BEIBEN 48M Large-span Lifting Jet Fire Truck
Product Description
BEIBEN 48M Large-span Lifting Jet Fire Truck / Long Span Water Tower
water tank : 2.5 m3, foam tank : 1.5 m3
48m Jib , fire monitor water >80m, foam≥70m . ≥100L/s
Water pump ≥80L/s@1.6MPa ; 170L/s@1.0MPa HD camera
Chassis :ND5440TTZZ13 Beiben truck
Main technical parameters
Overall dimensions: | 12000×2550×3990(mm) | Fuel Type: | Diesel oil |
Total mass: | 42000(Kg) | ||
Net | 37850(Kg) | Rated load mass: | 4000(Kg) |
Approach Angle/Departure Angle: | 17/10 (°) | Front/rear overhang: | 1515/2835(mm) |
Axle Load: | 8600/7800/12800/12800 | Wheelbase: | 1950+4350+1350,1950+4650+1350(mm) |
Number of shafts: | 4 | Maximum speed: | 89(km/h) |
Number of tires: | 12(PCS) | Tire Specifications: | 385/65R22.5 20PR/315/80R22.5 18PR |
Fuel consumption: | (L/100Km) | Number of spring pieces: | 4/4/5 |
Front wheel base: | 2133/2133(mm) | Rear wheel base: | 1874/1874(mm) |
Engine type | Engine manufacturer | Volume (ml) | Power (kw) |
WP13.550 E62 | Weichai Power Co., Ltd. | 12540 | 405 |
Total tank volume :4cbm, tank volume :2.5cbm, foam tank volume :1.5cbm Material of side protection device: aluminum alloy, composed of plane and cross bar, cross bar section height :100mm, cross bar spacing :180mm, and vehicle connection: bolt connection. The main special devices are boom and fire cannon. The work light on the side of the car body is only turned on during operation, and cannot be turned on during driving. |
The minimum unfolding span is 3.3 m
With any support core technology, the outrigger can be deployed for fire fighting operation when supported under any deployment width, which is not limited by the site
Full extension and leveling time of outrigger ≤ 40 s
Maximum working height ≥ 47.5 m
Maximum operating range ≥ 42m
The maximum working range at 3.3 m wide span is ≥ 27m
Each boom when spraying fire extinguishing
The boom fire pump can be linked and can act at will without affecting the injection flow
Boom deployment time ≤ 180s
1 Main technical parameters of the whole vehicle | ||
1.1 Vehicle parameters | Overall dimensions (length, width and height) | Length: 12500mm; width: 2550mm; height: 4000mm |
maximum gross weight | ≤44000kg | |
1.2 Support system | ▲ Minimum expansion span | 3.3m |
▲ any support | With any support core technology, when the leg is supported under any expansion width, the boom can be carried out for fire extinguishing operations, without site restrictions | |
▲ Full leg extension and leveling time | ≤40s | |
1.3 Arm rack system | ▲ maximum workingheight | ≥47.5m |
▲ Maximum working range | ≥42m | |
▲ Maximum working amplitude at a 3.3 m-wide span | ≥27m | |
Whether the boom fire pump can be linked together | It can be linked, each arm can be arbitrarily action, and does not affect the jet flow | |
▲ Arm frame deployment time | ≤180s | |
The rotation Angle | ±360° | |
▲ Operating Angle range of the end boom | -60°~30° (boom 56 is straight as 0°), six arms can be inverted, flexible action without dead Angle | |
1.4 Fire protection system | Rated working flow rate of the whole vehicle | ≥80L/s@1.6MPa |
Fire pump model | Domestic well-known brand | |
Fire gun model | Domestic well-known brand | |
Fire gun maximum range | Water DC range of 80m, foam range of 70m | |
Fire gun horizontal turn angle range | -30°~+30° | |
Fire cannon pitch back to the corner range | -90°~+30° | |
foaming system | International brand class B bubble system | |
Volume of liquid tank | 2m⊃3; water + 1 m ⊃3; class B foam | |
Pipe allows for working pressure | ≥2.5MPa | |
delivery port | 4 DN80 interfaces, external direct supply interface and boom pipe drainage interface are shared with this | |
End water supply port | 1 DN80 interface at the end of the boom | |
Spray protection system | 5,6 arm self-protection spray, protect the end boom and fire gun | |
1.5 Video surveillance system | End camera | High-definition camera, rotating with the fire gun |
Automatic video storage | For 48 hours of continuous memory | |
The rear video shows | 10 inches and above HD LCD screen | |
Remote control video display | A 7-inch HD LCD screen | |
1.6 Driving parameters | maximum speed | ≥85km/h |
1.7 Other | Control mode | Close control: 50 meters wired remote control (optional): 150 meters wireless remote control |
Emergency recovery power | Gasoline engine pump set | |
1.8 Thermal insulation configuration in the cold area | The fire truck pump room is equipped with warm device to meet the normal use in winter in northern China | |
2 Chassis configuration and parameters | ||
2.1 Emission standards | EURO 5-6 VI | |
2.2 Rated engine power | ≥400kW | |
2.3 ▲ engine maximum torque | ≥2500N.m | |
2.7 Top vehicle speed | ≥85km/h | |
2.9, the gearbox | A 12-gear manual transmission, with a synchronizer, I gear speed ratio of 15 | |
2.10 Rated load of one bridge + the second bridge | ≥9000kg+9000kg | |
2.11 Rated load | ≥26000kg | |
2.12 ▲ car frame | The frame width is 300mm high, two layers and frame thickness is 14mm | |
2.13, Electrical system | Power main switch, second hand throttle, off-car start-stop function, CAN bus | |
On-board terminals that meet the requirements of State VI; | ||
Battery specifications and parameters: 180Ah maintenance-free, 212V; | ||
2.14, and the fuel oil system | The 300L aluminum alloy | |
Bring the oil mouth | ||
2.15, the brake system | Service brake type: double-circuit compressed air brake | |
Dynamic adjustment type: EBS + ESC, with ASR function | ||
Parking brake system type: spring energy storage air break brake | ||
Auxiliary brake system type: exhaust brake system + retarder system | ||
2.16 Cab house | Two-door cab, body in white is high strength skeleton + outer skin structure, middle longitudinal beam is composite beam structure; width is 2450mm; the cab meets the requirements of GB 26512-2021 Commercial Vehicle cab crew protection; alarm lights are installed in the cab | |
Automatic air conditioning, air suspension main seat, electric glass lifter, adjustable steering wheel, remote control keys | ||
Four-point spiral spring suspension, flashlight roll | ||
2.17 tires | No inner tire | |
2.19 ▲ minimum distance to ground clearance | ≥300mm | |
3 landing leg | ||
3.1 Type 1 | Type X (front expansion, rear swing) | |
3.3 Minimum expansion span | 3.3m | |
3.4 Leg position detection system | Both front and posterior legs are equipped with real-time position detection device | |
3.5 Support position support | Full leg extension, one side and any position support can be used | |
3.6 Leg operation | Automatic deployment and leveling, and the emergency state can be manually operated | |
3.7 Off-ground detection | Upper inner hidden type, safe and reliable | |
4 Arm rack and rotation | ||
4.1 Number of boom joints / type | 6 Folding arms | |
4.2 Maximum working height | ≥47.5m | |
4.3 Maximum working range | ≥42m | |
4.4 Arm rack operation mode | Wired remote control, wireless remote control (optional), tail operation panel close control, manual multi-channel valve operation | |
4.5 Swing-back mechanism | The motor drives the reducer to achieve ± 360° continuous rotation | |
5 fire extinguisher system | ||
5.1 Rated working flow rate of the whole vehicle | ≥80L/s@1.6MPa | |
5.2 Model of fire pump | Famous domestic brands | |
5.3 Rated flow rate of the fire pump | ≥170L/s@1.0MPa | |
5.4 Fire gun type | Domestic known, famous brand | |
5.5 Fire gun rated flow rate | ≥100L/s | |
5.6 Fire gun type | Electric remote control gun, can realize the elevation, swing and DC-spray conversion, the installation position of the rear of the boom (the end of the six arms) | |
5.7 Foam system | International brand class B bubble system | |
5.8 Adjustment range of foam mixing ratio | 0.5%~10% | |
5.9, and the vacuum pump | Electric vacuum pump | |
5.10 Pressure bearing capacity of boom pipe | 2.5MPa | |
5.11 Rated diameter of the boom pipe | DN125mm, Low pressure loss | |
5.12, pipe material | Stainless steel pipe + aluminum alloy pipe | |
5.13, fire interface [buckle] | Water suction mouth | 2 DN150 interfaces |
Water injection outlet | With 4 DN80 interfaces | |
delivery port | With 4 DN80 interfaces | |
External injection foam mouth | 1 DN65 interface | |
The foam mouth is absorbed | 1 DN50 interface | |
End water supply port | 1 DN80 interface | |
5.14 Carrying liquid tank material | Stainless steel, top and side plate thickness 4mm, partition 3mm, bottom plate thickness 3mm internal passivation corrosion treatment, top anti-skid treatment; tank with 10 years warranty | |
5.15 Tank connection mode | elastic fixing | |
5.16 Force collector | Broken-shaft force collector (with cooler) | |
6 Security protection system | ||
6.1 Emergency functions | All hydraulic valves are provided with emergency mechanical operation; the system has an emergency power unit for closing the boom and legs during engine and oil pump failure | |
6.2 Interlock on and off the bus | The arm shall not leave the main support; the arm shall not move without the main support | |
6.3 Buffer protection of the boom | Limit position and sudden operating handle, the system can automatically achieve acceleration and deceleration | |
6.4 Arm frame limit protection | Depending on the leg support position, the program automatically restricts the arm movement at the allowable working posture | |
6.5 Table table protection | When the arm frame is closed, it can be automatically matched | |
6.6 Waterway overpressure protection | When the water channel exceeds the pressure, the safety valve overflows | |
6.7 Notary protection of the fire pump | Prevent damage to the fire pump from idling | |
6.8 Overpressure protection of the water tank | DN100mm Aore water outlet, automatic overflow device at 0.1MPa pressure to prevent accidental overpressure | |
6.9 Soft-leg protection | When the arm frame is in the process of action, the legs appear off the ground, with the automatic sound and light alarm function, and allows the arm frame to move in the safe direction | |
6.10 constant speed control of fire pump | When the fire pump works, adjust the attitude of the boom, and the program will automatically control the movement speed of the boom, and the speed of the fire pump is always constant | |
6.11 Arm frame limit protection | When the boom approaches the limit range, it can automatically stop slowly | |
6.12 Swing-back buffer protection | When the rotation stops suddenly, the system can effectively buffer | |
6.13 Arm stand against interference protection | The inherent procedure limits on the points of possible interference and interference with the car body to ensure that no interference and collision occur during misoperation | |
6.14 Leg action alarm | When leg movement, sound and light prompt to prevent collision | |
6.15 legs not recovered in place | Cab light alarm prompt, to prevent driving accidents | |
6.16 Equipment box door is not closed prompt | Cab light alarm prompt, to prevent driving accidents | |
6.17 No bit cue was received from the boom | Cab light alarm prompt, to prevent driving accidents | |
7 electrical system | ||
7.1 Special motion controller | Special motion controller, adapted to the large range of temperature change, high vibration, high impact, strong electromagnetic interference and other harsh working environment | |
7.2 Industrial-grade display screen | Industrial display screen, strong, waterproof and seismic, adapt to high and low temperature environment and other harsh working environment | |
7.3 Video surveillance system | The rear 10 inch and above bright LCD color display + remote control 7 inch and above bright LCD color display + over 48 hours of local continuous storage | |
7.4 Remote data monitoring module | With real-time positioning function, working condition data monitoring | |
7.5 Warning light alarm system | Red alarm lights on the top of the cab, red left and right on the rear of the cab. The alarm is integrated in the cab with fire alarm sound, siren sound, external propaganda and other functions | |
7.6 Vehicle wiring harness | The whole car adopts the wiring harness and protection level not less than IP67 connector design | |
7.7 Electric control leg operation box | Integrated leg deployment, retraction and leveling operation | |
7.8 Cable reel | 50 m special cable drum | |
7.9, and the sensor of the | Adopt high reliability brand (pressure, displacement, angle, etc.) | |
7.10 Centralized power distribution box | The vehicle adopts independent power distribution system design | |
7.11 Close control operation panel | The rear of the body is equipped with integrated near control operation panel, including engine start and stop, waterway operation, emergency boom operation, lighting operation, status indication and other functions | |
7.12 Operation of the fire pump | Fire pump remote control, close control one key start, stop | |
7.13 Emergency electronic control operation of the boom | Close control panel electronic control operation, as the backup of the remote control operation | |
7.14 Easy operation of the boom | The boom is extended and closed with one key | |
7.15, warning lamp fixtures | Yellow strobe lights are provided on the top of the legs and on the arms | |
7.16, lighting fixtures | Each operation office and the equipment box are equipped with lighting | |
7.17 360 panoramic driving auxiliary system | 7 inches and above in the cab + reversing radar + panoramic camera around the car + dashcam | |
7.18 Automatic charging and separation device | Configure the battery automatic separation inflatable charging device | |
7.19 Cab power interface | The cab is equipped with DC12V, DC24V and AC220V charging ports | |
7.20 Remote control | Integrated video surveillance, boom operation, fire gun operation, fire pump operation and other functions | |
8 hydraulic pressure system | ||
8.1 Hydraulic system type | Variable pump + proportional valve system (international brand) | |
8.2 System pressure | ≥35MPa | |
8.3 Arm-operating valve | International brand hydraulic pilot high-performance solenoid proportional valve | |
8.4 Leg operating valve | International brand hydraulic pilot high-performance solenoid proportional valve, leg automatically spread leveling | |
8.5, emergency pump | One gasoline engine emergency pump unit | |
8.6, and the oil filter | Configure the famous brand filter, the filter accuracy of 10 μ m, and with the filter element blockage indication | |
8.7 Balancing valve and the core hydraulic components | Famous brand | |
9 Body and box | ||
9.1 Material material | The skeleton is made of high strength aluminum alloy profile, the plate is all aluminum alloy plate and skin for anodic oxidation treatment | |
9.2 Structure | The skeleton of the equipment box is made of high strength aluminum alloy profile, and the hidden type. The high strength structure is bonded between the plate and the skeleton. The outer surface of the car body is smooth, smooth and beautiful, effective shock absorption and avoid loosening | |
9.3, rolling shutter door | The aluminum alloy shutter door with lock can be opened with 1 key, light and flexible, good sealing, waterproof and dustproof function; each equipment box has lighting, controlled by the shutter door | |
10 Optional list | ||
11.1 Wireless remote control function | Wireless remote control, charger 2 (220V, 24V each 1), 2 batteries | |
12 Random attachment | ||
12.1, fire hose 25-80-20 | 10 | |
12.2 Fire emergency lighting lights | 2 | |
12.3 Dry powder fire extinguisher | 1 | |
12.4 Water pipe ABC wrench | 2 | |
12.5 suction pipe wrench | 2 | |
12.6 Ground fire hydrant wrench | 1 | |
12.7 Water-collector | 1 | |
12.8 Underground fire hydrant wrench | 1 | |
12.9, KXK80 internal buckle / 80 males | 2 | |
12.10 KXK80 buckle / 80 females | 2 | |
12.11 Ointerface KJK65 male / 80 females | 2 | |
12.12 Special interface KJ 65 / 80Z | 2 | |
12.13, the external suction foam tube | 1 | |
12.14, automatic winer YD | 1 | |
12.15 leg pads | 4 | |
12.16 One set of common seals | A set | |
12.17 Fire Engine Manual (digital printing) | Two sets | |
12.18 Fire truck operation training video U disk | 1 | |
12.19 active wrench 375GB4440 | 1 | |
12.20, hexagonal wrench 1.5-12GB5356 10 set | A set | |
12.21 Wire forceps 180QB2442.1 | 1 | |
12.22 Slip forceps 160QB2440.1 | 1 | |
12.23, double-headed dumb wrench 3236GB4388 | 1 | |
12.24, SL-451S-B | 1 | |
12.25, Random Toolbox BC19 ″ | 1 | |
12.26,5.5-32GB4388 16 piece set | A set | |
12.27 Plum Wrench Set 5.5-32GB4388 | A set | |
12.28, one-word screwdriver 5200 | 1 | |
12.29, cross screwdriver 5200 | 1 | |
12.30 Foam gun head | 1 | |
12.31 Chassis spare tire | 1 |
keystone Vessel Industrial Gas Cylinders| ISO Tank| Pressure Vessel| UN Portable Tanks- Dong Runze Special Vehicle