Customize High Pressure Suck and Blow Vacuum Loader For Dry Substances 24m3

G.W.

31000(Kg)

N.W.

20060(Kg) 

21550(Kg)

Rated load

10745,10810(Kg) 

9320,9255(Kg)

Approach Angle/Departure Angle:

17/10/11 12 (°)

Front/rear overhang:

1500/2855,1480/2855,1500/2550,1480/2550(mm)

1500/2995(mm)

Axle Load:

6500/6500/18000 (Two axes)

Wheelbase:

1995+2855+1350,1995+3200+1350,1995+3800+1350,1995+4600+1350(mm)

Number of shafts:

4

Maximum speed:

89,98(km/h)

Number of tires:

12(PCS)

Tire Specifications:

295/80R22.5 18PR,11.00R20 18PR,295/60R22.5 18PR,315/60R22.5 20PR,315/60R22.5 18PR

Fuel consumption:

(L/100Km)

Number of spring pieces:

3/3/10

Front wheel base:

2010/2010,2030/2030(mm)

Rear wheel base:

1860/1860,1880/1880(mm)

Engine type

Engine manufacturer

Volume (ml)

Power (kw)

DDi75E300-60; DDi75E350-60; DDi75E340-60

Dongfeng Commercial Vehicle Co., LTD.;

7500; 7500; 7500

220; 257; 250

   A: High Pressure Suck and Blow Vacuum Supersucker For Powdered graphite

1.  Equipped with tank body, air compressor, vacuum pump, lift cylinder and other special devices, through the vacuum pump to produce negative pressure, vacuum closed suction and loading of secondary pollutants, and through the dust removal filter system to dust the mixed air of pollutants, and then through the air compressor to produce positive pressure to discharge secondary pollutants through the closed high pressure discharge into the special storage container. The top closure cannot be slotted, and the rear cannot be opened. 

2.    Total capacity of the tank is 25 cubic meters, the effective volume of the tank is 23.8 cubic meters. Tank size: Diameter × length (mm)2400×6400. 

3.   Transport medium: powdered graphite, density :450 kg/m3. The materials used for side protection and rear protection are Q235A, the side protection is bolted to the vehicle, the rear protection is welded and fixed to the vehicle, the rear protection section size is (mm):140×80, and the height from the ground is 455mm.

4. Wheelbase (mm)  :1995+4600+1350.

5. Equipped with ABS,ABS

6. Optional speed limiting device, speed limit of 89km/h.

7. Optional cab with chassis. The rear part is equipped with different specifications of suction pipe, locking device, pipeline valve, and external air source interface. The rear part is equipped with different pipeline layout.

   
   

    B :Vacuum Supersucker For High Pressure Suck and Blow soot powder

   
   

1. total capacity of the tank body is 24.2 cubic meters, the effective volume of the tank body is 23.1 cubic meters, the external dimension of the tank body: the length of the tank is 6511mm(including the head), the diameter is 2412mm,

2. Transportation medium is soot powder, and the density is 0.40 tons/cubic meter.

3. The material of the side protective device is T6063T6 and is connected by bolts. The material of the rear protective device is Q345B and is connected by bolts. The cross-section size is 135mm x 70mm, and the height from the ground is 495mm.

4. . Optional cab appearance with chassis. The car is equipped with a travel recorder with satellite positioning function.  installed speed limit device, speed limit 89km/ H.BS Manufacturer: East Knorr Commercial Vehicle Brake System (Shiyan) Co., LTD., model :3631010-C2000.

5. Engine DDi75E350-60 net power of 252kw, engine DDi75E300-60 net power of 215kw.

6. Equipped with tank body, vacuum pump, air compressor, lifting cylinder and other special devices, through the vacuum pump to produce negative pressure for the powder material vacuum suction loading, after the tank is lifted by the air compressor positive pressure discharge.