ISUZU Potable Water Service Vehicles

  Aircraft Potable Water tanker

Potable Water Vehicle consists of a suitable chassis, a stainless steel tank and drinking water supply system. It is strongly built to withstand the airport environ-ment, simple to operate and easy to maintain. The tank is mounted to the chassis with rubber shock absorbers to insulate it from vibration and shock impact during driving. 

Potable Water Service truck is designed to withstand the airport complex environment, simply to operated and easy to maintain The Truck with closed cab and heating systems is equipped with latest electric and hydraulic circuits. The unit is equipped with a lift platform in the rear and can be servicing up to B747. The tank is mounted to the chassis with rubber shock absorbers to insulate it from vibration and shock during driving.
Portable Water Service Truck 5040GQS 

Overall Dimensions (LxWxH): 6475x2100x2220mm
Chassis Type and Engine: ISUZU 4JB1-TC1
Water Tank Capacity: 2900L
Ground Clearance: 340mm
Lift platform rising range: 400-2800mm
Shipping Weight: 3500kg 

   Lavatory Service Vehicle is designed to remove the waste from the Air-craft Lavatory and to provide clean water for flushing and refilling. This unit consists of a suitable chassis, stainless steel waste tank, water tank and a clean water supply and waste system, can be used to service narrow body and wide body commercial aircraft. It is strongly built to withstand the airport environment, simple to operate and easy to main-tain. The tank is mounted to the chassis with rubber shock absorbers to insulate it from vibration and shock during driving. See chart for tank capacities. 

Overall Dimensions (LxWxH): 6475x2100x2220mm
Chassis Type and Engine: ISUZU 4JB1-TC1
Tank Capacity: 2900L
Waste Water Tank capacity: 1930L
Clean Water Tank Capacity: 970L
Ground Clearance: 340mm
Shipping Weight: 3600kg 

 Lavatory service truck  withstand the airport complex environment, simply to operated and easy to maintain The Lavatory servicing Truck with closed cab and heating systems is equipped with latest electric and hydraulic circuits. The unit is equipped with a lift platform in the rear and used and servicing up to B747. The tank is mounted to the chassis with rubber shock absorbers to insulate it from vibration and shock during driving. 

ISUZU WGKT44, WGKT54 and WGKT58 passenger step vehicles

ISUZU WGKT44, WGKT54 and WGKT58 passenger step vehicles 

WGKT44, WGKT54 and WGKT58 passenger step vehicles are used to embark and disembark passengers from the aircraft. These units are highly stable due to the use of front and rear stabilizers. Advanced hydraulic technology and components are utilized to provide reliable performance and easy maintenance. All required safety protection and emergency operation devices are included on this unit. Platform height is indicated to assist in positioning the steps. The platform is designed for easy and convenient posi-tioning at the doorsill. Safety devices installed on the platform assure that there is no damage to the aircraft. Where ever possible stainless steel has been utilized in the con-struction to maintain a good appearance over a long time. 

 

Due to technical progress, the specification may be changed without prior notice.

Any requirement, please contact us for detailed information.