Emergency Shutoff Valves for Road Tanker
Technical Data Sheet
ESVs manual type
HDV-100
Parameter :
Size | 4" |
Flow | 2500L/min |
Working pressure | 0.6MPA |
operate way | pneumatic |
Temperature | -20 to 70 ℃ |
Connect way | flange |
Medium | oil |
HDV-100QS
Size | 4" |
Flow | 2500L/min |
Working pressure | 0.6MPA |
operate way | pneumatic |
Temperature | -20 to 70 ℃ |
Connect way | flange |
Medium | oil |
HDV-100TQ
Size | 4" |
Flow | 2500L/min |
Working pressure | 0.6MPA |
operate way | pneumatic |
Temperature | -20 to 70 ℃ |
Connect way | flange |
Medium | oil |
HDV-100Q
Size | 4" |
Flow | 2500L/min |
Working pressure | 0.6MPA |
operate way | pneumatic |
Temperature | -20 to 70 ℃ |
Connect way | flange |
Medium | oil |
HDV-80NQ
Size | 3" |
Flow | 1500L/min |
Working pressure | 0.6MPA |
operate way | pneumatic |
Temperature | -20 to 70 ℃ |
Connect way | flange |
Medium | oil |
HDV-100PQ
Size | 4" |
Flow | 2500L/min |
Working pressure | 0.6MPA |
operate way | pneumatic |
Temperature | -20 to 70 ℃ |
Connect way | flange |
Medium | oil |
SDHDV-100
Size | 4" |
Flow | 2500L/min |
Working pressure | 0.6MPA |
operate way | manual |
Temperature | -20 to 70 ℃ |
Connect way | flange |
Medium | oil |
HDV-100S
Size | 4" |
Flow | 2500L/min |
Working pressure | 0.6MPA |
operate way | manual |
Temperature | -20 to 70 ℃ |
Connect way | flange |
Medium | oil |
HDV-80S
Size | 3" |
Flow | 1500L/min |
Working pressure | 0.6MPA |
operate way | manual |
Temperature | -20 to 70 ℃ |
Connect way | flange |
Medium | oil |
HDV-100PS
Size | 4" |
Flow | 2500L/min |
Working pressure | 0.6MPA |
operate way | manual |
Temperature | -20 to 70 ℃ |
Connect way | flange |
Medium | oil |
Product Description
Emergency shutoff valves for road tanker
A system using Emergency Shut-Off Valves will not prevent some
spillage of liquid and vapor, but the total system should be constructed
so this spillage will be kept to a minimum.
YOJE HDV series emergency valve is installed at the bottom of tanker to connect with flange.
It has efficient design and realize the high flow speed,high fall head in the liquid pipe.
For that,it get the best profit. It can use manual and pneumatic controller to open the bottom valve.
The casting body is design to decease the weight and improve the fluidity.
Feature:
Improve the flow speed and adopt the easy,convenient structure
Easy install,can automatically cut off in emergency
Use the manual controller to open
Fit EN 13083 and flange TTMA
Material:
Body: SS
Shaft: SS
Seal: PTFE
Spring: SS