Shanghai, China
80000
T/T
1
Wastewater Sewage Sludge Treatment Biosolids Loading System Sewer Vacuum Cleaning Jetting Truck
Dongfeng Sewage Treatment Truck Sewage Septic Tank Truck Waste Water Purification Truck for Fecal Water Separation
This Truck mounted ingenious machine turns feces into Clean water
Municipal wastewater, or sewage, refers to water that has been used in urban and suburban area homes or businesses for washing, bathing, and flushing toilets. Municipal wastewater also may include water from industrial sources. To remove chemicals or pollutants resulting from industrial processes, industrial contributors to municipal wastewater systems must pretreat their wastewater before it is discharged into the sewerage system. The wastewater is conveyed via the sanitary sewerage system to a centralized wastewater treatment plant (sometimes called a Publicly Owned Treatment Works, or POTW). At the POTW, the sewage passes through a series of treatment steps that use physical, biological, and chemical processes to remove nutrients and solids, break down organic materials, and destroy pathogens (disease-causing organisms) in the water. The rejuvenated water is released to streams and rivers, or may be sprayed over large areas of land.
Preliminary treatment of raw sewage involves screening to remove large objects such as sticks, bottles, paper, and rags, and a grit removal stage during which inorganic solids (sand, grit, cinders) rapidly settle out of the water. The screenings and grit removed in this stage of treatment typically are landfilled and do not become part of the sewage sludge.
Primary treatment involves gravity sedimentation and flotation processes that remove approximately half of the solid material that enters this stage. Solid material (both organic and inorganic) that settles out during this stage of treatment is drawn from the bottom and constitutes the primary sludge. In most POTWs, the floating material (oil, grease, wood, and vegetable matter) that is skimmed from the water surface during primary treatment is disposed of separately and does not become part of the primary sludge.
Secondary treatment is a carefully controlled and accelerated biological process in which naturally occurring microorganisms are used to degrade (break down or digest) suspended and dissolved organic material in the wastewater. This material is converted into carbon dioxide that is released to the atmosphere and into microbial cell mass.
In secondary sedimentation basins, the microbial cell mass settles to the bottom and is removed. This mainly organic material is called secondary sludge.
Some treatment plants also include tertiary treatment steps designed to further reduce plant nutrients (nitrogen and phosphorus), suspended solids, or biological oxygen demand in the wastewater. Chemically precipitated phosphorus and filtration produce a tertiary sludge.
Finally, the water undergoes disinfection treatment to destroy pathogenic microorganisms. The rejuvenated water is then released to a stream or river or may be sprayed over large areas of land.
Introduction to purification treatment vehicle · H3model | H3 |
Picture | |
Introduction | purification treatment function: solid-liquid separation, liquid medicine mixing, fecal classification system and independent power generation. The biggest advantages of this model: 1The whole equipment and core parts are made of 304 stainless steel, which increases the service life of the equipment and reduces the maintenance cost. 2The front-end garbage separation adopts the spiral extrusion separation technology, which has made a breakthrough in the previous technology. The parts are movable assembly and combination, which is convenient for disassembly, maintenance and repair, and fundamentally solves the problem of "blockage". 3The fecal water separation system adopts the stacked screw sludge dewatering technology. Through technical improvement, the screw two-way operation is successfully realized, which skillfully avoids the common blockage problem of the traditional dehydrator.At the same time, the treatment speed is improved and the moisture content of mud cake is reduced. 4Two models have been introduced. On the basis of the original carbon steel, an all stainless steel product has been added to increase customer selectivity. |
Incidental parts | One generator, one electric box, one set of fecal suction pipe and four sets of joints |
Serial number | entry name | Company | parameter |
1 | Overall dimension (length)×wide×High) | m | 4.2*2.2*2.4 |
2 | Vehicle specification | m | 5995*2200*3600 |
3 | the stipulated number of personnel | people | 3 |
4 | Curb weight | t | 5.5 |
5 | Loading volume | m³ | ≥3.16 |
6 | Compression box (long)×wide×High) | m | 1.72*0.8*0.9 |
7 | Front end press | set | 1 |
8 | Vacuum pump | kw | 7.5 |
9 | Dosing pump | kw | 1 |
10 | Maximum negative pressure of vacuum pump | KPa | - 80 |
11 | Liquid medicine suction pump | kw | 0.75 |
12 | Vacuum pump water tank (L * w * h) | m | 1.5*0.23*0.85 |
13 | Inspection port (length * width) | m | 0.57*0.47 |
14 | Height of slag outlet | m | 1.35 |
15 | Maximum pumping speed | m³/h | 50 |
16 | Maximum processing speed | m³/h | 20 |
17 | Maximum suction lift | m | 8 |
18 | Max Power consumption | Degree / h | 18 |
19 | Equipment generator | kw | 30 |
20 | Maximum fuel consumption | L | 4 |
21 | Ring test compressor (diameter) | mm | 350 |
22 | Liquid medicine mixer | kw | 0.4*3 |
23 | Mixing mixer | kw | 0.4*1,1.1*1 |
24 | Motor inductor | w | 0.01 |
25 | Electric gate valve | w | 180 |
26 | Dongfeng chassis model | model | EQ1070SJ3BDF |
27 | Vehicle engine | model | YC4E115-50 |
28 | Chassis power | kw | 85 |
29 | wheelbase | mm | 3306 |
30 | Tire specification | 7.50-16 8PR | |
31 | Vehicle license plate | Yellow card | |
32 | emission standard | Euro 3-6 |
★★ technical specifications and parameters of 30kW Weifang series diesel generator set ★★★ | |
★ technical parameters of generator set: | |
Unit model: hq30gf | Steady state voltage regulation rate (%): ≤± 1 |
Output power: 30KW | Voltage fluctuation rate (%): ≤± 0.5 |
Power factor: cosΦ=0.8 (lag) | Transient voltage regulation rate (%): + 20 ~ - 15 |
Output voltage: 400V / 230V | Voltage stabilization time (s): ≤ 1 |
Output current: 54a | Steady state frequency adjustment rate (%): ≤± 1 |
Rated frequency: 50Hz | Frequency fluctuation rate (%): ≤± 0.5 |
Rated speed: 1500rpm | Transient frequency adjustment rate (%): + 10 ~ - 7 |
Fuel grade: (standard) 0# light diesel (normal temperature) | Frequency stabilization time (s): ≤ 3 |
Overall dimension: 1650×six hundred and fifty×1300(L×W×H (mm, Ref.) | Fuel consumption (100% load): 224g / kW · H |
Unit weight: 600kg (Reference) | Noise (lp7m): 105dB (a) |
★ technical parameters of diesel engine: | |
Brand / origin: Weifang Diesel Engine | Cooling mode: closed water circulation cooling |
Oil engine model: zh4100d | Oil supply mode: direct injection |
Number of cylinders / lifting structure: 4 / L type | Speed regulation mode: mechanical speed regulation |
Cylinder bore stroke: 100×115 mm | Air inlet mode: natural suction |
Compression ratio: 19.0:1 | Overload capacity: 110% |
Start mode: DC12V electric start | Speed: 1500rpm |
★ technical parameters of generator: | |
Motor brand: | Protection grade: IP21 |
Motor model: hqf-30 | Wiring mode: three-phase four wire, Y-type connection |
Rated power: 30KW | Regulation mode: AVR (automatic voltage regulator) |
Rated voltage: 400V / 230V | Output frequency: 50Hz |
Insulation class: Class H | Output factor: cosΦ=0.8 (lag) |
Wastewater Sewage Sludge Treatment Biosolids Loading System Sewer Vacuum Cleaning Jetting Truck
Dongfeng Sewage Treatment Truck Sewage Septic Tank Truck Waste Water Purification Truck for Fecal Water Separation
This Truck mounted ingenious machine turns feces into Clean water
Municipal wastewater, or sewage, refers to water that has been used in urban and suburban area homes or businesses for washing, bathing, and flushing toilets. Municipal wastewater also may include water from industrial sources. To remove chemicals or pollutants resulting from industrial processes, industrial contributors to municipal wastewater systems must pretreat their wastewater before it is discharged into the sewerage system. The wastewater is conveyed via the sanitary sewerage system to a centralized wastewater treatment plant (sometimes called a Publicly Owned Treatment Works, or POTW). At the POTW, the sewage passes through a series of treatment steps that use physical, biological, and chemical processes to remove nutrients and solids, break down organic materials, and destroy pathogens (disease-causing organisms) in the water. The rejuvenated water is released to streams and rivers, or may be sprayed over large areas of land.
Preliminary treatment of raw sewage involves screening to remove large objects such as sticks, bottles, paper, and rags, and a grit removal stage during which inorganic solids (sand, grit, cinders) rapidly settle out of the water. The screenings and grit removed in this stage of treatment typically are landfilled and do not become part of the sewage sludge.
Primary treatment involves gravity sedimentation and flotation processes that remove approximately half of the solid material that enters this stage. Solid material (both organic and inorganic) that settles out during this stage of treatment is drawn from the bottom and constitutes the primary sludge. In most POTWs, the floating material (oil, grease, wood, and vegetable matter) that is skimmed from the water surface during primary treatment is disposed of separately and does not become part of the primary sludge.
Secondary treatment is a carefully controlled and accelerated biological process in which naturally occurring microorganisms are used to degrade (break down or digest) suspended and dissolved organic material in the wastewater. This material is converted into carbon dioxide that is released to the atmosphere and into microbial cell mass.
In secondary sedimentation basins, the microbial cell mass settles to the bottom and is removed. This mainly organic material is called secondary sludge.
Some treatment plants also include tertiary treatment steps designed to further reduce plant nutrients (nitrogen and phosphorus), suspended solids, or biological oxygen demand in the wastewater. Chemically precipitated phosphorus and filtration produce a tertiary sludge.
Finally, the water undergoes disinfection treatment to destroy pathogenic microorganisms. The rejuvenated water is then released to a stream or river or may be sprayed over large areas of land.
Introduction to purification treatment vehicle · H3model | H3 |
Picture | |
Introduction | purification treatment function: solid-liquid separation, liquid medicine mixing, fecal classification system and independent power generation. The biggest advantages of this model: 1The whole equipment and core parts are made of 304 stainless steel, which increases the service life of the equipment and reduces the maintenance cost. 2The front-end garbage separation adopts the spiral extrusion separation technology, which has made a breakthrough in the previous technology. The parts are movable assembly and combination, which is convenient for disassembly, maintenance and repair, and fundamentally solves the problem of "blockage". 3The fecal water separation system adopts the stacked screw sludge dewatering technology. Through technical improvement, the screw two-way operation is successfully realized, which skillfully avoids the common blockage problem of the traditional dehydrator.At the same time, the treatment speed is improved and the moisture content of mud cake is reduced. 4Two models have been introduced. On the basis of the original carbon steel, an all stainless steel product has been added to increase customer selectivity. |
Incidental parts | One generator, one electric box, one set of fecal suction pipe and four sets of joints |
Serial number | entry name | Company | parameter |
1 | Overall dimension (length)×wide×High) | m | 4.2*2.2*2.4 |
2 | Vehicle specification | m | 5995*2200*3600 |
3 | the stipulated number of personnel | people | 3 |
4 | Curb weight | t | 5.5 |
5 | Loading volume | m³ | ≥3.16 |
6 | Compression box (long)×wide×High) | m | 1.72*0.8*0.9 |
7 | Front end press | set | 1 |
8 | Vacuum pump | kw | 7.5 |
9 | Dosing pump | kw | 1 |
10 | Maximum negative pressure of vacuum pump | KPa | - 80 |
11 | Liquid medicine suction pump | kw | 0.75 |
12 | Vacuum pump water tank (L * w * h) | m | 1.5*0.23*0.85 |
13 | Inspection port (length * width) | m | 0.57*0.47 |
14 | Height of slag outlet | m | 1.35 |
15 | Maximum pumping speed | m³/h | 50 |
16 | Maximum processing speed | m³/h | 20 |
17 | Maximum suction lift | m | 8 |
18 | Max Power consumption | Degree / h | 18 |
19 | Equipment generator | kw | 30 |
20 | Maximum fuel consumption | L | 4 |
21 | Ring test compressor (diameter) | mm | 350 |
22 | Liquid medicine mixer | kw | 0.4*3 |
23 | Mixing mixer | kw | 0.4*1,1.1*1 |
24 | Motor inductor | w | 0.01 |
25 | Electric gate valve | w | 180 |
26 | Dongfeng chassis model | model | EQ1070SJ3BDF |
27 | Vehicle engine | model | YC4E115-50 |
28 | Chassis power | kw | 85 |
29 | wheelbase | mm | 3306 |
30 | Tire specification | 7.50-16 8PR | |
31 | Vehicle license plate | Yellow card | |
32 | emission standard | Euro 3-6 |
★★ technical specifications and parameters of 30kW Weifang series diesel generator set ★★★ | |
★ technical parameters of generator set: | |
Unit model: hq30gf | Steady state voltage regulation rate (%): ≤± 1 |
Output power: 30KW | Voltage fluctuation rate (%): ≤± 0.5 |
Power factor: cosΦ=0.8 (lag) | Transient voltage regulation rate (%): + 20 ~ - 15 |
Output voltage: 400V / 230V | Voltage stabilization time (s): ≤ 1 |
Output current: 54a | Steady state frequency adjustment rate (%): ≤± 1 |
Rated frequency: 50Hz | Frequency fluctuation rate (%): ≤± 0.5 |
Rated speed: 1500rpm | Transient frequency adjustment rate (%): + 10 ~ - 7 |
Fuel grade: (standard) 0# light diesel (normal temperature) | Frequency stabilization time (s): ≤ 3 |
Overall dimension: 1650×six hundred and fifty×1300(L×W×H (mm, Ref.) | Fuel consumption (100% load): 224g / kW · H |
Unit weight: 600kg (Reference) | Noise (lp7m): 105dB (a) |
★ technical parameters of diesel engine: | |
Brand / origin: Weifang Diesel Engine | Cooling mode: closed water circulation cooling |
Oil engine model: zh4100d | Oil supply mode: direct injection |
Number of cylinders / lifting structure: 4 / L type | Speed regulation mode: mechanical speed regulation |
Cylinder bore stroke: 100×115 mm | Air inlet mode: natural suction |
Compression ratio: 19.0:1 | Overload capacity: 110% |
Start mode: DC12V electric start | Speed: 1500rpm |
★ technical parameters of generator: | |
Motor brand: | Protection grade: IP21 |
Motor model: hqf-30 | Wiring mode: three-phase four wire, Y-type connection |
Rated power: 30KW | Regulation mode: AVR (automatic voltage regulator) |
Rated voltage: 400V / 230V | Output frequency: 50Hz |
Insulation class: Class H | Output factor: cosΦ=0.8 (lag) |
6 pcs Metal Alky T21 UN3394 UN3399 Portable Tank TEAL DEAC MAO to SGP Max. gross weight : 4000 kg Tare : 1050 kg Payload : 2950 kg Portable Tank instruction : T21 ADR/RID tank code : N/A Special provisions : TP2 TP7 TP36 TP41 Model : KS1880-T21 ISO size/type code : N/A Type : UN Portable Tank Dimensions : 1148(E.D) x2128 (L) x1388 (H) mm Nominal capacity : 1880 L Measured capacity : 1880 L at 20°C Maximum allowable working pressure : 14 bar Test pressure : 21 bar APPROVALS ADR/RID: F/9151/BV/23 IMDG: F/BV/23/194-T21 US DOT: UN Portable Tank TIR*: GB/C 26839 BV/2023 SUBSTANCES SUITABLE FOR TRANSPORT: In accordance with the requirements of the applicable regulations and the construction of the tank and its equipment. (Substances not compatible with the tank and/or its accessories are excluded for transport) UN3394 & UN3399
Customized Hydrochloric Acid HCL Tank Container Lined PE 24m3 for Trailer Mounted to Vietnam TANK CONTAINER VOLUME 24M3 STEEL SHEET 5MM, HEAD 6MM,Lined LLDPE 16mm for Hydrochloric Acid, Sulfuric Acid Transport 3 CHAMBERS HS CODE: 7309.00
6 units Metal Alky C480 Portable Tank TEAL DEAC Cylinder for Singapore 360 DEG. ROTATABLE TOP FLANGE VALVE (KV-MTFF DN15 PN 40), 360 DEG. ROTATABLE TOP FLANGE VALVE (KV-MTFE DN20 PN 40) K4430 Gaskets
6 Units 40KL 44KL 40FT ISO Steel Lined PE dilute sulfuric acid Tank Container to Kazakhstan40FT Tank Container PE Lined TankUsed to contain: HCl (max 35%), NaOH (max 50%), PAC (max 17%),H2SO4(max 94%) etc…Sulphuric Acid Tank Capacity: 40,000 Liters;44,000 LitersSteel sheet 6mm, head 6mmLiner thickness: 16mm PE01p
2 Sets HOWO Offroad AWD 6x6 Mixing And Charging ANFO Explosive Trucks Delivery
10 Units Hydrochloric Acid HCL PE LINED ISO Tank Containers to Vietnam 20FT Tank Container PE Lined Tank Used to contain: HCl (max 35%), NaOH (max 50%), PAC (max 17%),H2SO4(max 94%) etc… Tank Capacity: 21,900 Liters Steel sheet 6mm, head 6mm Liner thickness: 16mm PE
17m3 , 22m3 Lined PE Tank Container for Hydrochloric Acid HCL to Vietnam 20FT TANK CONTAINER TANK VOLUME/ STEEL THICKNESS 22M3/ 6MM (SOC / EMPTY AND NEW TANKS) BRAND: DONG RUNZE MODEL: DRAU2308018 STORAGE TANK CONTAINER TANK FOR HCL CARGO TRUCK TANK VOLUME/STEEL THICKNESS:17M3/ 6MM ( EMPTY AND NEW TANKS) BRAND: DONG RUNZE MODEL: DTA5260 HS CODE : 7309000000
4 Sets Polyethylene Lined Steel Offshore T14 Tanks For Hydrochloric Acid Transport to Kazakhstan Marks DTAU2305012 DTAU2305028 DTAU2305033 DTAU2305049
80Units Metal Alky C480 UN Portable Tank T21 TEAL Cylinders to USA 80Units UN T21 Portable Tank Container 1880L Cylinder For TEAL Metal Alkyls UN3394 UN3399 to USA Adr/Rid Organometallic Substance, Liquid, Water- Reactive C-430 Saddle Type Portable Tank , tank capacity 1630L C-480 Saddle Type Portable Tank, tank capacity 1880L C-1980 TEAL TMGa ,TEGa,TMIn, TMAl DEAC Metal Alky C-1980 T21 Metal Alky 7495L
6 Sets Polyethylene Lined Steel Tanks 6600Gallon For Hydrochloric Acid Storage Transport Hydrochloric Acid (HCl) to SAU Chemical Factory This the 4th LOT HCL ,NaCLO Tanks For this SAU Chemical Facttory . The 1 st Order date will go back to Date 13-1-2021. CAST IRON STORAGE TANK FOR CHEMICAL MATERIALS STORAGE TANK CAPACITY: 25M3 HS CODE:7309000000
3 Sets Lined PE Tanks 6604Gallon For Storage Transport Sodium Hypochlorite to Saudi Arabia FROM WUHAN PORT CHINA TO DAMMAM, SAUDI ARABIA BY SEA. + Port of loading : WUHAN PORT + Port of unloading :DAMMAM CAST IRON STORAGE TANK FOR CHEMICAL MATERIALS STORAGE TANK CAPACITY: 25M3 HS CODE:730900 10.2x2.1x2.5*3 160.65cbm 3X40HQ
4PCS Power Take-off PTO FOR JMC TRANSMISSION MODEL DN3-7003-EC 6MT1420 to URUGUAY Sdq51/65 (Gearbox Power Take off For ISUZU QINGLING Transmission DN3-70030-E0, 6MT1420 PTO Assembly) HWP-G32/65CHQ ,32/65 PQ1
12PCS PTO Wanliyang Transmission Power Take-off For WLY6T40 WLY6TS40 to Mexico 1 PC SDQ211/60LGQ1 PTO FOR 6DS60T-D TO SAUDI ARABIA
2 Units Righ Hand Drive Shacman F3000 Hydro Excavators Truck Combined Vacuum Sewer Jetting to Suva Port Fiji Shacman F3000 Hydro Excavators Truck Sewer Jet Suction Units (RHD 13500L Sewage+4000L Clean Water ) PTO, transmission shaft, vacuum pump, tanker, hydraulic system and jetting pipe system. Combined Sewer Suction & Jetting Unit SZW Aluminium Alloy Liquid Water Ring Compressor Vacuum Pump XW-2800 VAC Flow 2800 M³/h ,1648 Cfm 46.7M3/min 75KW
6 Sets Lined PE Tanks 6604Gallon For Storage Transport Hydrochloric Acid (HCl) to Saudi Arabia FROM WUHAN PORT CHINA TO DAMMAM, SAUDI ARABIA BY SEA. Port of loading : WUHAN PORT + Port of unloading :DAMMAM DONG RUN ZE CAST IRON STORAGE TANK FOR CHEMICAL MATERIALS STORAGE TANK CAPACITY: 25M3 HS CODE:7309000000 9.7x2.2x2.5*6