Equipment For Sale

 EMAIL:Sale@tictrucks.com
TEL:  86-152-71357635    
MOB: 86-152-71357675
ADD: NO.1 TAIZONG AVENUE GAOQIAO INDUSTRY PARK TAIWANESE    INVESTMENT AREA DONGXIHU DISTRICT WUHAN CITY, HUBEI PROVINCE, P.R CHINA
Share to:

Liquid Ammonia Storage Tank 80cbm-100cbm Anhydrous Liquid Ammonia (Liquid NH3 Pressure Vessel) Also Good for Dimethyl Ether, Butane, Cooking Gas

Quantity:
  • Shanghai, China
  • 8000
  • T/T
  • Liquid Ammonia Storage Tank
  • Horizontal / Vertical
  • Propane, Liquid Ammonia
  • Dong Run Ze
  • Nil
  • OEM
  • China
  • 73090000
  • New
  • Customized
  • Metal Tank
  • Middle Pressure Storage & Transportation Equipment
  • Liquid, Gas
  • Q235 or Q345 .Q245.R20 + PE (Plastic )16mm -22mm
Liquid Ammonia Storage Tank 80cbm-100cbm Anhydrous Liquid Ammonia (Liquid NH3 Pressure Vessel )
Tank Volume (m³) loading mass (ton) standard and configuration
1 Liquid ammonia tank 10 5.2 Execution standard: GB150 "pressure vessel" and "fixed pressure vessel safety technology and supervision code" design pressure: 21.6 design temperature: 50 ° c filling ratio: 0.52 corrosion allowance: material: 2 mm subject Q345R
2 20 10.4
3 Liquid ammonia tank 25 13
4 32 16.64
5 Liquid ammonia tank 50 26
6 60 32.2
7 Liquid ammonia tank 80 41.6
8 100 46.8


Butane Tank Horizontal Storage 40m3 (Pressure Vessel ) for LPG Gas Propane, Liquid Sulfur Dioxide, Isobutane, Dimethyl Ether



Propane design pressure of 1.77 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.42 T/M3

Design of liquid ammonia pressure of 2.16 MPa design temperature 50 ºC corrosion allowance 2 mm density of 0.52 T/M3

Propane design pressure of 1.77 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.42 T/M3

Propane design pressure of 2.16 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.43 T/M3

Liquid sulfur dioxide design pressure of 0.98 MPa design temperature 50 ºC corrosion allowance 4 mm density of 1.2 T/M3

Gas pressure is 4.1 MPa design temperature 50 ºC corrosion allowance of 1.4 mm

Propane design pressure of 1.77 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.42 T/M3

Isobutane design pressure of 0.79 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.49 T/M3

Dimethyl ether design pressure of 1.15 MPa design temperature 50 ºC corrosion allowance 1 mm density of 0.58 T/M3

Detail Picture


Liquid Ammonia Storage Tank 80cbm-100cbm Anhydrous Liquid Ammonia (Liquid NH3 Pressure Vessel) Also Good for Dimethyl Ether, Butane, Cooking Gas
Liquid Ammonia Storage Tank 80cbm-100cbm Anhydrous Liquid Ammonia (Liquid NH3 Pressure Vessel) Also Good for Dimethyl Ether, Butane, Cooking Gas
Liquid Ammonia Storage Tank 80cbm-100cbm Anhydrous Liquid Ammonia (Liquid NH3 Pressure Vessel) Also Good for Dimethyl Ether, Butane, Cooking Gas
Liquid Ammonia Storage Tank 80cbm-100cbm Anhydrous Liquid Ammonia (Liquid NH3 Pressure Vessel) Also Good for Dimethyl Ether, Butane, Cooking Gas
Liquid Ammonia Storage Tank 80cbm-100cbm Anhydrous Liquid Ammonia (Liquid NH3 Pressure Vessel) Also Good for Dimethyl Ether, Butane, Cooking Gas

Liquid Ammonia Storage Tank 80cbm-100cbm Anhydrous Liquid Ammonia (Liquid NH3 Pressure Vessel) Also Good for Dimethyl Ether, Butane, Cooking Gas

Main parameter of ASME LPG storage tank

Technical Specification Parameter
Tank Tank name LPG storage tank
Model DT3100-100LAG
Overall dimensions 13024*3244*3830 mm
Inner diameter 3200mm
Vessel type on the ground
Designing pressure 1.91 Mpa
Working pressure 1.61 Mpa
Designing temperature -19~50
Filling medium Liquid petroleum/propane gas
Corrosion margin 1.00 mm
Curb weight 49400kg
Full capacity 100m³
Heat treatment Bulk
Filling factor 520 Kg/ m³
Tanker & pressure parts material Q345R
Hydraulic test pressure 2.22 Mpa
Gas tight test pressure 1.91 Mpa
Produce standard ASME standard and GB150 standard
Optional accessories afety valve,SCL-UHZ(magnetic flap gauge),pressure gauge,thermometer,cut-off valve etc.
Liquid indicator Model UHZ-518C14
Version Magnetic
Nominal pressure 2.5 Mpa
Scope of testing 50~2500 mm
precision 2.5
Safety Valve Model A42F-2.5-80
Version Built-in
Nominal pressure 2.5 Mpa
Nominal radius DN80
Opening pressure 1.68-1.76 Mpa
Re-seating pressure ≥0.8 Mpa opening pressure
Handling System Feed pipe DN80
Drain pipe DN80
Admission port DN50
Sewage outfall port DN80
Vent nozzle port DN80

Tanker LPG gas tanker series list:

Storage tanker (Under ground Horizontal type)

S/N

Name

Model number

Volume

Tanker dimensions(L×W×H)

Thickness of raw material (MM)

Seal head type

Loading weight

(KG)

Tanker weight(KG)

Others

1

lpg storage tank

DT1600-12

12 m3

6270×1620×2255 DN1600×10

δ10

Double oval

4840

3298

2

lpg storage tank

DT2100-25

25 m3

7594×2124×2877 DN2100×12

δ12

Double oval

10080

5688

3

lpg storage tank

DT2400-32

32 m3

7508×2428×3007 DN2400×14

δ14

Double oval

12902

7460

4

lpg storage tank

DT2400-50

50 m3

11483×2428×3028 DN2400×14

δ14

Double oval

20160

10824

5

Propane gas storage tanker

DT2600-50

50 m3

9912×2628×3215 DN2600×14

δ14

Double oval

20160

10229

6

Propane gas storage tanker

DT3000-80

80 m3

11866×3032×3610 DN3000×16

δ16

Double oval

32256

17900

7

Propane gas storage tanker

DT3200-100

100 m3

13010×3236×3716 DN3200×18

δ18

Double oval

40320

21228

8

Liquid ammonium storage tanker

DT2000-20

20 m3

6806×2028×2611 DN2000×14

δ14

Double oval

10188

5585

9

Liquid ammonium storage tanker

DT2200-32

32 m3

8914×2232×2810 DN2200×16

δ16

Double oval

16301

8795

Product Model T-LPG-TK
Structural form Integral type, separated type
Install Method Above-ground,
System Approach OPTIONAL: Double pump system, single pump system
Storage Tank Volume(M 3;) 5, 6, 10,15,20, 30 , 40 , 50 , 60,80, 100 , 125 , 150
Design pressure of storage tank 1.77Mpa
Design pressure of pipe 2.5Mpa
Opening pressure of safety valve 1.75Mpa
Ambient Temperature -40-55°C
Ambint Humidity 10~95%
Dimension of skid-mounted body Up to customer's requirement

Horizontal Storage HCL Acid Tanks Steel Lined LDPE 120000 Liters

For Storage Bleach, Hydrochloric Acid, Ferric Chloride, Oilfield Chemicals, Corrosive Wastes And Other Hazardous Cargoes.

Steel ( 6 mm -8mm ) Lined PE - Plastic 7042 (16mm - 20 mm ) storage tank

storage hydrochloride, hydrogen chlorate, sodium hydroxide,acrylic

acetic acid, glacial acetic acid, hydrogen peroxide

Propionic acid, ammonia,NH3·H2O

other tanks

Horizontal Oil Tank

Horizontal Oil Tank

SS Double Oil Tank

SF Double Oil Tank

Industrial Condenser

U shape Condenser

Tubular surface condenser

Reaction Tower

Pressure Reactor

Pyrolysis Reactor

Horizontal Fuel Storage Tank Cbm For Petroleum Oil,Gasoline, Petrol, Diesel Steel Q235 or Q345 .Q245.R20 thinckness 5.6.8mm - 10.12mm Custermizing 1-100CBM



Acid Storage Tank for Oil Fied Chemical Contain Hydrochloric Acid 120CBM Horizontal

Used to contain: HCl (max 35%), NaOH (max 50%), NaCLO (max 10%), PAC (max 17%), H2SO4 etc



Horizontal / Vertical Storage HCL Acid Tanks Steel Lined LDPE 120000 Liters
For Storage Bleach, Hydrochloric Acid, Ferric Chloride, Oilfield Chemicals, Corrosive Wastes And Other Hazardous Cargoes.
Steel ( 6 mm -8mm ) Lined PE Plastic 7042 (16mm - 25 mm ) storage tank

water tank stainless steel tank /water pump/ High pressure squirt gun
steel option Q235/Q345/ 16 manganese steel/SS201/SS304 /SS316 alummin alloy tanker
acids tanker steel lined plastic for water/alcohol/ethanol acid, alkaline and salt HCL, NaOH ,NaCIO Sodium Hypochlorite NaCIO /hydrofluoric acid HF/CAUSTIC SODA alummin nitric acid
oil/petrol,Fuel diesel/LPG/LNG steel tank with oil pump/ gun fuel truck nozzle
asphalt/bitumen/crude oil tanker/ AN ammonium methana Alcohol burner/steam heating and insulation system ,pump option



Vertical type PE Plastic tank
Capaicty Shell length Total length Diameter Weight Shell thickness EXW Price
1m3 750 mm 930 mm 1300 mm 95(KG) 15 mm $1355~$2060
2m3 1800 mm 1980 mm 1300 mm 150(KG) 15 mm $1565~$2260
5m3 1100 mm 1400 mm 2400 mm 260(KG) 15 mm $1880~$2560
10m3 2200 mm 2500 mm 2400 mm 500(KG) 20 mm $2508~$3560
15m3 3300 mm 3600 mm 2400 mm 680(KG) 20 mm $3850~$5560
20m3 4400 mm 4700 mm 2400 mm 850(KG) 22 mm $5480~$7180
30m3 4400 mm 5040 mm 3000 mm 1350(KG) 25 mm $6490~$8190
40m3 4900 mm 5500 mm 3450 mm 2000(KG) 32 mm $6860~$8560
50m3 6000 mm 6600 mm 3450 mm 2300(KG) 32 mm $11520~$13920

5 cbm/m3
Q235A 5mm+ PE (Plastic )16mm US$7,200.00
10 m3 Q235A 5mm+PE16mm US$9,200.00
20 m3 Q235A 5mm+PE16mm US$11,200.00
30 Q235A 6mm+PE16mm US$13,200.00
40 Q235A 6mm+PE16mm US$15,200.00
50 Q235A 6mm+PE16mm US$17,200.00
60 Q235A 6mm+PE16mm US$19,200.00
70 Q235A 6mm+PE16mm US$21,200.00
80 Q235A 8mm+PE16mm US$23,200.00
90 Q235A 8mm+PE16mm US$25,200.00
100 Q235A 8mm+PE16mm US$27,200.00
110 Q235A 8mm+PE16mm US$29,200.00
120 Q235A 8mm+PE16mm US$30,800.00
130 Q235A 8mm+PE16mm US$32,400.00
135 Q235A 8mm+PE16mm US$34,400.00

manufacturer, supplier and exporter of Acid Storage Tank in China. Storage Tanks are widely used for storing chemicals and acids and can be availed in various models such as horizontal and vertical. These tanks are equipped with best quality stainless steel material and mild steel, extensively used in various industries - such as pharmaceutical, sugar, food and dairy. This storage tank is widely in demand and accepted by our clients.

Being a quality centric organization, our product line includes Plastic Storage Tank, Chemical Storage Tank, Horizontal Storage tank, Bottom Conical Storage Tank and many more. The manufactured range of Acid Storage Tanks is available to the clients in different sizes using high quality design and welding standards. Storage tanks are mostly appropriate for over ground and underground installations and can be used to store acids in safe and secure way.

we cater to the bulk requirements of the clients and strive to offer the best quality products manufactured in compliance with international standards. We have been able to mark our strong foothold as one the leading Manufacturer of Acid Storage Tanks from China

LDPE & HDPE polyethylene resistance listed by chemical
1.4-dioxane LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° shows
some effect after 7 days of constant exposure.
Acetaldehyde LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE at 50C° shows
some effect after 7 days of constant exposure. LDPE - immediate damage may occur.
Acetic Acid 5 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Acetic Acid, glacial 50% LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50 C° -
immediate damage may occur.
Acetone LDPE and HDPE at 20C°-50C° - damage may occur. Not recommended for continuous use.
Allyl Alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Aluminum salts LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Amino acids LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonia LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonium carbonate,
saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonium phosphate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ammonium sulphate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Amyl chloride HDPE at 20C° shows some effect after 7 days of constant exposure. HDPE at 50C° and LDPE at 20C°-50C° -
immediate damage may occur. Not recommended for continuous use.
Aniline LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE at 50C° shows
some effect after 7 days of constant exposure.
Benzene LDPE and HDPE at 20C°-50C° - damage may occur. Not recommended for continuous use.
Benzyl alcohol LDPE and HDPE at 50C° - immediate damage may occur. HDPE at 20C° shows some effect after 7 days of
constant exposure.
Boric acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Bromine LDPE and HDPE at 50C° - immediate damage may occur. HDPE at 20C° shows some effect after 7 days of
constant exposure.
Butyric acid LDPE and HDPE at 50C° - immediate damage may occur. HDPE at 20C° shows some effect after 7 days of
constant exposure.
Calcium chloride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Calcium hydroxide
saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Calcium sulphate No data is available at this time.
Carbon tetrachloride HDPE at 20C° shows little or no damage after 30 days. LDPE at 20C° and HDPE at 50C° show some effect
after 7 days of constant exposure. LDPE at 50C° not recommended.
Chlorobenzene Immediate damage may occur. Not recommended for continuous use.
Chloroform HDPE and LDPE at 20C° show some effect after 7 days. At -50C° - immediate damage may occur. Not
recommended for continuous use.
Chlorine 10% in water HDPE and LDPE at 20C° shows little or no damage after 30 days. LDPE at 50C° shows damage and is not
recommended.
Chromic acid 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Chromic acid 50% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Citric acid 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Cresol HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° show immediate
damage and are not recommended for continuous use.
Cyclohexane LDPE and HDPE at 50C° - immediate damage may occur. HDPE and LDPE at 20C° show some effect after 7
days of constant exposure.
Diethyl ketone LDPE and HDPE at 20C°-50C° - damage may occur. Not recommended for continuous use.
Dimethylsulfoxide LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ethanol 95% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure. Ethyl acetate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ethyl benzene HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° show immediate
damage and are not recommended for continuous use.
Ethylene glycol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Ethylene oxide HDPE at 20C° shows little or no damage after 30 days of constant exposure. LDPE at 20C° and LDPE/ HDPE
at 50C° show some effect after 7 days.
Ferric chloride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Fluoride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Fluorine HDPE at 20C° shows little or no damage after 30 days of constant exposure. LDPE at 20C° shows some effect
after 7 days. Neither HDPE or LDPE are recommended at 50C°.
Formaldehyde 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Formaldehyde 40% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Glycerol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Heating oil No further data is available at this time.
Hexane HDPE at 20C° shows little or no damage after 30 days continuous use and at 50 C° shows some effect after 7
days. LDPE not recommended at any temperature.
Hydrochloric acid 5% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrochloric acid 20% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrochloric acid 35% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrocyanic acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrofluoric acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrofluoric acid 4% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrofluoric acid 48% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrogen peroxide 3% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Hydrogen peroxide 30% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Isobutyl alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Isopropyl acetate No data is available at this time.
Isopropyl alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Kerosene LDPE and HDPE at 20C° show some effect after 7 days. HDPE and LDPE not recommended at 50C°, as
immediate damage may occur.
Lactic Acid 10 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Lactic Acid 90 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Lead acetate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Metallic salts, dissolved No data is available at this time.
Methanoic acid 100% No data is available at this time.
Methanol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Methyl ethyl ketone Immediate damage may occur. Not recommended for continuous use.
Methyl propyl ketone HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° - Immediate damage
may occur. Not recommended for continuous use.
Methylene chloride HDPE at 20C° shows some effect after 7 days. LDPE at 20C°-50C° and HDPE at 50C° - Immediate damage
may occur. Not recommended for continuous use.
Mineral oil LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° may
show immediate damage and is not recommended.
n-amyl acetate LDPE and HDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° shows
some effect after 7 days or constant exposure.
n-butyl alcohol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
n-octane LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Nitric acid 50 % LDPE at 20C° shows little or damage after 30 days. HDPE at 20C° and LDPE at 50C° show effect after 7 days.
HDPE at 50C° shows immediate damage and is not recommended.
Nitric acid 70 % HDPE and LDPE at 20C° show some effect after 7 days. Both at 50C° show immediate damage and are not
recommended.
Oleic acid HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure. LDPE at 20C°-50C° shows
immediate damage and is not recommended.
Oxalic acid LDPE at 20C° shows some effect after 7 days. HDPE at 20C° and both HDPE and LDPE at 50C° show little or
no damage after 30 days.
Ozone HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE and LDPE at
50C° show immediate damage and are not recommended.
Perchloric acid HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. HDPE and LDPE at 50C° show immediate damage and are not recommended.
Perchloric ethylene HDPE and LDPE at 20C°-50C° show immediate damage and are not recommended.
Phenol HDPE and LDPE at 20C°-50C° show immediate damage and are not recommended.
Phosphoric acid 10% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Phosphoric acid 85% HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° shows
immediate damage and is not recommended.
Phosphorous trichloride HDPE and LDPE at 20C° show little or no damage after 30 days of constant exposure. LDPE at 50C° has no
data available. HDPE at 50C° shows some effect after 7 days.
Potassium acetate No data is available at this time.
Potassium bromide No data is available at this time.
Potassium carbonate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Potassium hydroxide 5 % LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Potassium hydroxide
concentrated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Potassium permanganate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Propylene glycol LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Pyridine Immediate damage may occur. Not recommended for continuous use.
Salicylic acid, saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Silver acetate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Silver nitrate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium carbonate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium chloride,
saturated LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium dichromate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium hydroxide 1% LDPE at 20C°-50C° shows little or no damage after 30 days of constant exposure. HDPE at 20C°-50C° shows
some effect after 7 days.
Sodium hydroxide 50% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium hypochlorite 15% HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure. LDPE at 20C° is suitable but
at 50C° shows some effect after 7 days.
Sodium nitrate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sodium sulphate LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sucrose LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulphide No additional information is available at this time.
Sulfuric acid 6% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulfuric acid 20% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulfuric acid 60% LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Sulfuric acid 98% LDPE at 20C°-50C° shows little or no damage after 30 days of constant exposure. HDPE at 20C° shoes effect
after 7 days and is not recommended for use at 50C°.
Tannic acid LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Tetrahydrofuran HDPE and LDPE at 20C° show some effect after 7 day of constant exposure.HDPE and LDPE at 50C° show
immediate damage and are not recommended.
Toluene LDPE at 20C° show some effect after 7 day of constant exposure. HDPE at 20C°-50C° and LDPE at 50C°
show immediate damage and are not recommended.
Trichloracetic acid HDPE and LDPE at 20C° show some effect after 7 day of constant exposure.HDPE and LDPE at 50C° show
immediate damage and are not recommended.
Trichlorethane Immediate damage may occur. Not recommended for continuous use.
Turpentine oil HDPE and LDPE at 20C° show some effect after 7 day of constant exposure. HDPE and LDPE at 50C° show
immediate damage and are not recommended.
Urea LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.
Xylene HDPE at 20C° shows some effect after 7 day of constant exposure. LDPE at 20-50C° and HDPE at 50C° show
immediate damage and are not recommended.
Zinc chloride LDPE and HDPE at 20C°-50C° show little or no damage after 30 days of constant exposure.

Related Products

SUCCESS CASES

More >>

Contact Us

EMAIL:Sale@tictrucks.com
TEL: 86-152-71357675
 WeiChat:king253725877
truck in china weichat made in china truck
 Add:Wuhan Office 1: No.1 Taizong Avenue Gaoqiao Industry Park Taiwanese  Investment Area Dongxihu District Wuhan City, Hubei Province, P.R China
Address CRRC Factory : No. 8 Jiliangdadao,Zengdu Economic Development Zone,Suizhou City, Hubei Province, P.R China P.O. Box 441300  
Address Yuchai DTA Truck Factory : No. 121, Liangshui 1St Road, Zengdu Economic Development Zone Suizhou City, P.R. China  P.O. Box 441300  .......

Hubei Dong Runze Special Vehicle Equipment Co., Ltd. All rights reserved. 2009-2020 XML webmail