Customize FAW Highway Guardrail Repair Vehicle with Drilling Machine and Air compressor & Attenuator TMA
Product Description
Customize FAW Highway Guardrail Repair Vehicle with Drilling Machine and Air compressor & Attenuator TMA
Special device :Highway Guardrail Drilling Machine vibro machine piling machine
Driving, pulling and drilling the guardrail repair
Guardrail repair:Guardrail Installation & Removal
Product model | DNJJ5101TQX6 |
Chassis model | FAW CA1110P40K59L3BE6A84 |
Curb weight | 9355kg |
Maximum total mass | 9550kg |
Rated power | 118kw |
Overall dimensions of vehicle | 7520×2250×3110mm |
System working pressure | 16 Mpa |
Hydraulic hammer model | YC230/260 |
Pile pulling force | 96.5KN |
Hydraulic hammer working height | 700-2700 mm |
Special functions and devices: the special device of the car is: guardrail repair device, anti-collision buffer device, mainly used for high-grade highway anti-collision guardrail piling, pulling pile, maintenance of the left and right side guardrail, anti-collision buffer device is mainly to avoid the rush repair operation, the rear vehicle rear-end of the repair vehicle caused by the repair personnel casualties;
Highway Fence Collision Barrier Repair Vehicle for Guardrail Maintenance Highroad Guardrail Repair Vehicle
Main technical parameters :
Model | DNJJ5101TQX6 | |
Scope of work | Used for maintenance of corrugated beam steel guardrail of express way | |
Number of passengers | 3 | |
Maximum speed | 95km/h | |
Fuel | Diesel | |
Hydraulic oil | 65 #anti-wear hydraulic oil | |
Chassis | Chassis:Jiefang FAW brand, Class II chassis, model: CA1110P40K59L3BE6A84; with air-conditioning,steering power, ABS | |
Wheel track | Track: 1726mm/1800mm Tire size: 8.25 R16 18PR | |
Engine Model,form, power,fuel consumption,manufacturer | Engine model: WP3NQ160E61 Type:In-line four-cylinder,supercharged and intercooled Rated power: 118KW Displacement: 2970ml Emission standard: E3-6 Manufacturer: Beiqi Foton | |
Driving and braking | Drive mode: rear axle drive Braking type: pneumatic drum type | |
Overall dimension (L X W X H) | 7520mmx2250mmx3110mm | |
Front/rear overhang | 1155/2465mm | |
Wheelbase | 3900mm | |
Maximum gross weight, curb weight | Maximum total weight: 9550 kg Curb weight: 9355kg | |
Driving mode of working device | Hydraulic drive | |
Special Uninstall Set | Turning radius | 2100mm |
Side distance adjustment | 360mm | |
System operating NYARRIIYA | 16MPa | |
Hydraulic Hammer | YC260 | |
Impact frequency: 6.67-13.33Hz Hydraulic system flow: 50-90L/min Working pressure: 12-15 MPa Minimum starting pressure: ≤ 8 MPa Working height: 700- 2700mm Pile pulling force: 96.5KN Operating mass: 260 kg | ||
Basic function and configuration table :
Seria | Project | Description |
1 | Car Chassis | FAW Jiefang CA1110P40K59L3BE6A84 Class II Chassis |
2 | Special pile driver and extractor device | A damaged guardrail column is pulled out in a full hydraulic mode, and a new column to be replaced is driven in, the working device can rotate 270 degrees,a central divider and a left and right roadside guardrail are driven without turning around and retrograde, a hydraul ic pile pulling mechanism is arranged,the occupied road surface area is small, and all the maintenance and construction work of the anti-collision guardrail can be completed by one emergency repair vehicle. The equipment has the advantages of simple operation,convenient maintenance, good reliability and strong safety. The whole vehicle meets the requirements of highway driving. |
3 | Pile pulling mechanism | It is equipped with Φ120 and Φ150 special wafer type circular pile extractor,which can automatically lock the pile through the change of pile angle during pile extraction. There is a hydraulic support mechanism at the bottom of the guide rail, which absorbs all the pile pulling force and will not cause damage to the body. |
4 | Special drilling device | Air compressor model: KSC-550/14.5 Nominal volume flow: 15m 3/min Rated speed: 2200r/min Exhaust pressure: 1.45 Mpa Driving power:140kw Weight of complete machine: 1850 kg |
Drill bit: alloy steel drill bit. | ||
Drilling diameter: 120mm-150mm Drilling depth: 17 00 mm | ||
Operating system; Wireless remote controller is installed. The special device can be remotely control led to avoid the harm to human body caused by dust when drilling. | ||
5 | Hydraulic system | Hydraulic outrigger In order to improve the stability of the vehicle, four hydraulic support wheels are equipped on both sides of the vehicle to avoid damage to the vehicle during operation. |
Hydraulic Motor A low speed high torque hydraulic motor is adopted. The main sals and key components are imported from Italy and Germany,and the power is lasting, stable and reliable. The sealing performance is good, no leakage phenomenon, the volume ratio can reach 0.98, and the maximum bearing pressure can reach 20 MPa. Model: JHM6-800D40 Displacement: 775ml/R Rated pressure 16 MPa Maximum pressure: 20 MPa Overall efficiency: 95% | ||
Hydraulic pump The duplex hydraulic pump produced by Hefei Changyuan Hydraulic Parts Co.,Ltd., which was designated by the former Ministry of Machinery, is used.Rated pressure: 20 MPa Rated speed: 600-2500 R/min Displacement: 40/50ml/R | ||
Multi-way reversing valve The original imported nine-link electric control integrated multi-way reversing valve is adopted. Working pressure 16 MPa Flow: 63 L/min | ||
Center joint The main function is the hydraulic oil pipe transition joint of the vehicle hydraulic system. The use of the central rotary joint can solve the 270°rotary work of the upper working device and ensure the reliability and suitability of the hydraulic system. | ||
Hydraulic Hammer YC series hydraulic hammers produced by Changzhi Hydraulic Parts Co.,Ltd.,the best manufacturer of hydraulic ic hammers in China, are selected, which have good reliability and long service life. | ||
Cooling system of hydraulic system reduce the temperature of hydraulic oil and ensure the working efficiency of hydraulic parts | ||
6 | Warning lamps | It is equipped with warning lamps such as night working lights, arrow lights and strobe lights to improve the warning effect of vehicles and ensure the safety of night operation. |
7 | Safety device(Optional) | 7.1 Anti-collision cushion with integrated single-section design and rectangular anti-collision cushion design. The shell is made of a light aluminum alloy material, and an aluminum alloy film honeycomb energy-absorbing material is filled in the middle of the shell. 7.2 Cushion bag: L1530 X W2030 X H550 mm 7.3 The anti-collision cushion adopts a hydraulic system driven by direct current, and is lifted by two hydraul ic cylinders. The lifting operation can be carried out by remote control without stopping during driving. 7.4 A total of four inner arc aluminum tube structures are installed outside.When a collision occurs, the arc aluminum tube wilI be deformed first to absorb the impact energy.When the energy overcomes the deformation rate of the aluminum tube, the aluminum tube bends inward, and then the crash cushion continues to absorb the remaining energy.The aluminium alloy film honeycomb material used in the buffer pad can generate controllable deformation so as to effectively absorb collision energy. |
This product has the functions of piling, pile pulling and drilling for the collision guardrail of high grade highway, and it can turn 270 degrees left and right rotating, and left and right side construction does not need to turn around, etc. It is integrated with piling and pile pulling, and it can be loaded with working materials, with good reliability, easy to operate, easy to maintain, no need to go against the flow, with high safety, high working efficiency, low labour intensity, and economical and practical. The main components of the equipment for the FAW Jiefang chassis, 15 cubic air compressor, full hydraulic drilling rotary head, anti-collision buffer device, structural components and hydraulic, electric control system and other parts of the composition of the control mode can be used according to customer requirements of the full manual or hand-electricity plus wireless remote control to achieve the construction operation, in order to facilitate the dismantling of the bolts on the guardrail plate can be added on the equipment of the pneumatic boarder and the pneumatic pickaxe air interface, simple operation, easy maintenance, good reliability, safety, work efficiency, labour, economic. Simple operation, easy maintenance, good reliability, strong security, while greatly reducing labour intensity, improve the quality and speed of highway guardrail maintenance, is the most ideal product for highway guardrail maintenance.
Customize DFAC/FAW/SHACMAN/SINOTRUCK HOWO/JAC /ISUZU/JMC
Keystone Vessel Industrial Gas Cylinders| ISO Tank|Pressure Vessel| UN Portable Tanks- Dong Runze Special Vehicle
Keystone Vessel Manufacturing Co., Ltd