Air Spring Assembly Trailer Truck BPW Axle 05.429.43.51.0 BPW Air Spring Cylinders

V

X

H

B

C

D

1

Airbag assembly 

BPW 

Air Spring Cylinders

36

05.429.43.51.0

45/80

70/120

180

210

25

95

2

Airbag assembly 

/Air Spring Cylinders

30 K

05.429.43.21.0

0/20/60

70

135

150

25

73

i. Type: Spring Brake Chamber

ii. Model: T16, T20, T24, T30, T36; and T16/24, T24/30, T30/30 DD DP;

iii. Surface: Golden or Black;

iv. Working Pressure: 800Kpa;

v. Min. Working Pressure: 1Kpa;

vi. Pushrod stroke: 0-76mm;

vii. Ambient Temperature: -40℃ ~ +80℃;

viii. Life-time: ≥1,000,000 times;

ix. Leading Standard: SAE J1469-95;

x. Certificate: ISO/TS16949

24

Name:   air springs suspension supplier or Air Spring Cylinders

assembly 

Air Suspension Spring     

Orignal BPW Parts No: 05.429.40.01.0

i. Material: Rubber bellows, steel piston;

ii. Air inlet/Air fitting: M 22;

iii. BPW Number: 0542941221;

iv. Contitech: 4881 N P02 ** CA/4881N P02/4881NP02;

v. OD cover plate: 311,5 mm;

vi. Firestone: W01 M58 8602/W01-M58-8602/W01M588602

24

Name: Compressed Air Lubricating Regulator Filter

i. Function: Suitable for filtering the air, adjusting the pressure and lubricating the compressed air network;

Technical specs:

ii. Package Contents: 1 regulator lubricator Set;

iii. Maximum Working Pressure: 145 lbf/in⊃2;/10 kgf/cm⊃2;;

iv. Diameter and type of lubricator regulator output thread: 1/2 "NPT female;

v. Diameter and type of lubricator regulator inlet thread: 1/2 "NPT female;

vi. lubricator regulator set the gauge connection thread: 1/4 "NPT;

vii. lubricator regulator set working temperature: 5 ° C to 60 ° C;

viii. Capacity of the lubricator cup of the oil regulator set: 120 ml

4

Name: Air Interlock Valve and Steam Recovery

Function: accessory installed at the bottom of the loading adapters, to lock the brake by the driver, out of the truck.

4

Name: Gaskets for fuel loading and unloading valves

Function: to seal the fuel leakage during the bottom valve closing, after filling the tank, and also to prevent communication between the chambers

Valve diameter: 102mm

Length: 136 (138)mm

Width: 136mm

Diameter of screw fixing hole: 13mm

Gasket thickness: 3mm

40