours with logo on both front doors as specified by the client | ||
| Material of tanker | 5mm Carbon stell (Q235) | ||
| Special function | Suction height | ≥9(m) | |
| Suction time | 250(S) | ||
| Maximum Inclination Angle | ≥45° | ||
| maximum vacuum | ≥11 MPa | ||
| Lifting time | ≤45 S | ||
| the Cover opening Angle | ≥75° | ||
| The cover opening time | ≤25 S | ||
| Suction pipe | 3m length and 100 mm in diameter | ||
| Hose Racks | Fitted on both sides of tank, to accommodate a minimum of seven hoses each | ||
| Fittings | Four-way change valve fitted to pump | ||
| Drain separator | |||
| vacuum pump | |||
| Fully opening rear door | |||
| Sight glasses at top and bottom of tank | |||
| Ladder: For access to top of tank complete with cat walk on top of tank | |||
| vacuum pump | pump type | 2BEA204 water ring pump | |
| Max Air Flow | 11000L/min | ||
| Time to suction full tank | 12-15 minuted | ||
| Suction Depth | 8 m | ||
| suction pressure (MPa) | 5.4 | ||
| diameter (mm) | 80 | ||
| Brief introduction of function | It is formed of PTO, transmission shaft, vacuum pump, tanker, hydraulic system and pipe system. | ||
2BEA water rotary vacuum pump specification:
| 2BEA Series Liquid Ring Vacuum Pump — Technical Specifications | |||||||
| Model | Max. Vacuum Degree | Vacuum Speed (m³/h) | Rotating Speed (r/min) | Motor Power (kW) | Motor Model (380V) | Water Flow (m³/h) | Weight (kg) |
| 2BEA 102 | 33 mbar (−0.098 MPa) | 210 | 1450 (Direct) | 5 | Y132M-4 | 300 | |
| 235 | 1300 (Belt) | 5.8 | Y132M-4 | 320 | |||
| 270 | 1625 (Belt) | 6.8 | Y132M-4 | 320 | |||
| 290 | 1750 (Belt) | 8 | Y160M-4 | 350 | |||
| 2BEA 103 | 33 mbar (−0.098 MPa) | 300 | 1450 (Direct) | 7 | Y160M-4 | 350 | |
| 340 | 1300 (Belt) | 8.2 | Y160M-4 | 370 | |||
| 385 | 1625 (Belt) | 9.9 | Y160L-4 | 390 | |||
| 412 | 1750 (Belt) | 11.1 | Y160L-4 | 390 | |||
| 2BEA 153 | 33 mbar (−0.098 MPa) | 600 | 1450 (Direct) | 18.5 | Y180M-4 | 533 | |
| 445 | 1100 (Belt) | 15 | Y160L-4 | 480 | |||
| 540 | 1300 (Belt) | 18.5 | Y180M-4 | 533 | |||
| 660 | 1625 (Belt) | 22 | Y180L-4 | 551 | |||
| 700 | 1750 (Belt) | 30 | Y200L-4 | 601 | |||
| 2BEA 202 | 33 mbar (−0.098 MPa) | 760 | 970 (Direct) | 22 | Y200L2-6 | 0.7–2.1 | 875 |
| 590 | 790 (Belt) | 18.5 | Y180M-4 | 0.57–1.7 | 850 | ||
| 670 | 880 (Belt) | 18.5 | Y180M-4 | 0.63–1.9 | 850 | ||
| 850 | 1100 (Belt) | 30 | Y200L-4 | 0.77–2.3 | 940 | ||
| 890 | 1170 (Belt) | 30 | Y200L-4 | 0.83–2.5 | 945 | ||
| 950 | 1300 (Belt) | 37 | Y225S-4 | 0.9–2.7 | 995 | ||
| 2BEA 203 | 33 mbar (−0.098 MPa) | 1120 | 970 (Direct) | 37 | Y250M-6 | 0.87–2.6 | 1065 |
| 880 | 790 (Belt) | 30 | Y200L-4 | 0.7–2.1 | 995 | ||
| 1000 | 880 (Belt) | 30 | Y200L-4 | 0.77–2.3 | 995 | ||
| 1270 | 1100 (Belt) | 45 | Y225M-4 | 0.97–2.9 | 1080 | ||
| 1320 | 1170 (Belt) | 45 | Y225M-4 | 1.03–3.1 | 1085 | ||
| 1400 | 1300 (Belt) | 55 | Y250M-4 | 1.1–3.4 | 1170 | ||
| 2BEA 252 | 33 mbar (−0.098 MPa) | 1700 | 740 (Direct) | 45 | Y280M-8 | 1.47–4.4 | 1693 |
| 1200 | 558 (Belt) | 30 | Y200L-4 | 1.1–3.3 | 1460 | ||
| 1500 | 660 (Belt) | 37 | Y225S-4 | 1.3–3.9 | 1515 | ||
| 1850 | 832 (Belt) | 55 | Y250M-4 | 1.63–4.9 | 1645 | ||
| 2000 | 885 (Belt) | 75 | Y280S-4 | 1.73–5.2 | 1805 | ||
| 2100 | 938 (Belt) | 75 | Y280S-4 | 1.8–5.5 | 1805 | ||
| 2BEA 253 | 33 mbar (−0.098 MPa) | 2450 | 740 (Direct) | 75 | Y315M-8 | 1.73–5.2 | 2215 |
| 1750 | 560 (Belt) | 45 | Y225M-4 | 1.3–3.9 | 1695 | ||
| 2140 | 660 (Belt) | 55 | Y250M-4 | 1.53–4.6 | 1785 | ||
| 2560 | 792 (Belt) | 75 | Y280S-4 | 1.62–5.0 | 1945 | ||
| 2700 | 833 (Belt) | 90 | Y280M-4 | 1.93–5.8 | 2055 | ||
| 2870 | 885 (Belt) | 90 | Y280M-4 | 2.06–6.2 | 2060 | ||
| 3020 | 938 (Belt) | 110 | Y315S-4 | 2.2–6.5 | 2295 | ||
| 2BEA 303 | 33 mbar (−0.098 MPa) | 4000 | 740 (Direct) | 110 | Y315L2-8 | 3.4–10.1 | 3200 |
| 3200 | 590 (Direct) | 75 | Y315L2-10 | 2.6–7.6 | 3200 | ||
| 2500 | 466 (Belt) | 55 | Y250M-4 | 2.1–6.1 | 2645 | ||
| 2800 | 521 (Belt) | 75 | Y280S-4 | 2.2–6.4 | 2805 | ||
| 3100 | 583 (Belt) | 75 | Y280S-4 | 2.3–6.8 | 2810 | ||
| 3580 | 657 (Belt) | 90 | Y280M-4 | 2.9–8.5 | 2925 | ||
| 4000 | 743 (Belt) | 132 | Y315M-4 | 3.2–9.5 | 3290 | ||
| 2BEA 353 | 33 mbar (−0.098 MPa) | 5300 | 590 (Direct) | 160 | Y355L2-10 | 4.3–12.5 | 4750 |
| 3580 | 390 (Belt) | 75 | Y280S-4 | 2.7–7.9 | 3560 | ||
| 3700 | 415 (Belt) | 90 | Y280M-4 | 3–8.9 | 3665 | ||
| 4100 | 464 (Belt) | 110 | Y315S-4 | 3.4–10 | 3905 | ||
| 4620 | 520 (Belt) | 132 | Y315M-4 | 3.6–10.6 | 4040 | ||
| 5200 | 585 (Belt) | 160 | Y315L1-4 | 3.8–11.2 | 4100 | ||
| 5850 | 660 (Belt) | 185 | Y315L2-4 | 4.8–14 | 4240 | ||
| 2BEA 355 | 160 mbar (−0.085 MPa) | 6200 | 590 (Direct) | 160 | Y355L2-10 | 5000 | |
| 4180 | 390 (Belt) | 90 | Y280M-4 | 3920 | |||
| 4600 | 435 (Belt) | 110 | Y315S-4 | 4150 | |||
| 4850 | 464 (Belt) | 110 | Y315S-4 | 4160 | |||
| 5450 | 520 (Belt) | 132 | Y315M-4 | 4290 | |||
| 5800 | 555 (Belt) | 132 | Y315M-4 | 4300 | |||
| 6100 | 585 (Belt) | 160 | Y315L1-4 | 4350 | |||
| 6350 | 620 (Belt) | 185 | Y315L2-4 | 4450 | |||
| 2BEA 403 | 33 mbar (−0.098 MPa) | 5160 | 330 (Belt) | 132 | Y315M-4 | 5860 | |
| 5700 | 372 (Belt) | 132 | Y315M-4 | 5870 | |||
| 6470 | 420 (Belt) | 160 | Y315L1-4 | 5950 | |||
| 7380 | 472 (Belt) | 200 | Y315L2-4 | 6190 | |||
| 8100 | 530 (Belt) | 250 | Y355M2-4 | 6630 | |||
| 8600 | 565 (Belt) | 280 | Y355L1-4 | — | |||