CATERPILLAR 323D2L Excavator
Product Description
Specifications
Engine Model | Cat® C7.1 |
Net Flywheel Power | 110.0 kW |
Bore | 105.0 mm |
Stroke | 135.0 mm |
Displacement | 7.01 L |
Engine Power – ISO 14396 | 117.0 kW |
Net Power – SAE J1349/ISO 9249 | 110.0 kW |
Note | The Cat C7.1 meets exhaust emissions equivalent to Tier 3 and Stage III emission standards. |
WEIGHTS
Maximum Frontless Weight | 16800.0 kg |
Maximum Operating Weight* | 23200.0 kg |
Note | *Dependent on application, Review |
SERVICE REFILL CAPACITIES
Fuel Tank Capacity | 410.0 L |
Cooling System | 25.0 L |
Engine Oil | 18.0 L |
Swing Drive | 8.0 L |
Final Drive (each) | 10.0 L |
Hydraulic System (including tank) | 260.0 L |
Hydraulic Tank | 120.0 L |
SWING MECHANISM
Swing Speed | 10.5 rpm |
Swing Torque | 61.8 kN·m |
DRIVE
Maximum Travel Speed | 5.6 km/h |
Drawbar Pull | 205.0 kN |
HYDRAULIC SYSTEM
Pilot System – Maximum Flow | 23.1 L/min |
Pilot System – Maximum Pressure | 3920.0 kPa |
Main System – Maximum Flow at Operation | 202×2 L/min (53.4×2 gal/min) |
Main System – Maximum Flow at Travel | 214×2 L/min (56.5×2 gal/min) |
Maximum Pressure – Equipment | 35000.0 kPa |
Maximum Pressure – Swing | 25000.0 kPa |
Maximum Pressure – Travel | 35000.0 kPa |
Swing System – Maximum Flow | 202.0 L/min |
SOUND PERFORMANCE
Operator Sound (ISO 6396) | 69.0 dB(A) |
Spectator Sound (ISO 6395) | 103.0 dB(A) |
STANDARDS
Brakes | SAE J1026/APR90 |
Cab/FOGS | SAE J1356/FEB88 ISO 10262 |
The 323D L Series 2 OEM Excavator incorporates innovations to improve your job site efficiency through low owning and operating costs,
excellent performance, and high versatility.
323D2 L OEM STANDARD EQUIPMENT
ENGINE
C7.1 electronic control engine
Meets Tier 3 and Stage III equivalent emission standards
5000 m altitude capability
Radial seal air filters (primary and secondary filter)
Air prefilter
Glow plugs (for cold weather start)
Automatic engine speed control with one touch low idle
High ambient cooling package 52° C (125° F)
Starting kit, cold weather, <–18° C (–0° F)
Water separator with water level indicator sensor
Waved fin radiator with space for cleaning
Two speed travel
Electric priming pump
Power modes (Eco and High Power)
HYDRAULIC SYSTEM
Automatic swing parking brake
Boom lowering device for back-up
High performance hydraulic return filters
Cat Bio-oil capability B20
Capability of installing additional valves, pumps, circuits
Auxiliary hydraulic valve*
Reverse swing damping valve*
Boom drift reducing valve*
Stick drift reducing valve*
CAB
Pressurized ROPS certified cab
Positive filtered ventilation
Adjustable armrest
Seat belt, retractable (51 mm [2 in])
Fully adjustable air suspension seat, with heater
70/30 split front windshield
Laminated upper front windshield and tempered other windows
Sliding upper door window
Openable front windshield with assist device
Openable roof hatch
Removable lower windshield, within cab storage bracket
Pillar mounted upper windshield wiper and washer
Bi-level air conditioner (automatic) with defroster (pressurized function)
Full color and full graphic LCD display with warning, filter/fluid change, and working hour information
Control lever joysticks, seat integrated
Neutral lever (lock out) for all controls
Travel control pedals with removable hand levers
Radio mounting (DIN size)
12V-10A power supply with two lighter sockets
Two stereo speakers
Beverage holder
Coat hook
Interior lighting
Ashtray and lighter
Storage compartment for lunch box
Capability to install two additional pedals
Sun screen
UNDERCARRIAGE
Idler and center section track guiding guards
Towing eye on base frame
Grease lubricated track GLT2, resin
Heavy-duty rollers
Center track guiding guard
ELECTRICAL
Batteries (2 × 900 CCA)
115 amp alternator
8 kW starter motor
Capability to connect a beacon (Requires additional hardware [relay, switch, beacon, and electric harness])
LIGHTS
Cab mounted working lights
Right working light, storage box mounted
Interior lighting
SAFETY AND SECURITY
Cat one key security system
Door and compartment locks
Signaling/warning horn
Rearview mirrors
Rearview camera ready
Fire wall between engine and pump compartment
Emergency engine shutoff switch
Rear window, emergency exit
Battery disconnect switch
Bolt-on FOGS capability
Cap locks on fuel and hydraulic tanks
Lockable tool box
COUNTERWEIGHT
4.26 mt (9,390 lb) counterweight
Liugong Model
Model Number | Bucket Capacity | Operating Weight | Net Power | Max. Digging Depth |
Compact | ||||
---|---|---|---|---|
CLG904DIIIA | 0.058-0.3 m³ | 4,000 kg | 25.2 kW @ 2,200 rpm | 3,100 mm |
CLG906DII | 0.1-0.28 m³ | 5,900 kg | 36.1 kW @ 2,200 rpm | 3,875 mm |
CLG906DIIIA | 0.1-0.28 m³ | 5,900 kg | 33.7 kW @ 2,200 rpm | 3,875 mm |
CLG908DII | 0.13-0.36 m³ | 7,800 kg | 54 kW @ 2,200 rpm | 4,150 mm |
CLG908DIIIA | 0.13-0.36 m³ | 7,800 kg | 54.3 kW @ 2,200 rpm | 4,150 mm |
Medium | ||||
---|---|---|---|---|
CLG915EIV | 0.6 m³ | 1,5400 kg | 84.3 kW @ 2,200 rpm | 5,470 mm |
CLG922EIV | 0.9-1.1 m³ | 22,800 kg | 119 kW @ 2100 rpm | 6,595 mm |
CLG925EIV | 1.0-1.3 m³ | 25,500 kg | 129 kW @ 2,000 rpm | 6,925 mm |
CLG915EII | 0.6 m³ | 14,300 kg | 80.2 kW @ 2,200 rpm | 5,470 mm |
NA-CLG922D | 0.73-1.2 m³ | 22,000 kg | 105.6 kW @ 2,000 rpm | 6,615 mm |
CLG915DII | 0.36-0.73 m³ | 13,900 kg | 80.2 kW @ 2,200 rpm | 5,470 mm |
CLG915DIIIA | 0.36-0.73 m³ | 13,900 kg | 76.2 kW @ 2,200 rpm | 5,470 mm |
CLG920DII(1) | 0.73-1.0 m³ | 21,500 kg | 102 kW @ 1,950 rpm | 6,615 mm |
CLG920DII(2) | 0.73-1.0 m³ | 21,500 kg | 117 kW @ 2,100 rpm | 6,615 mm |
CLG920EII(1) | 0.9-1.1 m³ | 21,500 kg | 102 kW @ 1950 rpm | 6,595 mm |
CLG920EII(2) | 0.9-1.1 m³ | 21,500 kg | 117 kW @ 2100 rpm | 6,595 mm |
CLG922DII(1) | 0.73-1.2 m³ | 22,000 kg | 102 kW @ 1,950 rpm | 6,615 mm |
CLG922DII(2) | 0.73-1.2 m³ | 22,000 kg | 117 kW @ 2100 rpm | 6,615 mm |
CLG922EII(1) | 0.9-1.1 m³ | 22,000 kg | 102 kW @ 1,950 rpm | 6,595 mm |
CLG922EII(2) | 0.9-1.1 m³ | 22,000 kg | 117 kW @ 2,100 rpm | 6,595 mm |
CLG925DII | 0.8-1.4 m³ | 25,500 kg | 125 kW @ 2,000 rpm | 7,015 mm |
CLG925DIIIA | 0.8-1.4 m³ | 25,500 kg | 129kW @ 2,200 rpm | 7,015 mm |
CLG925LLII | 0.5 m³ | 26,000 kg | 125 kW @ 2,000 rpm | 11,850 mm |
CLG925LLIIIA | 0.5 m³ | 26,000 kg | 129 kW @ 2,200 rpm | 11,850 mm |
CLG925EII | 1.1-1.3 m³ | 25,500 kg | 125kW @ 2,000 rpm | 6,925 mm |
CLG925EIIIB | 1.0-1.3 m³ | 25,500 kg | 129kW @ 2,000 rpm | 6,925 mm |
Large | ||||
---|---|---|---|---|
CLG970EII | 3.7-5.2 m³ | 70,500 kg | 338 kW @ 1800 rpm | 7,180 mm |
CLG930EII(1) | 1.4-1.6 m³ | 31,800 kg | 152kW @ 1,900 rpm | 7,300 mm |
CLG930EII(2) | 1.4-1.6 m³ | 31,800 kg | 156 kW @ 2,100 rpm | 7,300 mm |
CLG936DII | 1.6-2.3 m³ | 36,800 kg | 186 kW @ 2,000 rpm | 7,340 mm |
CLG936DIIIA | 1.6-2.3 m³ | 36,200 kg | 194 kW @ 1,900 rpm | 7,340 mm |
CLG945EII | 2.2 m³ | 45,500 kg | 260kW @ 1,800 rpm | 7,860 mm |
CLG950EII | 2.6-3.6 m³ | 46,500 kg | 260kW @ 1800 rpm | 6,521 mm |
Package-Shipping
Packaging & Shipping