Datong Gearbox DC7J120TA Power Take off PTO 16/16
Product Description
Datong Gearbox DC7J120TA Power Take off PTO 16/16
Model list of power take-off
Model:FZ35/74 Control method: manual, pneumatic pneumatic control or mechanical manual cable control output cardan shaft or spline should be directly connected to the hydraulic pump（8Teeth DIN 5462） ACOPLE DIRECTO HYDRAULIC PUMP Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z35 Output tooth height:74mm Adaptive transmission Model: QL-ISUZUMSB-5M/5S/5SM LC5T25/28/88/255M3 ；MSB-5M/MSB-5S/MSB-5SM/LC5T88 LC5T25/LC5T255M3（24/63）/LC5T28 5T88 JCT528T8手动35/74 5MT1210FB |
Model:FZ51/63 Control method: manual, pneumatic Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z38 Output tooth height:63mm Adaptive transmission Model: QL-ISUZUMSB-5M/5S/5SM LC5T25/28/88/255M3 |
Model:FZ38/63 Control method: manual, pneumatic Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z38 Output tooth height:63mm Adaptive transmission Model:5G32A (0.794-5.595) |
Model:FZ39/67 Control method: manual, pneumatic Output method: outer ISO FLANGE CARDAN, or inner spline Number of output teeth Z39 Output tooth height:67mm Adaptive transmission Model: JMC JC5T28/5T26.5/MT1280JD JCT528T8 气动 |
Model:FZ32/65 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z32 Output tooth height:65mm Adaptive transmission Model: QL-ISUZU6MT1420/DN3-70030-E0/KN3 |
Model:FZ34/37 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z34 Output tooth height:37mm Adaptive transmission Model: WLY6G55/6G50 |
Model:FZ36/38 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z36 Output tooth height:38mm Adaptive transmission Model: ZF6S500/ZF6S600/ ZF6S558/ZF6S508/ZF6S458 |
Model:FZ31/47 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z31 Output tooth height:47mm Adaptive transmission Model: WLY5TS40B/5S100 |
Model:FZ31/40 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z31 Output tooth height:40mm Adaptive transmission Model: WLY6G40A/6G45 6G40A Ratio 6.143、0.79 |
Model:FZ31/42 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z31 Output tooth height:42mm Adaptive transmission Model:WLY6G40B Ratio 5.32 |
Model:FZ35/45 HWP-W35/45 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z35 Output tooth height:45mm Adaptive transmission Model:6GS42（6.182/0.783 ） WLY6GS46（ 6.182、0.783） 13.6KG/pc |
Model:FZ35/47 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z35 Output tooth height:47mm Adaptive transmission Model:6GS42B（5.333/0.791 ） |
Model:FZ25/67 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z25 Output tooth height:67mm Adaptive transmission Model: WLY6T55C/6S46/6S51/ 6T120/6T50 (6.158/0.768) |
Model:FZ25/71 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z25 Output tooth height:71mm Adaptive transmission Model: WLY6TS55B/6S46B、WLY653 |
Model:FZ45/40 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z45 Output tooth height:40mm Transmission Model: ZF5S408/ZF5S328/ZF5S400E、5S368 |
Model:FZ23/55 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z23 Output tooth height:55mm Adaptive transmission Model: WLY6S46/LC6T450 MTR645(ML645B1) |
Model:FZ31/63 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z31 Output tooth height:55mm Adaptive transmission Model: LC6T540B MT655(A2Q03/A2Q52) |
Model:17KW17/23 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z17,Z23 Output tooth height:44mm Adaptive transmission Model: DF6S900(90651 KW100) |
Model:17KW20/27 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z20,Z27 Output tooth height:44mm Adaptive transmission Model: DF6S900(90651 KW100) |
Model:17KD21/24 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z21,Z24 Output tooth height:42mm Adaptive transmission Model: DF6S900(90617 LD4001） |
Model:Datong 16/16 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z16,Z16 Output tooth height:65mm Adaptive transmission Model: DC7J120TA(B)01-00030 |
Model:Datong 17/17 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z17,Z17 Output tooth height:55mm Adaptive transmission Model: DC7J100TA(B)01-00030 17E46-00030/170010-KD85E1 |
Model:FZ38/42 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z38,Z22 Output tooth height:42mm Adaptive transmission Model:WLY8G45 |
Model:FZ36/40 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z36, Z22 Output tooth height:40mm Adaptive transmission Model:WLY8GS46,WLY8G46 |
Model:FZ41/44 Control method: manual, pneumatic Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z41, Output tooth height:44mm Adaptive transmission Model:ZF5S400V |
Model:FZ31/77 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z31, Output tooth height:77mm Adaptive transmissionModel:ISUZU -QL MLD-6Q/MLD6A |
Model:FZ24/59 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z24, Output tooth height:59mm Adaptive transmission Model: WLY6G120/6G70 |
Model:FZ34/65 Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z32 Output tooth height:65mm Adaptive transmission Model: MTR645(ML642A-A9) |
Model:QH650G Control method: pneumatic push Output method: outer disc ISO FLANGE CARDAN, or inner spline Number of output teeth Z29.Z19 Output speed ratio:0.57 Adaptive transmission Model: 9JS118/19/30--RT11509C |
FAW Jiefang power takeoff
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-YQ12/68 | 1.24 | 250 | CA6T-123/TS6-53 | Internal spline / flange | Pneumatics |
2 | SDQ-YQ12/72 | 1.199 | 250 | CA6T-123/TS6-53 | Internal spline / flange | Pneumatics |
3 | SDQ-YQ13/70 | 1.08 | 300 | CATS6-75A/1700940-680 | Internal spline / flange | Pneumatics |
4 | SDQ-YQ15/75 | 1.006 | 350 | CATS6-75(74）、 TZ1700940H4G、CA6T-138 | Internal spline / flange | Pneumatics |
5 | SDQ-YQ15/52 | 1.179 | 400 | CA6T138 | Internal spline / flange | Pneumatic (dynamic clutch) |
Dongfeng series power take off (DFAC)
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-DF21/33 | 1.044 | 250 | 17C-00030、17G0A4-08、 | Internal spline / flange | Pneumatics |
2 | SDQ-DF22/47 | 1.2 | 600 | Dt0690 overdrive | Internal spline / flange | Pneumatics |
3 | SDQ-DF22/47-A | 1.03 | 600 | Dt0690 overdrive | Internal spline / flange | Pneumatics |
4 | SDQ-DF24/42 | 1.2 | 600 | DF6S900 | Internal spline / flange | Pneumatics |
5 | SDQ-DF24/42-B | 1.03 | 450 | DF6S900 | Internal spline / flange | Pneumatics |
6 | SDQ-DF24/45 | 1.2 | 600 | DF6S900 | Internal spline / flange | Pneumatics |
7 | SDQ-DF24/45-B | 1.03 | 450 | DF6S900 | Internal spline / flange | Pneumatics |
8 | SDQ-DF24/65 | 1.06 | 400 | DF6S-750 | Internal spline / flange | Pneumatics |
9 | SDQ-DF24/64 | 1.06 | 400 | DF6S750/DF6S650 | Internal spline / flange | Pneumatics |
10 |
SDQ-DF24/69 |
1.211 |
350 | 17K1/17KT6K-00030、 17K17-00030/17G1A7-15、 17K23-00030/17G0A7-15 | Internal spline / flange | Pneumatics |
11 |
SDQ-DF25/63 |
1.23 |
350 | 17G1A7-41/17F40(44/62) /17g0a7-21 (41) / jiangft 650H | Internal spline / flange | Pneumatics |
12 |
SDQ-DF26/31 |
1.45 |
350 | DC6J70T/17G0A3-08(09/15/ 25/96）/Zqc6t-75 / 750 | Internal spline / flange | Pneumatics |
13 |
SDQ-DF27/21 |
1.845 |
350 | DC85JTZ/17G0Z56-010/17G 0A3-33(35/36)/17G0010-N9 002/14G0A3-32（34） /DC6J85TZ |
Internal spline / flange |
Pneumatics |
14 |
SDQ-DF27/53 |
1.35 |
350 | 17G0A9-Z67D/DC7J100TB/1 7G0A9-45(-24-00030) | Internal spline / flange | Pneumatics |
15 | SDQ-DF27/55 | 1.216 | 300 | 17g0a3-32 (33 / 34 / 35 / 36) straight Connecting gear / dc6j85tz (direct gear) | Internal spline / flange | Pneumatics |
16 | SDQ-DF27/65 | 1.07 | 350 | DC7J100TC、17G0A9-Z66D | Internal spline / flange | Pneumatics |
17 | SDQ-DF27/66 | 1.26 | 350 | Dc6j85tz (overdrive) /17G0A3-54/1700010-A9000 | Internal spline / flange | Pneumatics |
18 | SDQ-DF28/55 | 1.3 | 400 | 17GOA3-38/17N29-00030 | Internal spline / flange | Pneumatics |
19 | SDQ-DF28/65 | 1.55 | 350 | Dc7j120tb (overdrive) /01-00030 | Internal spline / flange | Pneumatics |
20 |
SDQ-DF28/72 |
1.84 |
350 | Dc7j120tc (direct gear) /01-00030 | Internal spline / flange | Pneumatics |
Jac Xingrui series power take off (JAC)
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-XR50/35 | 1 | 300 | LC6T55 WLY6TS55 | Internal spline / flange | Pneumatics |
2 | SDQ-XR50/45 | 1.1 | 280 | LC6T46/LC6T450 | Internal spline / flange | Pneumatics |
3 | SDQ-XR50/60 | 1.1435 | 300 | LC6T540 | Internal spline / flange | Pneumatics |
4 | SDQ-XR50/63 | 1.11 | 300 | LC6T540/15CO7027 | Internal spline / flange | Pneumatics |
5 | SDQ-XR50/65 | 1.6433 | 250 | ML642A-A9 | Internal spline / flange | Pneumatics |
6 | SDQ-XR50/67 | 1.1541 | 250 | ML532A | Internal spline / flange | Pneumatic / manual |
7 | SDQ-XR50/69 | 1.1 | 280 | LC6T46/LC6T450 | Internal spline / flange | Pneumatics |
8 | SDQ-XR50/71 | 1.17 | 200 | LC5T97/LC5T30 | Internal spline / flange | Pneumatics |
9 | SDQ-XR50/74 | 1.03 | 200 | LC5T35/LC5T40 | Internal spline / flange | Pneumatics |
10 | SDQ-XR23/55 | 1.12 | 300 | LC6T450M1 | Internal spline / flange | Pneumatic / manual |
11 | SDQ-XR37/77 | 1.55 | 200 | ML532C | Internal spline / flange | Pneumatic / manual |
Qingling Isuzu series power take off (Isuzu)
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-WS51/62 | 1.3 | 150 | Msb-5m / starray lc5t88 | Internal spline / flange | Pneumatics |
2 | SDQ-WS38/63 | 1 | 150 | Msb-5m / starray lc5t88 | Internal spline / flange | Pneumatic / manual |
3 | SDQ-WS32/64 | 1.095 | 300 | MYY-6S | Internal spline / flange | Pneumatic / manual |
4 |
SDQ-WS35/74 |
1.63 |
180 | MSB-5M/MSB-5S/MSB-5SM/LC5T88
LC5T25/LC5T255M3/LC5T28 |
Internal spline / flange | Pneumatic / manual vacuum |
5 | SDQ-WS52/77 | 1.18 | 250 | MLD-6Q/MLD6A | Internal spline / flange | Pneumatics |
JMC series power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-GT32/65 | 1.26 | 250 | 6MT1420/DN3-70030-E0/KN3 | Internal spline / flange | Pneumatic / manual |
2 | SDQ-GT51/67 | 1.2 | 200 | JC5T28/5T26.5/MTI280JD | Internal spline / flange | Pneumatic / manual |
3 | SDQ-GT32/65-A | 1.315 | 250 | 6MT1420/DN3-70030-E0/KN3 | Internal spline / flange | Pneumatic / manual |
4 | SDQ-GT32/65-B | 1.09 | 250 | 6MT1420/DN3-70030-E0/KN3 | Internal spline / flange | Pneumatic / manual |
5 | SDQ-GT32/65-C | 1.26 | 250 | 6MT1420/DN3-70030-E0/KN3 | Internal spline / flange | Pneumatic / manual |
ZF series power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-ZF51/38 | 1.077 | 300 | ZF6S500/ZF6S600/ZF6S558 ZF6S508/ZF6S458 | Internal spline / flange | Pneumatics |
2 | SDQ-ZF51/44 | 1 | 250 | ZF5S400 | Internal spline / flange | Manual |
3 | SDQ-ZF48/39 | 1.063 | 250 | ZF5S408/ZF5S328 | Internal spline / flange | Pneumatics |
4 | SDQ-ZF211/65 | 0.772 | 650 | TraXon12 | Internal spline / flange | Pneumatics |
Fast power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-FS212/70 | 0.94 | 600 | 12JSD160TA | Internal spline / flange | Pneumatics |
2 | SDQ-FS212/70-A | 0.78 | 600 | 12JSD160TA | Internal spline / flange | Pneumatics |
3 | SDQ-FS19/31 （QD40A） | 1.09 | 400 | 8JS75 | Internal spline | Pneumatics |
4 | SDQ-FS24/37 （ QCZ70A） | 0.93 | 600 | 6J80T | Internal spline / flange | Pneumatics |
5 | SDQ-FS211/60 | 1.1 | 350 | 6DS40TB-D/6DS60TB-D 6DS60TA-D | Internal spline / flange | Pneumatics |
6 |
SDQ-FS211/70 |
0.94 |
600 | Fuller / fast / rt-11509c 8JS100S/17G0A9-22 | Internal spline / flange | Pneumatics |
7 |
SDQ-FS211/70-A |
0.78 |
600 | Fuller / fast / rt-11509c 8JS100S/17G0A9-22 | Internal spline / flange | Pneumatics |
8 | SDQ-FS34/29 QD40J
| 400 | 8JS75 8js75tc
| Internal spline / flange | Pneumatics |
WanLiYang series power take off (wly)
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-WL24/37 | 1.176 | 250 | 10H30 | Internal spline / flange | Pneumatics |
2 | SDQ-WL24/38 | 1.077 | 300 | 6G55 | Internal spline / flange | Pneumatics |
3 | SDQ-WL24/40 | 1.333 | 300 | 6G40A | Internal spline / flange | Pneumatics |
4 | SDQ-WL31/39 | 1.1 | 300 | 6G40A | Internal spline / flange | Pneumatics |
5 | SDQ-WL24/43 | 1.087 | 300 | 5G40 | Internal spline / flange | Pneumatic / manual / vacuum |
6 | SDQ-WL24/44 | 1.043 | 300 | 6G40B | Internal spline / flange | Pneumatics |
7 | SDQ-WL24/59 | 1.094 | 300 | 6G120/6G70 | Internal spline / flange | Pneumatics |
8 | SDQ-WL24/60 | 1.3 | 300 | 6TS40 | Internal spline / flange | Pneumatics |
9 | SDQ-WL24/63 | 1.39 | 180 | 5TS32 | Internal spline / flange | Pneumatic / manual |
10 | SDQ-WL 24/63-B | 1.39 | 180 | 5G32A | Internal spline / flange | Pneumatic / manual |
11 | SDQ-WL 24/66 | 1.359 | 180 | 5TS32-C | Internal spline / flange | Pneumatic / manual |
12 | SDQ-WL 24/66-B | 1.146 | 180 | 5G32B/5G32C | Internal spline / flange | Pneumatic / manual |
13 | SDQ-WL 24/67 SDQ-WL 25/67 | 1.147 | 300 | 6T120/6S46/6S51 | Internal spline / flange | Pneumatics |
14 | SDQ-WL 24/70 | 1.15 | 200 | 6S46B (2015-4-25) | Internal spline / flange | Pneumatic / manual |
15 | SDQ-WL 24/71 SDQ-WL 25/71 | 1.11 | 300 | 6S51B/6S46B | Internal spline / flange | Pneumatic / manual |
16 | SDQ-WL 24/72 | 1.133 | 300 | 6TS55E/6TS60 | Internal spline / flange | Pneumatic / manual |
17 | SDQ-WL23/63 | 1.35 | 350 | 10H46 | Internal spline / flange | Pneumatics |
18 | SDQ-WL23/71 | 1.15 | 400 | 7TS60 | Internal spline / flange | Pneumatics |
19 | SDQ-WL24/75 | 1 | 400 | 7TS60B | Internal spline / flange | Pneumatics |
20 | SDQ-WL25/70 | 1.244 | 400 | 7TS60C | Internal flange / spline | Pneumatics |
21 | SDQ-WL24/73 | 1.07 | 400 | 7TS60D | Internal spline / flange | Pneumatics |
22 | SDQ-WL25/33 | 1.228 | 350 | 10h46 (right) | Internal spline / flange | Pneumatics |
23 | SDQ-WL27/70 | 1.08 | 150 | 5TS40 | Internal spline / flange | Pneumatics |
24 | SDQ-WL31/46 | 1.2 | 180 | 5TS40 | Internal spline / flange | Pneumatics |
25 | SDQ-WL211/100 | 1 | 1000 | 9G90 | Internal spline / flange | Pneumatics |
Heavy duty Sinotruck power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-ZD27/61 | 1.1 | 600 | DC7J120T | Flange flange | Pneumatic (dynamic clutch) |
2 | HW50 | 0.739 | 500 | HW14710/HW18710 HW15710/HW19710 | Internal flange / spline | Pneumatics |
3 | HW70 | 0.793 | 700 | HW18709/HW18710 | Internal spline / flange | |
4 | HW80Q-F301 | 800 | HW90510C1 | Flange flange | Pneumatics | |
5 | HW140Q-F301 | 0.84 | 1400 | HW12706 | Flange flange | Pneumatics |
6 | HW140Q-F302 | 0.84 | 1400 | HW12706 | Flange flange | Pneumatics |
7 | HW140Q-F303 | 0.84 | 1400 | HW12706 | Flange flange | Pneumatics |
8 | HW140Q-F305 | 0.84 | 1400 | HW12706 | Flange flange | Pneumatics |
9 | HW60Q-F300 | 0.686 | 600 | HW12706 | Flange flange | Pneumatics |
Other series of power take-off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-HL211/65 | 0.772 | 650 | Soda gearbox 12sob1500 | Internal spline / flange | Pneumatics |
2 | SDQ-HL211/100 | 1 | 1000 | Soda gearbox 12sob1500 | Internal spline / flange | Pneumatics |
3 | SDQ-NQ42/26 | 1.15 | 150 | NAC 2830.5 | Internal spline / flange | Pneumatics |
4 | SDQ-NQ42/27 | 1.15 | 150 | NAC 2830.5 | Internal spline / flange | Pneumatics |
5 | SDQ-SQ42/77 | 1.13 | 300 | SAIC sc50m6d | Internal spline / flange | Pneumatics |
New energy series power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | SDQ-LK31/38 | 1.043 | 300 | Suzhou green control 6s100 | Internal spline / flange | Pneumatics |
2 | SDQ-LK24/36 | 1.136 | 300 | Suzhou green control j6s95 | Internal spline / flange | Pneumatics |
3 | SDQ-LK20/56 | 1.148 | 300 | Suzhou green control j2s130 | Internal spline / flange | Pneumatics |
Export series power take off
Serial number | Model of power take-off | speed ratio | Output torque (N.m) | Matching gearbox | Output mode | control mode |
1 | Pto1000 series | 0.6- 1.88 | 300 | EATON FS 3005/4005 EATON 6305 | Internal flange / spline | Pneumatics |
2 |
Pto2000 series |
0.6- 1.88 |
350 | Eaton fuller Eaton rt-11109a / rt-6609a rt-7608a Allison Ellison M-5600/M-6600/S-5600 S-6600 |
Internal spline / flange |
Pneumatics |
3 | 3131（BZ） | 0.84-2.9 4 | 450 | Allison Ellison MD-3000/MD-4000 | Internal spline / flange | Hydraulic (dynamic clutch) |
4 | 3252（BZ） | 0.81-1.8 5 |
300 | Allison Ellison MD-3000/MD-4000 | Internal spline / flange | Hydraulic (dynamic clutch) |
5 | 3151（BZ） |
0.84-2 |
540 | Allison Ellison MD-3000/MD-4000 | Internal spline / flange | Constant mesh |
6 |
3300 |
0.74-1 |
390 | Allison Ellison MD-1000/MD-2000 | Internal spline / flange | Hydraulic (dynamic clutch) |
7 | PTO852 | 1.13 | 650 | Allison | Internal spline / flange | Hydraulic (dynamic clutch) |
8 |
103K_03（BZ） |
0.77-0.55 |
650 | ZF ZF S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |
9 |
1010K_03 (BZ) |
0.76 |
420 | ZF ZF S5-50/90 S6-65/66/70/75/80/90 6S-800/1000/1005/1200 |
Flange flange |
Pneumatics |