Sewer Jetting Truck Septic Tank with jetting water tank body

Tankdimensions(diameter*L)

mm

Customization 

Rated Load

 L

Customization 

Net weight

kg

Customization 

Tank Structure

cabon steel 6mm Fully welded, Shell and Baffles

 1 x Manholes on top

  8” Discharge pipe

TANK

Tank is manufactured from thick sheet steel. Front end is covered with convex and dished plate and welded to the body both inside-outside.

There are baffle plates made from thick sheet steel and mounted inside the body on the reinforcing rings

TAILGATE

Full diameter tailgate is manufactured from thick convex plate with a fully flat steel ring welded around it to provide gasget face.

Tailgate is connected to the body with top hinges with bronze bushings. Tailgate is opened upwards by a hydraulic cylinder. There are four tightening handle around the tailgate to provide efficient sealing.

Inspection Fluid Level

Standard 2” Plexiglass, or Optional 4 Individual Viewing Plexiglass Windows

Hydraulic cylinder

1 hydraulic cylinder for tipping the tank at front.

2 hydraulic cylinder for opend the rear dish door,

SUBFRAME

There is a subframe is made from U profiles made from steel and is mounted to the chassis with mounting plates and regarding the technical procedures.

paint

Painted as customer need