XLZ2103 Road mix pavement cold recycler
Product Description
pavement cold regenerating machine XCMG XLZ2303
XLZ2303 pavement cold regenerating machine is applied with the configuration of the imported Phase III Cummins engine (600HP), with the maximum milling depth (400mm) and milling width (2300mm), this equipment is suitable to the asphalt layer of which the operating condition is 5-6cm surface course, the basic level is the 20cm structure of lime-ash gravel, the regeneration construction of the medium county road, and the regeneration construction of partial national or provincial highway.
Job parameters | |
---|---|
Mixing and milling width (mm) | 2100 |
Maximum milling and mixing depth (mm) | 0-400 |
Milling and mixing rotor | |
Tool number (piece) | 162 |
Milling wheel diameter (cutter) (mm) | 1350 |
Diesel engine | |
Factory | Weichai power company limited |
Model | WP12.460N |
Rated power (kW) | 338 |
Engine speed (RPM) | 1900 |
Speed/climbing ability | |
Working speed (km/h) | 0-2.7 |
Travel speed (km/h) | 0-18.5 |
Theoretical climbing ability (out) (%) | 20 |
Ground clearance (mm) | 350 |
Weight | |
Operating weight (kg) | 23500 |
Cabinet volume | |
Fuel tank (l) | 650 |
Hydraulic tank (l) | 380 |
Water tank (l) | 1000 |
Shipping dimensions | |
Machinery (length x width x height) (mmxmmxmm) | 9232x3142x3450 |
onther Model
optional list
model | ZG3065-9/ZG3065-9B |
Specifications | |
Operating weight | 5800kg |
Standard bucket capacity | 0.22m³ |
Arm length | 1600mm |
Boom length | 3000mm |
Engine | |
Model | Yanmar 4TNV98-SYU |
Type | cylinders-vertical type-water cooling-4 strokes |
Power | 43.4kW |
Max.torque | 254N.m |
No.of cylinders | 4 |
Displacement | 3.319L |
Hydraulic system | |
Main pump | Rexroth/ Doosan |
Type | Variable displacement axial piston pumps |
Max.displacement | 156L/min / 170L/min |
Working pressure | 24.5Mpa / 22Mpa |
Hydraulic motor | Jesung |
Swing | Fixed displacement axial piston motor |
Trave | Variale displacement axial piton motors |
Performance | |
Swing speed | 11r/min / 10r/min |
Max. travel speed H/L | 0~2.3/0~4.3km/h |
Gradeability | 30° |
Max. digging force of bucket | 40kN |
Max.digging force of arm | 25kN |
Ground pressure | 33kPa |
Tank capacity | |
Fuel tank capcity | 120L |
Hydraulic tank capacity | 90L |
model | ZG3085-9 |
Specifications | |
Operating weight | 8100kg |
Standard bucket capacity | 0.37m³ |
Arm length | 1730mm |
Boom length | 3904mm |
Engine | |
Model | Yanmar 4TNV98T-SFN |
Type | Vertical type-4 strokes-water cooling-direct injection-turbo charge |
Power | 53.1kW a |
Max.torque | 286.9~312.7N.m |
No.of cylinders | 4 |
Displacement | 3.319L |
Hydraulic system | |
Main pump | |
Type | Variable displacement axial piston pumps |
Max.displacement | 90ml |
Working pressure | 27.5Mpa |
Hydraulic motor | |
Swing | Fixed displacement axial piston motor |
Trave | Variale displacement axial piton motors |
Performance | |
Swing speed | 12 |
Max. travel speed H/L | 4.5~2.5km/h |
Gradeability | 30° |
Max. digging force of bucket | 53kN |
Max.digging force of arm | 44kN |
Ground pressure | 37kPa |
Tank capacity | |
Fuel tank capcity | 138L |
Hydraulic tank capacity | 95L |
model | ZG3150-9C |
Specifications | |
Operating weight | 14000kg |
Standard bucket capacity | 0.6m³ |
Arm length | 2500mm |
Boom length | 4600mm |
Engine | |
Model | CUMMINS B3.9-C |
Type | Turbo-charged with inter-cooled |
Power | 86kW |
Max.torque | 486N.m |
No.of cylinders | 4 |
Displacement | 3.9L |
Hydraulic system | |
Main pump | |
Type | Variable displacement axial piston pumps |
Max.displacement | 2x58cc/rev |
Max. Flow Rate | 2x120L/min |
Working pressure | 30Mpa |
Hydraulic motor | |
Swing | Fixed displacement axial piston motor |
Trave | Variale displacement axial piton motors |
Performance | |
Swing speed | 13.7r/min |
Max. travel speed H/L | 3.1km/h |
Gradeability | 30° |
Max. digging force of bucket | 77kN |
Max.digging force of arm | 61.8kN |
Ground pressure | 39kPa |
Tank capacity | |
Fuel tank capcity | 250L |
Hydraulic tank capacity | 200L |
model | ZG3210-9/ZG3210-9C |
Specifications | |
Operating weight | 21000kg |
Standard bucket capacity | 0.91m³ |
Arm length | 2910mm |
Boom length | 5680mm |
Engine | |
Model | CUMMINS 6BTAA5.9-C150 |
Type | Turbo-charged with inter-cooled |
Power | 112kW/1950rpm |
Max.torque | 614N.m at 1500rpm |
No.of cylinders | 6 |
Displacement | 5883cc |
Hydraulic system | |
Main pump | |
Type | Variable displacement axial piston pumps |
Max.displacement | 2x108cc/rev C(C TYPE) 2x111cc/rev |
Max. Flow Rate | 2x211L/min C(C TYPE) 2x218L/min |
Working pressure | 31.4/34.3Mpa C(C TYPE) 31.4/34.3Mpa |
Hydraulic motor | |
Swing | Fixed displacement axial piston motor |
Trave | Variale displacement axial piton motors |
Performance | |
Swing speed | 12.4rpm C(C TYPE) 12.0rpm |
Max. travel speed H/L | 5.4/3.0km/h |
Gradeability | 35° |
Max. digging force of bucket | 137kN |
Max.digging force of arm | 102kN |
Ground pressure | 47kPa |
Tank capacity | |
Fuel tank capcity | 400L |
Hydraulic tank capacity | 210L |
model | ZG3225LC-9/ZG3225LC-9C |
Specifications | |
Operating weight | 22000kg |
Standard bucket capacity | 1.0m³ |
Arm length | 2910mm |
Boom length | 5680mm |
Engine | |
Model | CUMMINS 6BTAA5.9-C150 |
Type | Turbo-charged with inter-cooled |
Power | 112kW/1950rpm |
Max.torque | 614N.m at 1500rpm |
No.of cylinders | 6 |
Displacement | 5883cc |
Hydraulic system | |
Main pump | |
Type | Variable displacement axial piston pumps |
Max.displacement | 2x108cc/rev C(C TYPE) 2x112cc/rev |
Max. Flow Rate | 2x211L/min C(C TYPE) 2x218L/min |
Working pressure | 31.4/34.3Mpa C(C TYPE) 31.4/34.3Mpa |
Hydraulic motor | |
Swing | Fixed displacement axial piston motor |
Trave | Variale displacement axial piton motors |
Performance | |
Swing speed | 10.6rpm C(C TYPE) 12.0rpm |
Max. travel speed H/L | 5.4/3.0km/h |
Gradeability | 35° |
Max. digging force of bucket | 137kN |
Max.digging force of arm | 102kN |
Ground pressure | 45kPa |
Tank capacity | |
Fuel tank capcity | 400L |
Hydraulic tank capacity | 210L |
model | ZG3235-9/ZG3235-9C |
Specifications | |
Operating weight | 23000kg |
Standard bucket capacity | 1.1m³ |
Arm length | 3050mm |
Boom length | 5850mm |
Engine | |
Model | CUMMINS 6BTAA5.9-C178 |
Type | Turbo-charged with inter-cooled |
Power | 133kW/2000rpm |
Max.torque | 708N.m at 1500rpm |
No.of cylinders | 6 |
Displacement | 5883cc |
Hydraulic system | |
Main pump | |
Type | Variable displacement axial piston pumps |
Max.displacement | 2x112cc/rev C(C TYPE) 2x115cc/rev |
Max. Flow Rate | 2x218L/min C(C TYPE) 2x224L/min |
Working pressure | 31.4/34.3Mpa C(C TYPE) 32.3/34.3Mpa |
Hydraulic motor | |
Swing | Fixed displacement axial piston motor |
Trave | Variable displacement axial piton motors |
Performance | |
Swing speed | 11.3rpm C(C TYPE) 10.5rpm |
Max. travel speed H/L | 5.6/3.1km/h |
Gradeability | 35° |
Max. digging force of bucket | 162kN |
Max.digging force of arm | 123kN |
Ground pressure | 50kPa |
Tank capacity | |
Fuel tank capcity | 400L |
Hydraulic tank capacity | 210L |
model | ZG3255LC-9/ZG3255LC-9C |
Specifications | |
Operating weight | 25000kg |
Standard bucket capacity | 1.2m³ |
Arm length | 3050mm |
Boom length | 5850mm |
Engine | |
Model | CUMMINS 6BTAA5.9-C178 |
Type | Turbo-charged with inter-cooled |
Power | 135kW/2000rpm |
Max.torque | 708N.m at 1500rpm |
No.of cylinders | 6 |
Displacement | 5883cc |
Hydraulic system | |
Main pump | |
Type | Variable displacement axial piston pumps |
Max.displacement | 2x112cc/rev C(C TYPE) 2x115cc/rev |
Working pressure | 31.4/34.3Mpa C(C TYPE) 32.3/34.3Mpa |
Hydraulic motor | |
Swing | Fixed displacement axial piston motor |
Trave | Variable displacement axial piton motors |
Performance | |
Swing speed | 11.3rpm C(C TYPE) 10.5rpm |
Max. travel speed H/L | 5.6/3.1km/h |
Gradeability | 35° |
Max. digging force of bucket | 162kN |
Max.digging force of arm | 123kN |
Ground pressure | 45kPa |
Tank capacity | |
Fuel tank capcity | 400L |
Hydraulic tank capacity | 210L |
model | ZG3465LC-9C |
Specifications | |
Operating weight | 47300kg |
Standard bucket capacity | 2.25m³ |
Arm length | 3050mm |
Boom length | 5850mm |
Engine | |
Model | CUMMINS QSM11-C375 |
Type | Turbo-charged with inter-cooled |
Power | 375(280)kW/2000rpm |
Max.torque | 1898N.m at 1400rpm |
No.of cylinders | 6 |
Displacement | 10800cc |
Hydraulic system | |
Main pump | |
Type | Variable displacement axial piston pumps |
Max.displacement | 200cc/rev×2 |
Working pressure | 32.3/34.3Mpa |
Hydraulic motor | |
Swing | Fixed displacement axial piston motor |
Trave | Variable displacement axial piton motors |
Performance | |
Swing speed | 8.6rpm |
Max. travel speed H/L | 5.4/3.2km/h |
Gradeability | 35° |
Max. digging force of bucket | 290kN |
Max.digging force of arm | 228kN |
Ground pressure | 0.8kgf/cm² |
Tank capacity | |
Fuel tank capcity | 680L |
Hydraulic tank capacity | 380L |
Package-Shipping
Packaging & Shipping